Suvirinimo aparatas MAGNUM MIG 240 DUAL PULSE LCD SYNERGY TIG

Trumpai apie prekę

Prekė: Suvirinimo aparatas MAGNUM MIG 240 DUAL PULSE LCD SYNERGY TIG. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U MI 240 DP LCD ZESTAW#1
• Ilgis: 661 mm
• Plotis: 340 mm
• Aukštis: 450 mm

+ MIG/MAG, MMA WELDING SET, INCLUDING:

✅ 1 CYLINDER WITH REDUCER

✅ MIG EURO MB24 WELDING TORCH 3m - 1 pc.

✅ FEEDER ROLL FOR ALUMINUM 1.0-1.2mm U - 2 pcs.

✅ FEEDER ROLL FOR STEEL 0.8-1.0mm V - 2 pcs.

✅ WELDING WIRE 0.8mm 5KG

✅ WELDING ACCESSORIES

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ ➖➖➖➖

The MAGNUM MIG 240 DP LCD SYNERGY welding machine is a technologically advanced semi-automatic welding machine, designed for arc welding using the following method:

• MIG - MIG-MAG synergic welding
• MIG PULS - Synergic MIG welding with a single pulse
• MIG 2-PULS - Synergic MIG welding with double pulse
• MMA - Welding with coated electrodes (rutile, basic, acidic).
• TIG LIFT DC - TIG Lift welding
• TIG LIFT DC PULS - TIG Lift welding with pulse
• FLUX - Welding with self-shielding wire

as well as BRAZING OF GALVANIZED SHEETS.

The device has been designed for all kinds of welding works in car workshops, locksmith workshops , repair shops, industrial workshops, factories, etc.

The welder is dedicated to professionals who require the highest standards for welding equipment.

The MAGNUM MIG 240 DP LCD SYNERGY welder is used for welding:

✔ non-alloy steels

✔ low alloy steels

✔ alloy steels

✔ stainless steel

✔ acid-resistant steel

✔ titanium

✔ copper and its alloys

✔ aluminum and its alloys

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ ➖➖➖➖

➡ The device is equipped with overload protection , which increases its reliability.

❄ The device has a fan cooling system , which significantly increases its efficiency.

The MAGNUM MIG 240 DP LCD SYNERGY device has, apart from other advantages, a synergistic program for welding aluminum alloys and brazing with CuSi3 wire, unique in this class of devices. The design and software allow to obtain the highest quality weld when welding all weldable materials, made of black steel, stainless steel, copper alloys and aluminum.

☀ SYNERGY - is a ready-made program, thanks to which, based on a few entered data, it facilitates the preparation of the device for work in the right way. Synergy is a great convenience for DIY enthusiasts as well as for professionals.

The design and software, combined with digital control via a microcontroller, allow you to obtain the highest quality welding parameters, especially when welding aluminum and its alloys.

Inductance adjustment allows you to optimize the arc characteristics depending on the thickness of the welded element and the welding method and conditions.

The function is useful during MIG/MAG welding of thin elements, preventing their burn-through and braze welding of galvanized elements.

The thinner the MIG/MAG welded element, the higher the inductance should be (soft arc - less penetration), for thick elements the opposite (hard arc - greater penetration).

The standard neutral inductance setting is in the middle of the scale.

Changing the inductance value also reduces the amount of welding spatter during welding in the CO2 shield.

The optimal setting of the inductance value depends on several factors and may differ from the standard recommendations, it should be selected during welding tests by manipulating the potentiometer knob.

THANKS TO THE ADJUSTMENT OF INDUCTION, THE WELDING MACHINE IS SUITABLE FOR BRAZING!

☀ VERSATILITY OF THE DEVICE ☀

The MAGNUM Migomat is a device with a wide range of applications, designed as an inverter power source for welding with a MIG/MAG gas-shielded fusible wire or FCAW self-shielding wire (after changing the polarity), welding with the MMA lagging electrode, as well as with the TIG Lift method

✔ MIG/MAG welding

Gas-shielded arc welding is one of the most widely used processes for the production of welded structures. The semi-automatic welding process consists in fusing the edges of the welded object and the material of the consumable electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ MMA welding

in the MMA method, a coated electrode is used, consisting of a metal core covered with a coating. An electric arc is generated between the end of the electrode and the material to be welded. The arc is ignited by touching the tip of the electrode to the workpiece.

✔ TIG DC welding

In the TIG (Tungsten Inert Gas) method, the electric arc is ignited in a shield of inert gas (argon), between the welded element and a non-consumable electrode made of pure tungsten or tungsten with additives. In the TIG DC Lift mode, the arc is ignited when the electrode contacts the workpiece. In TIG DC mode, the current is constant.

