Suvirinimo inverteris iTECH TIG 220 AC/DC HF SYNERGY ALUMINIUM SKANDI KRAFT

Trumpai apie prekę

Prekė: Suvirinimo inverteris iTECH TIG 220 AC/DC HF SYNERGY ALUMINIUM SKANDI KRAFT. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: SKANDI KRAFT
• Modelis: iTECH TIG 220 ACDC
• Ilgis: 480 mm
• Plotis: 210 mm
• Aukštis: 380 mm

POWER SUPPLY PARAMETERS

• Power supply: 230 V
• Frequency: 50/60 Hz
• Idle voltage: 65 V
• Network security: 20 A

TECHNICAL PARAMETERS

• TIG welding current: 10-200 A
• TIG welding voltage: 10.4-18 V

Efficiency (for temp. 40°C):

• 40%/ 200 A / 18 V
• 60%/ 163 A /16.5 V
• 100%/ 126 A / 15 V

• MMA welding current: 30-200 A
• MMA welding voltage: 21.2-28 V

TIG efficiency (for temp. 40°C):

• 40%/ 200 A / 28 V
• 60%/ 163 A / 26.5 V
• 100%/ 126 A / 25 V

TIG AC/DC PARAMETERS

• PRE GAS: 0-10 [s]
• START AMP welding start current: 10-200 [A]
• UP SLOPE current build-up time: 0-15 [s]
• PEAK AMP peak current: 10-200 [A]
• pulse cycle: 5-95 [%]
• pulse frequency: 1-200 [Hz]
• Pulse balance: 10-90 [%]
• base current: 10-190 [A]
• DOWN SLOPE descent time: 0-25 [s]
• final current: 10-200 [A]
• gas outflow after POST GAS process: 1-10 [s]
• AC current frequency: 40-200 [Hz]
• AC current balance: 10-90 [%]

PHYSICAL PARAMETERS

• Length x width x height: 48 × 21 × 38 [cm]
• Weight: welding machine [net] 14.8 kg, in carton [gross] 21kg
• Housing Protection Degree: IP21S
• Cooling: fan

ADDITIONAL FUNCTIONS

• PULSE possibility of full parameter adjustment: yes
• FAN STOP turning off the fan at rest: yes
• 2T/4T allows for more comfortable creation of longer welds: yes
• VRD voltage reduction and safety improvement in MMA : yes
• Arc Force welding arc length adjustment: yes
• Hot Start quick arc glow: yes
• Anti Stick prevents electrode sticking: yes
• Connector for quick connection of gas hose (TYPE 21): yes
• Memory Channels: 18

Advanced model of the iTECH TIG 220 AC/DC with the option of an innovative TIG AUTO system – after specifying the type and thickness of the material, it sets the appropriate welding parameters and ensures readiness for operation. Thanks to the software, the AUTO system will independently select the parameters for novice users of the TIG welding method who are just starting their adventure with this method. It is a device for all demanding users looking for perfection in welding. It has a 3.5” LCD display, allowing intuitive and easy operation in 4 languages. It enables welding using HF-TIG, LIFT-TIG and MMA methods. The small size, weight of 14.8 [kg] and transport handle make it mobile and convenient to use. It offers a comfortable, quiet operating mode (FAN STOP) with limited power consumption.

iTECH TIG 220 AC/DC is equipped with an innovative air flow system through the NorthernWind (NW) cooling chamber, which significantly increases the service life, durability and cycle of components.

iTECH TIG 220 AC/DC is ideal for welding materials from 0.1 [mm] to 6 [mm]:

• in workshop works (air conditioning pipes, oil pan, exhaust manifolds),
• in the company (aluminum structures, radiators/intercoolers, wheel repair),
• light industry (sanitary installations, aluminium trusses, HSS steel welding).

Advanced model of the iTECH TIG 220 AC/DC with the option of an innovative TIG AUTO system – after specifying the type and thickness of the material, it sets the appropriate welding parameters and ensures readiness for operation. Thanks to the software, the AUTO system will independently select the parameters for novice users of the TIG welding method who are just starting their adventure with this method. It is a device for all demanding users looking for perfection in welding. It has a 3.5” LCD display, allowing intuitive and easy operation in 4 languages. It enables welding using HF-TIG, LIFT-TIG and MMA methods. The small size, weight of 14.8 [kg] and transport handle make it mobile and convenient to use. It offers a comfortable, quiet operating mode (FAN STOP) with limited power consumption.

The TECH TIG 220 AC/DC is equipped with an innovative air flow system through the NorthernWind (NW) cooling chamber, which significantly increases the service life, durability and cycle of components.

The device primarily provides intuitive operation and advanced functionality, which allows for individual adjustment of settings in the HF-TIG, LIFT-TIG methods. Choose from DC welding mode (black steel, SS stainless steel, titanium) or AC (aluminium and its alloys). Possibility of welding with PULSE with full adjustment: frequency, cycle, current in DC and additionally balance and frequency in AC. Choosing 6 AC waveforms will improve the precision of the work performed. TIG is equipped with the proprietary AC AUTO mode, which after setting the parameters will automatically adjust the frequency and pulse balance in AC. It has options for working in 2T and 4T. The device has also been enriched with the SPOT function, which is particularly useful in tabbed joining of thin sheets and pre-vaccination before butt welding.

