Vienfazis nešiojamas generatorius KS 6000iE S, 5500 W

Trumpai apie prekę

Prekė: Vienfazis nešiojamas generatorius KS 6000iE S, 5500 W. Kategorija: Elektros generatoriai.

• Gamintojas: Könner & Söhnen
• Modelis: KS 6000iE S
• Įtampa: 230 V

Generator set KS 6000iE S

Pure sine wave

Dual conversion of electricity provides a pure sine wave, which allows the use of generators for reliable operation of electronics, computers, electronic measuring devices, medical equipment, boilers, etc.

Reliable engines

The reliable Könner & Söhnen engine meets all European quality standards, including the modern EURO V environmental standard. The reliable K&S engine has an individual serial number that allows us to control the quality of production and service. The high-quality copper coil alternator and powerful drive motor ensure trouble-free and long-lasting use. It is recommended to use devices sensitive to energy consumption (boilers, medical equipment, audio equipment, etc. ).

Economic mode

The fuel-saving mode switch reduces fuel consumption by up to 50% at low loads by reducing engine speed.

Ability to connect ats

The generator has an ATS output for connecting the ATS unit (Automatic Power Switch). The ATS unit automatically starts the generator and switches the load to it when the main power supply is disconnected. The ATS output is equipped with an 8-pin connector for connecting the ATS KS ATS 4/25 Gasoline unit.

Alternator with 100% copper winding

The Könner & Söhnen inverter generators are fitted with a reliable brushless alternator with 100% copper winding. The high-quality and compact permanent magnet alternator is housed in a plastic housing and can withstand maximum loads without any damage, ensuring long-term reliable operation of the generator set.

Ergonomic control panel

Convenient location of all functions: multifunctional LED display (operating hours counter,voltage, frequency), indicators of monitoring the state of the generator set show the current state of operation,automatic shutdown of the fuse in case of overload or short circuit,low oil level, Reset button to restart the control system and resume power supply,connector for parallel connection of generators, two USB outputs (5V/1A,5V/2.1A), 230V socket and ground clamp.

Parallel connection

Possibility of parallel connection of two generators to increase the output power and the possibility of connecting devices with higher power. With the included cable, you can connect two inverter generators together and get an output power equal to the sum of the rated powers of these models.

Low noise

The noise-resistant housing ensures a minimum noise level (70 dB Lpa 7 m), comfortable use and convenient transport, equipped with supports.

Multifunctional 6-in-1 led display

Control of all key operating status indicators: overload protection, automatic stop at low oil level, 6-in-1 multifunctional LED display displays: load, fuel level, frequency, voltage, motor hours counter; oil level indicator, overload indicator, operating indicator.

Transport kit

The Könner & Söhnen inverter generators are equipped with a transport system for easy movement. Two wheels and a raised handle when moving the generator ensure convenient transport and mobility of the device.

Specification

• Voltage, V 230
• Maximum power, kW 5.5
• Nominal power, kW 5.0
• Power factor, cos φ 1
• Frequency, Hz 50
• Current (max), A 23.9
• Sockets 1 x Schuko 230 V, 1 x CEE 230 V 32 A
• Trigger Type Manual/Electric
• Fuel tank capacity, l 14.5
• Operating time at 50% load, 7 hours
• LED display Load, fuel level, frequency, voltage, operating hours counter; oil level indicator, overload indicator, operating indicator
• Noise level Lpa/Lion, dB 70/97
• Outlet 12V, A 12V/8.3A
• USB-socket USB QC3.0 + Type C
• Engine model KS 240i
• Engine capacity, cm3 223
• Type of petrol engine 1-cylinder, 4-stroke, air-cooled
• Engine power, KM 7.5
• Possibility of parallel connection of generators +
• ATS input +
• Oil tank capacity, l 0.65
• Type of copper winding
• Degree of protection IP23M
• Completeness Generator, Packaging, Manual, Candle Wrench, Screwdriver PH2 6,0 mm, Accessory Cover
• Net dimensions (LxWxH), mm 640×450×570
• Gross dimensions (LxWxH), mm 715x525x640
• Net weight, kg 43
• Gross weight, kg 43.4

Specifications