❗❗ You can weld with the TIG method after connecting an additional handle, available at our auctions ❗❗

✔ Welding with FCAW self-shielding wire

Thanks to the polarity reversal function, it is possible to weld without shielding gas with FCAW self-shielding wire. The wire is intended for general production works, also in field conditions, and for welding structures that are not subject to impact resistance requirements. DC(-) welding current.

Self-shielding cored wire fi 0.8mm / 1kg E71T-GS is intended for welding ordinary and high-strength carbon steels not exceeding 510 MPa .

It is used in prefabrication, construction, production of tanks, agricultural equipment , etc. Used both in the production and repair of devices.

SELF SHIELD WIRE IS AVAILABLE SEPARATELY AT OUR AUCTIONS AND IN OTHER SETS

APPLICATION

• Designed for all welding positions , single-layer fillet and butt welds, in automatic and semi-automatic welding.
• It can be used for aluminized and galvanized steel with a thickness of 1.2 - 5.0 mm .
• Developed for general use where there are no impact resistance requirements.

ADVANTAGES AND FUNCTIONS OF THE WELDING MACHINE:

⭐IGBT INVERTER TECHNOLOGY Insulated Gate Bipolar Transistor - is a modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment .

⭐ EASE OF USE - the welder is equipped with an easy-to-use control panel and LCD display, so it can be used even by amateurs.

⭐ MOBILITY AND COMFORT - CHASSIS WITH PLACE FOR A CYLINDER - the welder has a mobile chassis with swivel wheels at the front. At the back of the device there is a place for a shielding gas cylinder and a holder to secure the cylinder against movement.

⭐ WORK IN THE INDUSTRY - thanks to the high quality of workmanship and multifunctionality, the device can be used in professional and industrial works.

⭐ EURO CONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

⭐ FAN COOLING SYSTEM, which definitely increases its efficiency.

⭐ OVERLOAD PROTECTION, ensures the reliability of the device.

⭐36 CHANNELS MEMORY - The device has 36 memory channels on which the user can save and recall any settings.

⭐ BRAZING - it's a method that is quite similar to MIG / MAG welding, but the energy supplied in this case is much lower. This causes that brazing is used to connect thin sheets covered with a layer of zinc . The described method is a bonding process during which the solder is melted, not the material we are working with .

⭐ SYNERGY - Thanks to the perfectly selected algorithm of the synergic program and digital process control, this device is extremely easy to use and allows people even without welding experience to make welded joints.

⭐ TWO-STROKE 2T - pressing the button initiates gas flow and welding current, releasing the button turns off welding current and gas flow

⭐ S2T - Special two stroke with hot start and end current.

⭐ FOUR-TAKT 4T - pressing and releasing the handle button initiates the gas flow and welding current, pressing and releasing the button again turns off the welding current and gas flow.

⭐ S4T - Special four stroke with hot start and end current

⭐ TIG WELDING WITH PULSE - consists of temporary hits of a higher current, during which a drop of metal is broken from the electrode wire and moved to the weld. The current has a character once

✅ ANTI STICK - short-circuit function - reduces the welding current to the minimum value when the welder makes a mistake and the electrode sticks to the welded material. This makes it easier to detach the electrode from the welded material and protects the electrode holder from damage.

✅ HOT START : makes it easier to ignite the electrode by providing more welding current with each arc ignition.

✅ ARC FORCE : facilitates the transfer of a drop of molten electrode to the welded material, preventing the extinction of the arc when the electrode drop comes into contact with the weld pool

✅ SPOT WELDING - with the option of setting the welding time at the point. A function that allows you to perform even, spot welds or spot welding thin plates with other elements. This method is used, for example, in the production of chassis and car bodies, but also in the home workshop.

✅ CIRCULAR SPOT WELDING - Pressing the MIG torch button starts the welding current. The welding current lasts as long as it is set in the Sptt position. Then the arc is extinguished and there is a Stop pause. The pause time is adjustable and can be 0.1 ÷ 25.5 seconds. After the set Stop time has elapsed, the machine will start welding again. The weld-pause, weld-pause ... cycle lasts as long as the MIG torch button is pressed.

✅ VRD - is a voltage reduction system whose task is to turn off the power within a few milliseconds after finishing welding. This function is also responsible for reducing the voltage on the covered electrode to a safe level.