4 meters, which allows you to control the welding machine from the handle. The burner has a flexible body (Flex), terminated with a laminar lens (included: 1.6, 2.0, 2.4 [mm]). iTECH TIG 220 AC/DC is ideal for welding materials from 0.1 [mm] to 6 [mm]:

• in workshop works (air conditioning pipes, oil pan, exhaust manifolds),
• in the company (aluminum structures, radiators/intercoolers, wheel repair),
• light industry (sanitary installations, aluminium trusses, HSS steel welding).

Basic information about SKANDI KRAFT iTECH TIG 220 AC/DC

• TIG AC/DC AUTO system – after specifying the type and thickness of the material, it allows for automatic adjustment of welding parameters in the HF-TIG method.
• Welding by 3 methods: TIG AC/DC (TIG AC/DC AUTO), TIG (AC/DC)

HF and LIFT-TIG, MMA with hot melt electrode.

• PULSE welding, thanks to this function, the welding machine has the ability to fully adjust the parameters, it is possible to change the focus of the arc and the shape of the weld.
• It has the ability to choose 6 AC wave shapes (rectangular, sinusoidal, triangular, front triangular wave, rear triangular wave, trapezoidal).

  Rectangular – loud and efficient in the welding process of thick aluminum alloy elements.

Sinusoidal – gentle and ensuring smooth arc guidance for both thick and thin materials.

Triangular – suitable for welding thin materials due to the short base current time.

Front/Rear Triangular Wave – an original option that allows you to use the triangular wave in a larger range.

Trapezoidal – hybrid wave, a combination of sine wave and rectangular wave.

• TIG handle with potentiometer to adjust parameters from the handle level, body type (FLEX) for comfort in every plane and laminar lenses that reduce gas consumption and improve weld quality.
• Welding machine with easy-to-read 3.5” LCD display, four languages to choose from and 18 memory channels with the ability to save settings.
• The FAN STOP system turns off the fan at idle – so that the welding machine with power on and full functionality does not emit noise, reduces power consumption and does not draw dust. The fan automatically turns on when we start welding.
• The LIFT-TIG function equipped with the SOFT START module reduces the risk of damage to the electrode when starting the welding process. For welding in demanding conditions (without HF ionizer).
• It is built with IGBT transistors, which are characterized by high efficiency.
• 2T welding in this mode triggers the gas outflow before the process after pressing the arc glow button, then the device will start welding on the set base current. Release of the button will cause the welding arc to fade out and gas to flow out after the process.
• 4T, welding in this mode triggers the gas outflow before the process when you press the arc glow button. After releasing the button, the device will start to build up parameters to the upper current. Pressing the button again will cause the current to drop, extinguish the crater and apply gas outflow after the process.

• Mobile and versatile with transport handle. Welding machine for professional and garage use.

FUNCTIONS OF THE DEVICE

Welding TIG AUTO system:

• Automatic setting of the welding machine after specifying the type of material and thickness, the device will adjust the welding parameters. This system has the ability to fine-tune the manual welding current in order to individually select parameters.

AC or DC operating mode is set automatically depending on the type of material.

TIG AC/DC (HF/LIFT) method:

• Selection of AC and DC

  AC welding mode – AC welding mode, for welding aluminum alloys.

  DC – DC welding mode, for welding black steel, stainless steel (chromo-nickel) and other materials.

• PULSE thanks to this function, the welding machine has the ability to fully adjust the parameters, it is possible to change the focus of the arc and the shape of the weld.
• Selection of 6 shapes of AC wave (rectangular, sinusoidal, triangular, front triangular wave, rear triangular wave, trapezoidal).
• Choosing 2T/4T, which allows you to create longer welds more comfortably.
• BI LEVEL - a function that allows smooth switching between two welding current values. Activated by a quick press of a button on the handle, it allows you to change the current without interrupting operation. It is particularly useful when welding continuous welds on materials of different thicknesses, as well as in situations requiring regulation of welding current, for example, when welding aluminum for better temperature control.

Has adjustable parameters for TIG AC/DC welding:

• gas outflow before ignition [s],
• welding start current in [A],
• time of electricity build-up [s],
• peak current (welding current) [A] A,
• pulse cycle[%],
• pulse frequency [Hz],
• base current (only in AC mode),
• current drop time [s] second,
• final current/crater extinguishing [A],
• gas outflow after the process [s] second,
• AC pulse balance [%],
• AC pulse cycle [Hz]

Welding MMA:

• Hot Start – facilitates the start of welding by temporarily increasing the welding current at its beginning.
• Arc Force — adjustment of the length of the welding arc, this function allows you to reduce or increase the depth of melting and reduce the amount of chipping.
• VRD – allows you to detach the arc when the electrode is detached from the material and ensure work safety during welding.
• Anti Stick — easier detachment of the electrode if it is glued.

DELIVERY CONTAINS

• SKANDI KRAFT iTECH TIG 220 AC/DC welder with integrated power cable with a length of 3 meters and a cross-section of 3×2,5[mm2]
• TIG SR26 Flex welding torch 4 meters with the possibility of controlling from the handle
• Mass holder fully copper 3 meters, cross section 25 [mm2]
• Copper electrode holder 3 meters, cross section 25 [mm2]
• 3 laminar gas lenses (1.6; 2.0; 2.4 [mm])
• 3 gold tungsten electrodes with diameter (1.6; 2.0; 2.4 [mm])
• 3 stoppers for the handle (long, medium, short)
• 3 x terminal bushing (1.6;2.0;2.4 [mm])
• 1 x Lens Insulator
• 3 x "8" ceramic nozzle
• Gas cylinder mounting elements: 2 x gas reducer mounting band, gas hose 2. meters, key
• Instructions.

Specifications