Suvirinimo inverteris IGBT MIG MAG FLUX MMA 200A 2x viela

Trumpai apie prekę

Prekė: Suvirinimo inverteris IGBT MIG MAG FLUX MMA 200A 2x viela. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Majster Polska
• Modelis: MP-0108
• Ilgis: 310 mm
• Plotis: 150 mm
• Aukštis: 260 mm

MIG ⭐ MMA ⭐ FLUX ⭐ TIG-LIFT

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

Every even the simplest INVERTER is incomparably BETTER than even the most expensive outdated transformer

Here we are dealing with a proven device, improved for years, we invite you to read customer reviews about the product

MAJSTER is a Poland company that constantly makes sure that the products are:

Refined, Failure-free, at work Convenient, in price-quality Unbeatable

Here is the most popular inverter MIG and model MP-0106. ⭐ MIG Flux ⭐ MMA ⭐ TIG-LIFT

Device with Full set XXL, 2x wire self-shielding, Mask, handle mb15 eu,

✅ MP-0106 to proven equipment ⭐ highest in class EFFICIENCY of the inverter ⭐ simple proven solutions 100% trouble-free ⭐

MAJSTER does not assemble unnecessary electronic gadgets or a large enclosure so that the equipment is large only by eye and the price is raised by gadgets

✅MAJSTER the main attention applies to the HEART or inverter and its efficiency⭐

✅ This is supposed to be ⭐ SIMPLE⭐ POWERFUL ⭐WITHOUT EMERGENCY⭐ operating in all conditions⭐ equipment

• - Bulk cable ⭐
• - Electrode cable ⭐
• - Integrated MIG ⭐ handle
• - Hand mask ⭐
• - Brush with hammer ⭐

The FCAW method is arc welding with core (powder) wire.

It is a welding method similar to the MIG/MAG method, except that the wire inside is filled with flux or a chemical that produces protective gases during welding.

FCAW welding combines the advantages of both wrapped electrode welding and MAG welding: very high efficiency (no need to change the electrode frequently) can also be welded outdoors (the flux also protects against weld oxidation) the welder does not have to have very high qualifications.

It is designed for all kinds of welding work, in locksmith workshops, repair workshops, bodywork, farm, etc.

The power source was built on IGBT transistors providing a minimum of electromagnetic interference, small power losses in basic systems, enabling increase in efficiency and reliability of the power source, lower consumption

✅ SPECIFICATION:

• Model: MP-0106
• Supply voltage: 230V
• Frequency: 50Hz
• Rated Input Capacity: 3,7KVA
• Welding methods: FLUX - semi-automatic welding with self-shielding wire "without gas"
• Electrode range: 1,6-4 mm
• Wire diameter: 0.8 - 1,0 mm
• Wire spool weight: max 1kg
• Rated welding cycle: 60%
• Working cycle: 25%
• Efficiency: 85%
• Degree of protection: IP21S
• MIG welding current: 40-200A
• MMA welding current: 20-200A
• Degree of protection: H
• Weight: 5,6kg

✅ COMPOSITION OF THE SET:

• MP-0106 welder
• Hand mask
• Brush with hammer
• Bulk cable
• Electrode cable
• Integrated MIG handle
• Self-shielding wire 0.8mm 0.45kg - 2 pieces
• User manual in Polish,
• Original packaging

Popularly called hot start, it allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arc ignition and is designed to prevent the electrode from sticking to the material. It is a great facilitation when lighting the electrode.

cuts/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK allows the welder to detach the electrode more easily.

stabilizes the arch regardless of its length. Regulates the dynamics of the welding arc. By reducing the value of the function, it gives a soft arc and a smaller depth of melting, while increasing the value of the function causes deeper melting and the possibility of short arc welding. With the highest value for ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through.

Specifications