Suvirinimo aparatas WELDER MAGNUM TIG THF 238 PRO-X AC/DC

Trumpai apie prekę

Prekė: Suvirinimo aparatas WELDER MAGNUM TIG THF 238 PRO-X AC/DC. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U I THF238PRO-X

The THF238 PRO-X AC/DC from MAGNUM is a professional, lightweight inverter welding machine designed for welding using the following methods:

➡ TIG AC/DC

Welding with a non-melting electrode in an inert gas shield with the possibility of advanced DC (DC) and alternating current (AC) welding.

⚡ TIG HF - method of non-contact high frequency arc ignition using an ionizer. The glow occurs by approaching the electrode to the welded material and pressing the button on the handle.

⚡ TIG Lift - touch method by touching the electrode of the welded material, and then lifting it to a height of several millimeters, which initiates the welding arc.

⚡ TIG PULS - pulsed welding

➡ MMA

welding with direct current electrode (DC) and alternating electrode (AC). MMA welding can be done after buying an electrode holder, because it is not included in the offered set.

THF 238 PRO-X provides excellent performance in welding:

✔ aluminium and its alloys,

✔ non-alloy steel,

✔ low alloy steel,

✔ high-alloy steel,

✔ titanium,

✔ other weldable metals and alloys.

The THF 238 PRO welder is powered from a single-phase 230V network, has a high 60% duty cycle at 200 A, which allows it to be used in various industrial segments. The device has an intuitive, easy-to-use control panel that allows for quick and precise selection of individual welding parameters.

The control panel is equipped with a multifunctional display illustrating the values of individual parameters, the adjustment of which is carried out with a single knob.

The welding machine is characterized by a wide range of applications, it is dedicated to all kinds of welding work in factories, industrial plants, locksmith workshops, repair workshops, etc.

Thanks to the regulation of pulse welding parameters TIG PULS we have an impact on the shape of the weld and the focus of the arc. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding thin materials.

Arching occurs in non-contact (HF) or touch mode (LIFT). The LIFT function is used during welding in environments with a high risk of electromagnetic interference affecting the environment.

Both with the MIG/MAG method and TIG HF non-contact and TIG LIFT touch ignition, we have the option of selecting the button function in the handle between operation in 2-bar or 4-bar mode (button lock for long welds).

➡ TIG DC and TIG DC PULS

is used for welding: steel stainless steel, carbon and low alloy steels, copper and titanium.

➡ TIG AC and TIG AC PULS

enables welding of aluminium and its alloys and brass.

By adjusting TIG PULS pulsed welding parameters, we have an impact on the shape of the weld and the focus of the arc. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding very thin components.

ADVANTAGES OF THE THF 238 PRO-X:

⭐ SPOT WELDING SPOT - with the possibility of setting the welding time at the point. A function that allows you to perform even, spot welds or spot welding of thin plates with other elements. This method is used, for example. in the production of chassis and car bodies, but also in the home workshop.

⭐ CHOICE OF AC WAVEFORM SHAPE: waveform adjustment allows for more precise impact on the weld (width, height, depth of melting)

• SQUARE - rectangular alternating current waveform allows welding of aluminum with the addition of magnesium
• SINUS - sinusoidal waveform is recommended for welding pure aluminum 99,999%

⭐ OPERATING MODE 2T/4T - regulation of balance, current frequency, pulse frequency, pulse width and pulse current

⭐ Bi-LEVEL - possibility of switching between two welding current values

✅ Made in INVERTER technology

✅ Easy to use even for amateurs

✅ Transistors IGBT

✅ Good value for money

✅ Intended to work in INDUSTRY

✅ LCD Display - Easy Operation

✅ Welding of STAINLESS STEEL

✅ Welding ALUMINIUM

✅ Automatic cooling system with fan

✅ Built-in overload protection

✅ Stepless adjustment of welding current

CONTROL PANEL

Digital function panel enables precise control of all the most important welding parameters for TIG AC/DC methods:

• Graph of the TIG process,
• Selection of waveform when welding TIG AC - sine wave, rectangular,
• Balance AC,
• AC current frequency,
• Bi-LEVEL - the ability to switch between two welding current values,
• The outflow of gas before welding,
• Starting current ,
• Time of electricity build-up,
• Current welding,
• Time of falling current,
• Current final (extinction),
• Gas flow after welding,
• TIG PULS: peak current, base current, pulse frequency, pulse width,
• Operating mode 2T/4T,
• TIG Lift contact arc ignition,
• TIG HF,
• TIG Point - spot welding.

THE WELDING MACHINE ALSO HAS A NUMBER OF FUNCTIONS FACILITATING MMA WELDING SUCH AS:

✅ HOT START: facilitates the ignition of the electrode by providing more welding current with each arc.

✅ ARC FORCE: facilitates the transfer of a drop of molten electrode to the welded material, preventing the arc from extinguishing when the drop of electrode contacts the welding lake.

