Žvejybinė valtis LOBSTER 310


Preis:
Sonderpreis€870,96
Lagerbestand:
Auf Lager

Trumpai apie prekę

Prekė: Žvejybinė valtis LOBSTER 310. Kategorija: Valtys.

  • Gamintojas: no brand
  • Modelis: LOBSTER 310
  • Ilgis: 310 cm
  • Plotis: 130 cm
  • Svoris: 60 kg
  • Spalva: white
  • Medžiaga: laminate

Hello

ZybiBoats is a company with extensive experience. We have been building boats, kayaks and Canadians for nearly 20 years. Our products find customers abroad as well as on the domestic market. If you are looking for good quality at an affordable price, we are here to help.

Today I have to offer you a fishing boat 1-3 person ''Lobster 310''

The LOBSTER group boats include:

Lobster 260 boat 1-2 persons

Lobster 310 boat 1-3 persons

Lobster 380 boat 1-4 persons

The Labster 310 rowing boat is made in the technology of one coat.

The boat can be easily turned upside down and stand on it will certainly withstand, unlike two-coat boats, whose outer coats are thin and hardly any manufacturer will allow the above-mentioned test. In addition, single-walled boats are easier to repair in the event of an impact because there is access everywhere. In the case of two-coat boats, repair is difficult to carry out because the outer jacket is closed with an inner liner and there is no access to the hull from the inside. A big advantage of single-walled boats is also the ability to easily mount additional equipment t.j. additional cleat, anchor roller, rod holder, echo holder, etc.

There are also single-jacket boats on the market whose weight is much lower than ours. They weigh about 20-30% less. I would like to clearly warn against such constructions, because they are weak boats and the laminate in them is thin. Such structures will crack and crack during use. Of course, the manufacturers of such units claim that this is an asset of their boat, but please do not be fooled by such talk. We can also make lighter boats, but we are proud that our boats serve our customers with satisfaction for many years. Please also pay attention to the finish of the center of the boat. It is not without reason that manufacturers of cheap boats take little detailed photos. Usually half of the photos are photos of the hull, and the center is photographed from a distance. This is done for a simple reason, they just look terrible on the inside. Cheap single-jacket boats are usually not sanded inside, which makes large irregularities and sharp edges of the laminate visible. Such a laminated boat is dangerous because the laminate after drying is very sharp and can be injured if it is not properly processed. This process makes the boats smooth inside and can be safely used together with children.

The next issue is the use of finishing elements:

Imagine that these pseudo manufacturers can mount plastic dulki to a boat measuring 3 or 4 meters, it does not fit in your head!! . Dulls mounted directly to the flange in a single-jacket boat after one season are made and move. Needless to say, our solution is almost forever:)

The rubber fender profile around the boat at the competition is thinner and most often it is simply put on hot and nothing more. This solution causes the profile to fall, and on a sunny day when the fender heats up, it already behaves like a tape at all.

TRANSPORT OPTIONS:

Departures are organized after collecting several boats. During the season, trips are organized every 2-4 weeks.

This allows you to advertise goods that are not as described or defective.

At pseudo-producers you will not receive ANYTHING, any document, and in case of a defect or any problem you are left alone.

The stability of the boat is satisfactory, in the boat you can stand and spin calmly.

The boat is made of polyester-glass composite

Boat data:

Length - 310CM

Width - 130CM

The height of the boat from stern to bow - 40-50CM

Weight - approx. 60 kg

Displacement approx. 300kg

Maximum engine power - 5 HP, foot length S

The Lobster 310 boats come in a variety of equipment and colors.

1 flap type storage on the stern

3 buoyancy chambers

1 seat made of thick waterproof plywood covered with anti-slip

Riveted Bumper Strip

3 cleats made of hardened plastic

2 stainless steel clamps

engine reinforcement up to 5 hp

mooring ear on the bow

hull colour outside : white or grey

Hull Color Inside: Grey

There are many things you can do in the boat. As a manufacturer, we have the opportunity to retrofit the boat according to what the customer wants.

The most common equipment is:

oars

boat trailers

additional bow storage

seat back

swivel chair

stainless steel rails

stainless steel rod holder

sun visor

cabelaring - rope around the boat

tarpaulin for boats

flattening of the floor

transport wheels , mounted on the transom

additional ears ,knagi , rollers

Finally, referring to the boats from pseudo-producers, which are not lacking on allegro. They often produce boats without any technical knowledge. I saw structures without buoyancy chambers (only pasted wooden benches into the hull). They have deep respect for the safety of people sailing on such boats. It is hard to call their products boats or their manufacturers. I'd rather call them boat holes. They produce from materials of unknown origin using waste mats and fabrics from other companies purchased for pennies. They often do not issue invoices thanks to which you will document that the boat you bought is actually yours. Of course, there will be a group of people for whom several hundred zlotys difference will be more important than the quality of the product they will use and struggle with. As they say with glass, the ass also goes to wipe:)) And that's it for the end. Greetings Zybi

Specifications

Group Name Value
Parametry Condition new
Parametry Invoice With VAT invoice
Parametry Brand no brand
Parametry Kind rowing
Parametry Manufacturer code LOB310
Parametry Model LOBSTER 310
Parametry Number of people 3
Parametry Engine installation possible yes
Parametry Material laminate
Parametry Buoyancy 350 kg
Parametry Color white
Parametry Paddle holders 2
Parametry Length 310 cm
Parametry Width 130 cm
Parametry Weight 60 kg
Parametry Packaging status original
Parametry Additional features compartment,seats

Lieferzeit in ganz Litauen: 5-10 Werktage
Lieferpreis an die angegebene Adresse: 3 Euro

Verwandte Produkte

Kürzlich angesehen