Suvirinimo inverteris MAGNUM MIG 212 ALU CU SYNERGY 230V 200A 2T/4T

Trumpai apie prekę

Prekė: Suvirinimo inverteris MAGNUM MIG 212 ALU CU SYNERGY 230V 200A 2T/4T. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U MI 212AL CU

➡ COMPACT, SYNERGISTIC SEMI-AUTOMATIC WELDING MACHINE ⬅

MAGNUM MIG 212 ALU CU WELDING MACHINE

it is a professional, technologically advanced semi-automatic welding machine designed for welding using the following methods:

➡ MIG/MAG:

Arc welding in gas shields (CO2 or Argon+CO2) is one of the most commonly used processes for the production of welded structures. The semi-automatic welding process involves melting the edges of the welded object and the welding material (welding wire on a roll) with an electric arc produced between the welding wire fed by the handle and the welded material.

Available Modes:

• MIG SYN - MIG/MAG welding with synergistic settings,
• MIG MAN - MIG-MAG welding in manual (traditional) mode,
• FLUX / FCAW - self-shielding wire welding. This is a similar welding process as MIG/MAG but does not require a gas cylinder. On the wire there is a thin layer of powder, which at the time of arc formation produces gas covering the working area.

➡ TIG LIFT DC - welding with a non-melting electrode (tungsten) in an inert gas shield (Argon) using an additional handle. In the TIG DC Lift mode, the arc glow occurs when the electrode with the welded element is contacted (the button in the handle does not arc, the gas is connected directly from the reducer to the handle). In TIG Lift DC mode, the current is constant.

➡ MMA - classic welding with wrapped electrodes (rutile, alkaline, acidic).

The MIG 212 ALU CU welder is used for welding:

✔ low alloy steels (MMA, MIG/MAG, TIG Lift DC),

✔ low carbon steel (MMA, MIG/MAG, TIG Lift DC),

✔ alloy steels (MMA, MIG/MAG, TIG Lift DC),

✔ acid-resistant steels (MMA, MIG/MAG, TIG Lift DC),

✔ aluminium and its alloys (MIG),

✔ other weldable metals and alloys.

The device has been designed for all kinds of welding work in automotive, locksmith, repair, industrial workshops etc.

MAGNUM MIG 212 ALU CU has a readable and easy to use function panel, which has m.in.:

5. Welding method selection button: SYN, MAN, TIG Lift, MMA

6. Gas material selection and shield button, for MIG-MAG welding with synergistic settings.

7. The button for selecting the available wire diameter, when welding MIG-MAG with synergistic settings.

8. Knob and button in one.

9. Knob and button in one.

10. Additional functions selection button for MIG-MAG and MMA.

The device is equipped with appropriate synergistic programs for welding various materials m.in.:

• Fe CO2 - Welding of carbon steels, non-alloy steels.
• Fe Ar+CO2 - Welding of carbon steels, non-alloy steels.
• SS Ar - Welding of alloy steels, stainless steels.
• Flux - Self-shielded wire welding.
• Al Ar - Welding of aluminium alloys.
• CuSi Ar - Copper welding and soldering.

DIAMETERS OF WELDING WIRES:

• Φ 0,6 mm
• Φ 0,8 mm
• Φ 1.0 mm
• Φ 1.2 mm

• ✔ REPAIR WORKSHOPS,
• ✔ AUTOMOTIVE INDUSTRY,
• ✔ LOCKSMITH WORKSHOPS,
• ✔ ALL BODYWORK REPAIRS,
• ✔ FARMS,
• ✔ HOMEWORK,

AND WHEREVER RELIABILITY MATTERS!

✔ SYNERGY - is a very helpful feature available in professional welding equipment class PREMIUM. By setting the appropriate program or entering parameters, the device will independently select most welding settings, such as wire feed speed or appropriate voltage, according to the programmed data.

✔ MANUAL MODE - the ability to manually set the welding machine and make adjustments to synergistic settings (most synergistic welding machines currently available on the Polish market do not have a fully manual mode, and thus it is not possible to manually set the m.in wire feed speed, which is not always in synergy tailored to our needs).

