Suvirinimo aparatas WELDMAN MIDI MIG 222 SYNERGY, 220A, MMA/TIG/MIG

Trumpai apie prekę

Prekė: Suvirinimo aparatas WELDMAN MIDI MIG 222 SYNERGY, 220A, MMA/TIG/MIG. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Weldman
• Modelis: 103 109 MAPR2-15-N
• Ilgis: 470 mm
• Plotis: 225 mm
• Aukštis: 335 mm

Brand: WELDMAN | Welding methods: MIG/MAG, MMA, TIG LIFT | Power supply: 230V | Welding current: 220A | Efficiency: 60%

TECHNICAL PARAMETERS

• Supply voltage [V] 230
• Idle current voltage [V] 56
• Welding current adjustment range [A] MIG 40-220
• TIG 10-220
• MMA 20-220
• Efficiency max at 40°C 220A@60% 170@100%
• Wire diameter [mm] 0,6-1,0
• Max spool weight [kg] 5
• Protection class [IP] IP21
• Dimensions [cm] 52x22x40
• Weight [kg] 13

These MIDI MIG 222 SYN series devices (from now on called the welding machine) were made based on IGBT inverter technology. The device uses general protections such as protection against excessive voltage, excessive current, overheating of the device, etc.

• MIG/MAG (with CO2 protective gas shield)
• MIX (with CO2/Argon protective gas shield)
• FLUX (without gas shield)
• MMA (DC electrode welding)
• TIG DC LIFT (contact arc glow)

and is designed for carbon steel, stainless steel, alloy steel, cast iron and aluminum.

The welding machine is equipped with an intuitive, easy-to-use control panel, which has an LCD display and switches responsible for control. In addition, this device also has a eurodisconnector and a detachable mass cable and can operate in 2-bar / 4-bar mode.

The built-in synergic system allows less experienced users to choose welding parameters.

The semi-automatic welding machine is designed for both semi-professional and professional users.

PRODUCT FEATURES

• IGBT TECHNOLOGY: Modern technology based on insulated-gate bipolar transistors. It combines the ease of control of field-effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment.
• PROTECTION DEGREE: IP indicates the degree to which a device is protected against the ingress of solid foreign objects and water. IP21 means the device is suitable for use in indoor environments.
• OVERHEATING PROTECTION: The IGBT module is protected against overheating by a protective system that shuts down the welding circuit. After a few minutes, the welder cools down to a temperature that allows it to automatically restart.

• The work cycle is based on a 10-minute period. The 60% duty cycle means that a 4-minute break is required after 6 minutes of operation of the device. The 100% duty cycle means that the device can work continuously, without interruptions.
• MMA The method by which the wrapped electrode is used, consisting of a metal core covered with a sheath. The device allows welding with all types of electrodes, e.g. alkaline, cellulose, rutile or acidic.
• CHANGE OF POLARITY - WELDING WITHOUT GAS Thanks to the variable polarity, it is possible to weld using the FLUX method with powder wire without shielding gas. The wire is filled with flux producing protective gases during welding.
• MIG/MAG Arc welding in gas shields is one of the most commonly used processes for the manufacture of welded structures.
• SYNERGY MIG/MAG welding using synergistic settings. The device selects welding parameters depending on the selected type and thickness of the material.
• These parameters can be changed by the user to adjust the settings to suit their needs. Many programs have been prepared for synergistic welding, including the lutowelding program.

• Easy to use control panel allows precise and smooth adjustment of parameters. Digital display indicates the actual current during welding. The semi-automatic welding machine has a menu that facilitates operation and allows you to choose the type of welded material.
• WELDING BY TIG LIFT METHOD For welding by this method, it is necessary to use an additional TIG handle. A gas-cooled handle with current load capacity suitable for the device is required, equipped with a shield gas control valve.
• ISOLATION CLASS F Type of insulation materials used, informing about the maximum operating temperature of the transformer. Its exceeding at continuous operation reduces the service life and time of trouble-free operation of the transformer. For class F 155°C.
• SMOOTH ADJUSTMENT OF WIRE FEED is supported by an additional potentiometer allowing you to set the speed for different wire diameters.
• COOLING The device has a cooling system with a fan which significantly increases its efficiency.

The semi-automatic welding machine offered in the set has high-quality accessories, such as:

- gas cylinder 8 liters - Ar+CO2 (mixture) - 8L cylinder filled with argon mixture (82 %) carbon dioxide (18 %) intended for use in welding and industry. The cylinders have 10 years of legalization and meet EN-1964-1 standards and have the Π mark, which allows them to be used in all EU countries. The robust valve cover protects the valve during transport and storage additionally facilitates the transport of the cylinder. Powder coating of cylinders in accordance with PN-EN standards. The small dimensions of the cylinder (height with cap – 76cm, diameter 14cm), make the cylinder well suited for field work. Most reducers available on the market fit into the cylinder.

- welding wire 0,8/5kg - high quality copper welding wire ER70S-6 with a diameter of 0.8mm and a spool weight of 5kg. Made of high-quality steel. Designed for MIG/MAG welding. The wire features a stable electric arc, good stitch appearance and very small splashes. Wrapped on a D200 size plastic spool which is standard fit for most welding machines

- CO2/Ar reducer with 2 pressure gauges - one-stage with two pressure gauges, designed for Argon and CO2 gases. With the help of a reducer, you can smoothly adjust (lower) the working pressure and flow of gas flowing from the cylinder.

- long welding gloves - protective gloves made entirely of cowhide leather

- magnetic angles 2pcs - which will allow precise and durable positioning of the material at an angle of 45, 90 or 135 degrees. It is an indispensable helper during welding or soldering, and at the same time it is cheap and reliable. The product is built of strong, high durability magnets additionally covered with a very resistant plastic shell, in a solid steel housing. It is an invaluable help in welding, assembly of metal elements, soldering, routing

- set of 13 parts for MIG MB 15 handle - set of spare parts for MIG 15 handle will be used when individual elements wear out or the diameter of the welding wire changes. To ensure the highest possible comfort of work, it is necessary to correctly choose the diameter of the current tip to the diameter of the wire that we intend to work. The offered set of spare parts contains the elements that wear out most often, and thus it is worth stocking up on their stock

- spray anti-spatter ANTI-SPAW - spray in the form of an aerosol is an odorless agent used to protect the nozzle of the burner, tools and the surface of the welded material from melting metal chips during welding with electrical techniques. CONTENTS: 400ml

DELIVERY CONTAINS

• semi-automatic welding machine
• welding torch MB 15 AK 3m
• TIG WP-26V welding torch with 4m valve (DX50)
• 2 m mass cable with 300A mass clamp (DX50)
• cable 2,5 m with electrode holder 200A (DX50)
• 2 m power cord with 230V plug
• 230V power socket located on the rear panel
• gas connection (8 mm technical hose connector)
• welding mask
• welding brush

+ ACCESSORY

• gas cylinder 8 litres - Ar+CO2 (mixture)
• CO2/Ar reducer with 2 pressure gauges
• Welding wire 0,8/5kg
• magnetic angle 2pcs
• gas connection hose + 2 worm bands
• MIG handle repair kit (10x current tip, 2x gas nozzle, tip connector)
• long welding gloves
• rutile electrodes 2,5/350 - 1kg
• spray anti-spatter ANTISPAW

Specifications