The power source was built on the basis of IGBT (Insulated Gate Bipolar Transistor) transistors, which provide a minimum of electromagnetic interference, small power losses in basic systems, enabling increased efficiency and reliability of the power source. Very high efficiency, which translates directly into lower energy consumption, and high switching frequency, ensure rapid adjustment of the current to changes in parameters during welding.

Original recommended TIG handle Magnum SR26V with button for initiating arc glow, fits most welding equipment available on the market.

The handle has an ergonomic shape so it fits perfectly in the hand. The control button is located in the central place of the handle.

The handle of the burner has specially rubber inserts, thanks to which the handle lies securely in the hand. The handle has a high-quality rubber cover, protecting the wires from abrasion.

It is armed with the accessories described in the graphic and ready to work. The handle has a high-quality cover, protecting the wires from abrasion.

TIG handle may vary slightly from the picture shown depending on delivery.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

When using an ordinary gas nozzle, the shielding gas is first reflected from the inner walls of the ceramic nozzle and then is unevenly distributed to the working area. Using the gas lens , the gas through a special mesh is distributed evenly along the tungsten electrode straight to the working area providing a much better shield of the weld.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

✔ CAR REPAIR SHOPS

✔ LOCKSMITH WORKSHOP

✔ FACTORIES

✔ SHIPYARD

✔ FARMS

✔ HOMEWORK

AND WHEREVER RELIABILITY MATTERS!

☀ VERSATILITY OF THE DEVICE ☀

THF 238 PRO X from MAGNUM, is a device with a wide range of applications, designed as an inverter power source enabling welding by:

✔ MMA

In the MMA method, a wrapped electrode is used, consisting of a metal core covered with a sheath. An electric arc is produced between the end of the electrode and the welded material. Arching is created by touching the end of the electrode to the welded material.

NOTE FOR MMA WELDING SHOULD BE PURCHASED ADDITIONALLY ELECTRODE HOLDER, AVAILABLE AT OUR OTHER AUCTIONS!

✔ TIG

In the TIG (Tungsten Inert Gas) method, the electric arc is ignitioned in an inert gas (argon) shield between the welded element and the non-melting electrode, made of pure tungsten or tungsten with additives.

The welding arc in the TIG method is ignited by two methods:

• by touch method by touching (TIG Lift) the electrode of the welded material, and then lifting it to a height of several millimeters, which initiates the welding arc
• non-contact method (TIG HF) using an ionizer by approaching the electrode to the welded material.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

TO MEET CUSTOMERS, BASED ON OUR MANY YEARS OF EXPERIENCE, WE HAVE CREATED PROFESSIONAL SETS FOR YOU, THANKS TO WHICH WE PROVIDE YOU WITH EQUIPMENT READY FOR USE IMMEDIATELY AFTER CONNECTING TO ELECTRICITY.

⌚ SAVE YOUR TIME ⌚

BUY INCLUDED AND WE'LL TAKE CARE OF THE REST!

JOIN THE BEST - START YOUR WELDING ADVENTURE WITH US!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

TECHNICAL DATA:

• Power supply: AC 230 [V], 50/ [Hz],
• Security required: 25 [A] / C
• Power consumption: 7 [kW]
• Efficiency: 60 [%]
• Uo idle voltage: 70 [V]
• TIG AC welding current: 10 - 200 [A]
• TIG DC welding current: 10 - 200 [A]
• MMA welding current: 10 - 200 [A]
• Adjustment - current rise/fall time: 0 - 10 [s]
• Adjustment - gas outflow time after welding: 0 - 10 [s]
• Welded time at point: 0,1 - 10 [s]
• PULSE BALANCE: 5-95 [%]
• PULSE frequency: 0,5-999 [Hz]
• AC Balance: -5 - 5
• HOT START function: YES
• ARC FORCE function: YES
• BiLEVEL function: YES
• 2T/4T function: YES
• TIG function POINT: YES
• Housing protection class: IP23
• Weight: 10 [kg]

• Inverter welding machine MAGNUM THF 238 PRO-X AC/DC PULS
• Welding torch TIG SR26 4m - 1 pc.
• mass cable 3 m - 1 pc.
• Gas hose - 1 pc.
• Instruction for using in Polish
• Warranty card

(SET OF 15) D.

PRODUCT GALLERY:

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Magnum
Parametry	Power consumption	8 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Device weight	10 kg
Parametry	Welding range	10–200 A
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	400 cm
Parametry	Additional features	infinitely adjustable welding current
Parametry	Product weight with unit packaging	15 kg
Parametry	Manufacturer code	U I THF238PRO
Parametry	EAN (GTIN)	5905323107465
Parametry	Packaging status	original
Parametry	Model	U I THF238PRO-X
Parametry	Welding methods	MMA,TIG