✔ INDUCTANCE ADJUSTMENT - function is useful during welding using the MIG/MAG method of thin elements, preventing them from burning out and soldering galvanized elements. Changing the inductance value also reduces the amount of welding chips during CO2 shielded welding. Thanks to the inductance adjustment, the welding machine is suitable for lutowelding. Depending on the model of the welding machine, the adjustment is automatic or can be adjusted manually.

✔ SOLDERING - is a method that resembles MIG/MAG welding to a fairly large extent, but the energy supplied in this case is much less. This means that soldering is used to join thin sheets covered with a layer of zinc. The described method is a bonding process during which solder melts, not the material with which we work.

✔ HOT START - facilitates the ignition of the electrode by providing more welding current with each arc.

✔ ARC FORCE - is a function that facilitates the transfer of a drop of molten electrode to the welded material, preventing the arc from extinguishing when the drop of electrode contacts the welding lake.

✔ VRD - is a voltage reduction system whose task is to turn off the power supply within a few milliseconds after welding. This function is also responsible for reducing the voltage on the wrapped electrode to a safe level.

✔ ANTI STICK - anti-short-circuit function - reduces the welding current to a minimum value when the welder makes a mistake and the electrode is glued to the welded material. This makes it easier to detach the electrode from the welded material and protects the electrode holder from damage.

✔ INVERTER TECHNOLOGY IGBT - is a modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has the effect of significantly extending the reliable operation of welding equipment.

✔ EUROCONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

✔ TWO-BAR 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow.

✔ FOUR-BAR 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow.

✔ CONTROL PANEL - The welding machine is equipped with an easy-to-use control panel and display, so it can be used even by amateurs.

✔ MOBILITY OF THE DEVICE - thanks to the attached transport handle, the welding machine is easy to transport and allows welding in hard-to-reach places.

✔ EASY TO USE - The welding machine is equipped with an easy-to-use control panel, so it can be used even by amateurs.

EFFICIENT OPERATION THANKS TO PROFESSIONAL WIRE FEEDER

The welder is equipped with a solid wire feeder, which guarantees stability and continuity of operation of the device.

The 2-roller feeder enables precise extension of the welding wire excluding its slippage.

The feeder has a quick wire change knob as well as a wire feed roller.

✔ There are polarity selection slots in the feeder compartment. Red - PLUS, black - MINUS. By default, the polarity on the Euro-Slot is set to PLUS. In the case of self-shielding wire welding, the polarity should be converted to Euro-socket to MINUS by overvoltage of the cable in the feeder chamber from the red to black socket.

➡ The device is equipped with overload protection, which increases its reliability.

❄ The device has a fan cooling system which significantly increases its efficiency.

⏩ TECHNICAL DATA:

• Power supply network protection: 20A
• Power supply: AC 230 [V], 50 [Hz]
• Idle voltage: 60 [V] / 15 [V] with VRD
• Efficiency: 60%

⏩ MIG AND MMA PARAMETERS:

• MIG/MAG welding current: 40 - 200 A
• MMA welding current: 30 - 160 A
• MIG/MAG welding voltage: 16 - 24 V
• Wire spool size: 0,45 - 5 kg
• Wire feeder: 2-roll
• Wire diameter: 0,6/0,8/0,9/1,0/1,2 mm

⏩ OTHER:

• Degree of protection: IP21
• Weight of the device : 10 kg

WHEN YOU BUY FROM US, YOU GET:

• Welder MAGNUM MIG 212 ALU CU - 1 pc.
• welding cable MIG MB15 - 3m - 1 pc.
• MMA electrode cable - 2m - 1 pc.
• mass cable - 2m - 1 pc.
• Gas hose - 2,5m - 1 pc.
• Ties for hose - 2 pcs.
• Instruction for using in Polish
• Guarantee card

SET OF 1 MIG INDUCTANCE MB15.

M.

Specifications