Vandens filtras IBO 3x10-1

Trumpai apie prekę

Prekė: Vandens filtras IBO 3x10-1. Kategorija: Vandens filtrai ir minkštikliai.

• Gamintojas: IBO
• Modelis: 003482
• Talpa: 1 l

Description

Triple filter housing with three cartridges. With three cartridges, filtration consists of three stages. Filters are designed for water purification and treatment in apartments and small houses. They are made of durable materials like reinforced polypropylene, guaranteeing trouble-free operation for many years. The filter is characterized by high quality filtration. It reduces dirt, sediment, silt, rust and corrosion and absorbs chemicals, improving water properties such as taste, smell, color. The transparent housing also allows for visual control. In-line filters are a simple and effective solution. Their exchange is very easy.

Due to the available dimensions, the enclosures are compatible with most standard cartridges. The contributions that can be applied to our enclosures are:

• Mechanical inserts: foam and string,
• Reusable mechanical cartridges: mesh,
• active cartridges: carbon block, carbon granules, softening and ceramic.

ADVANTAGES

• Housing made of reinforced polypropylene,
• Two o-rings for tightness,
• Transparent housing for visual assessment of contamination,
• Max. pressure 6 bar,
• Temperature range 2-30°C.

To ensure proper operation of the filter and to avoid damage, the following conditions must be met:

• Operating pressure in the system: 0,2 – 0,6 MPa (2 – 6 bar).
• Water hardness: Recommended value below 500 mg CaCO₃/l.
• Iron and manganese content: Maximum 0,2 mg/l iron and 0,05 mg/l manganese.
• PH of water: from 5,5 to 9.
• Filtered water temperature: +2°C to +30°C.
• Water must not contain large amounts of mechanical deposits, sand or silt – in this case a pre-filter is required.

Installation of the body

The body should be installed in the cold water network. When connecting, observe the direction - water supply to the body.

• Cut off the water supply in the pipeline before starting the installation.
• After installing the body, carefully open the water supply and make sure all connections are tight. In case of water leakage, tighten the locking ring with a special key.
• The air initially in the body of the product after installation can be released by unscrewing the appropriate screw on the lid.

Specifications