Suvirinimo aparatas MIGOMAT MAGNUM MMA INVERTER 220W 230V 60% IGBT

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIGOMAT MAGNUM MMA INVERTER 220W 230V 60% IGBT. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U MI 220W MMA MAPL-15
• Ilgis: 665 mm
• Plotis: 325 mm
• Aukštis: 405 mm

⏩The most important advantages

✅MIG/MAG and MMA in one device – Universal welding machine for workshop, repair and assembly work.

✅Welding with and without gas – Possibility to work with classic gas shielded wire and FLUX self-shielded wire after changing polarity.

✅ MIG/MAG current up to 200 A – The wide range of 30 to 200 A allows welding of both thinner elements and more robust steel structures.

✅Inductance adjustment – Allows you to adjust the characteristics of the arc, reduce chipping and obtain an aesthetic weld.

✅ MIG/MAG handle disconnector – Facilitates quick connection, replacement and servicing of the welding torch.

✅Wire support 0,6 / 0,8 / 1,0 mm – Allows you to adjust the diameter of the wire to the type of material and the work performed.

✅IGBT technology – Ensures stable operation, fast response to changes in parameters and high reliability of the device.

✅ Power supply 230 V – The welder can be used in a typical single-phase installation with 20 A protection.

⏩WHAT WILL YOU FIND IN THE PACKAGE?

✔ MAGNUM MIG-MMA 220W welding machine

✔ MIG MB-15/3m welding torch

✔ MMA electrode cable

✔ Bulk cable

✔ User Manual PL

⏩WELDING ACCESSORIES FREE OF CHARGE

➡ welding disc,

➡ brush-hammer.

⏩MAGNUM MIG 220 WELDING MACHINE IN IGBT

MAGNUM MIG-MMA 220W IGBT is a semi-automatic welding machine designed for manual, electric welding of low-carbon steel, low-alloy steel (MAG), alloy steel (MIG) and aluminum and its alloys. The device can also be welded using MMA method using hot melt coated electrodes.

The device is designed for all kinds of welding work in locksmith workshops, repair workshops, industrial and factories. The power source was built on IGBT transistors providing a minimum of electromagnetic interference, enabling increased efficiency and reliability of the power source, lower energy consumption and rapid adjustment of the current to changes in parameters during welding.

⏩Professional 2R wire feeder

Stable feeding of welding wires of various types. Ability to work with longer MIG handles. Good welding parameters - better weld quality.

The device is equipped with a proven wire feeding mechanism that has been working in MIG/MAG devices for many years.

⏩ EUROCONNECTOR

The welder has a standard euroconnector that allows quick connection, disconnection or replacement of the MIG/MAG handle. The solution also facilitates servicing the cable and choosing the right handle for the job.

⏩ MOBILE WORKSTATION

Thanks to the screw-on cylinder platform, the device can create a complete, convenient MIG/MAG welding station in the gas shield. The welder and cylinder stay together, making it easy to organize your workflow and move the set quickly between stations.

Everything at hand – The welder, gas cylinder and wires form one orderly work set, ready to work without having to move the elements separately.

Convenience of manoeuvring – The compact design makes it easy to move the device in the workshop, garage or repair station, also where the working space is limited.

Stable cylinder position – Dedicated cylinder space helps keep it upright and increases work safety when using the kit.

⏩Power supply parameters

• Power Supply: 230V
• Welding methods: MIG, MAG, MMA
• Maximum welding current: 200A MIG/MAG (180A MMA)
• Working cycle: 60%
• Max. power consumption: 6,2kW
• Network Security: 20A
• Displays of welding parameters
• Net weight: 13,5kg

⏩ MIG/MAG welding parameters:

• Welding Current: 30 - 200A
• Welding Voltage: 16,5 - 23V
• Wire diameter: 0,6 / 0,8 / 1,0 mm
• Wire spool weight: max. 5kg
• Inductance: 0-10
• Polarity change: YES

⏩ MMA welding parameters:

• Welding Current: 30-180A
• Idle Voltage: 56V

⏩ Frequently Asked Questions

• Is the welding machine powered by 230 V? – Yes, MAGNUM MIG-MMA 220 W IGBT is powered from a single-phase 230 V network and requires 20 A protection.
• What methods can be welded? – The device supports MIG/MAG, FLUX and MMA methods, i.e. welding with gas shielded wire, self-shielded wire and wrapped electrode.
• Can weld without gas? – Yes, after a proper change of polarity, the welding machine allows you to work with FLUX self-shielding wire.
• What is the maximum welding current? – The MIG/MAG current range is 30 to 200 A, while MMA is 30 to 180 A.
• What wire diameters does the welding machine support? – The device is adapted to wire with a diameter of 0,6 / 0,8 / 1,0 mm and spools weighing up to 5 kg.
• Does the welding machine have inductance adjustment? – Yes, inductance adjustment allows you to change the characteristics of the arc, limit chipping and adjust the weld to the work performed.
• Can the MIG/MAG handle be easily replaced? – Yes, the 220 W model has a standard euroconnector for quick connection or replacement of the handle.
• What does 60% cycle mean? – This means about 6 minutes of welding and 4 minutes of break in a 10-minute work cycle under specific measurement conditions.

• MIG/MAG - welding with a hot melt electrode (in the form of wire wound on a spool) in a gas shield. It is a popular welding process that is characterized by high efficiency and good quality of the welded joint. Semi-automatic MIG/MAG welding is one of the most popular methods both in workshop conditions as well as in high-performance production. This method is also relatively easy to learn by novice users.

• FCAW (FLUX) - a popular variant of the MAG method - semi-automatic welding with a hot melt electrode (welding wire on a spool). The main difference is that it is welded with a special self-shielding wire, which does not require the use of shielding gas. Simplifying, we can say that this method combines two processes: MAG welding and MMA electrode welding.

• MMA - the oldest variety of arc welding - the so-called. welding with a wrapped electrode. This is probably the best known and widespread welding method. The type and diameter of the wrapped electrode is selected depending on the type of material being welded.

• Inductance - optimizes arc characteristics depending on the thickness of the welded material. This function is useful when welding thin elements using the MIG/MAG method - it prevents them from burning out (the thinner the inductance element should be greater). Inductance affects the shape of the weld, its width, depth of melting and the number of splashes,

Choose a brand whose history dates back to the beginning of the twenty-first century. Magnum is the leading brand of welding equipment in Poland.

A wide range of Magnum devices meets the needs of not only novice users, but also more advanced ones. Depending on the selected model, it can be dedicated to workshop applications as well as for heavy industry.

Customers choose the Magnum brand most often due to its high quality, affordable price and reliability.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Magnum
Parametry	Power consumption	6.4 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Device weight	14 kg
Parametry	Welding range	30–200 A
Parametry	Height	405 mm
Parametry	Length	665 mm
Parametry	Width	325 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Product weight with unit packaging	17.5 kg
Parametry	Manufacturer code	U MI 220W MMA MAPL-15
Parametry	EAN (GTIN)	5905214997243
Parametry	Packaging status	original
Parametry	Welding methods	MIG/MAG,MMA
Parametry	Additional features	infinitely adjustable welding current,EURO handle