✅ WIRE BURN BACK FUNCTION - It is possible to adjust the time during which the voltage at the output of the device is still present after stopping the wire feeding. This function prevents the welding wire from getting stuck in the workpiece and prepares the end of the wire for the next arc ignition. Higher values of the function cause the wire to burn closer to the contact tip.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ ➖➖➖➖

MEETING CUSTOMERS, BASED ON OUR MANY YEARS OF EXPERIENCE, WE CREATE PROFESSIONAL KITS FOR YOU, THANKS TO WHICH WE SUPPLY EQUIPMENT READY FOR USE IMMEDIATELY AFTER CONNECTING TO POWER.

⌚ SAVE YOUR TIME ⌚ BUY IN A SET AND WE WILL TAKE CARE OF THE REST!

JOIN THE BEST - START YOUR WELDING ADVENTURE WITH US!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ ➖➖➖➖

• New 8L MIX or CO2 cylinder with 10-year legalization - 1 pc.
• Co2/Ar gas reducer with 2 pressure gauges - 1 pc.
• Professional gloves - 1 pair
• Anti-spatter spray - 1 pc.
• Magnetic square - 11 kg - 1 pc.
• Welding wire 5 kg 0.8 mm - 1 pc.
• Contact tip 0.8 mm - 5 pcs.
• Gas nozzle for the handle - 2 pcs.
• Power socket - 2 pcs.
• Gas distributor - 2 pcs.
• Pack of electrodes - 1kg

The MAGNUM MIG 240 DP LCD SYNERGY device has the ability to adjust additional, advanced parameters:

MMA

• WELDING CURRENT - Adjustable in the range of 30 ÷ 180 A,
• ARC-FORCE - Adjustment in the range of 0 ÷ 100%
• HOT START - CURRENT - Adjustable in the range of 20 ÷ 180 A
• HOT START - TIME - Adjustment in the range of 0 ÷ 50 s
• ARC CHARACTERISTICS - Regulation in the range: general (constant current), for "difficult-weldable" electrodes, including cellulose ones (constant power)
• VRD - On / Off

TIG LIFT / TIG LIFT PULS

• WELDING CURRENT - Adjustable in the range of 30 ÷ 180 A
• PULSATION FREQUENCY - Adjustment in the range of 0.1 ÷ 99 Hz
• PULSE BALANCE - Adjustment in the range of 5 ÷ 95%
• PEAK CURRENT (Amplitude) - Adjustable in the range of 1 ÷ 500 %

MIG/MAG

• Burnback time - correction of the wire burnback height. Correction in the range: -50 ÷ 50 [%].
• Pulse frequency - regulation of pulsation frequency. Adjustment range: 0.5 ÷ 5.0 [Hz].
• Pulse width - pulsation balance. Adjustment range: 20 ÷ 80 [%]. The 50% setting is the balance (middle) setting.
• Pulse height - current amplitude adjustment. Adjustment range: 5 ÷ 50 [%].
• Peak current - correction of the peak current voltage. Correction range: -50 ÷ 50 [%].
• Base current - correction of the base current voltage. Correction range: -50 ÷ 50 [%].
• Free wire advance - adjustment of the initial speed of the wire (access). Adjustment range: 1.0 mm to 15 m. The duration of the leveling speed is 4 seconds.
• Gas flow before welding - adjustment of gas flow time before welding. Adjustment range: 0 ÷ 10 [s].
• Gas flow after welding - adjustment of gas flow time after welding. Adjustment range: 0.1 ÷ 50 [s].
• Final current - regulation of the final current when welding with the S2T and S4T functions. Adjustment range 24 ÷ 200 [%].
• Initial current - adjustment of the initial current (hot start) when welding with the S2T and S4T functions. Adjustment range 24 ÷ 200 [%].
• Current rise time - adjustment of the duration of the initial current (hot start) when welding with the S2T function. Adjustment range 0 ÷ 50 [s].
• Current fall time - adjustment of the duration of the final current when welding with the S2T function. Adjustment range 0 ÷ 50 [s].
• Final voltage - correction of the final current voltage when welding with the S2T and S4T functions. Correction range: -50 ÷ 50 [%].
• Starting voltage - correction of the starting current voltage when welding with the S2T and S4T functions. Correction range: -50 ÷ 50 [%].
• Spot welding duration - adjustment of the welding time at the spot for spot welding. Adjustment range: 0.1 ÷ 9.9 [s].

EFFICIENT WORK WITH A PROFESSIONAL WIRE FEEDER

The welder has been equipped with a professional wire feeder, which guarantees the stability and continuity of operation of the device.

The 4-roller feeder enables precise advancement of the welding wire, excluding its slippage.

The feeder has a quick wire change knob as well as a wire feeding roller.

The set includes rollers:

• For steel wire 0.8-1.0mm V - 2 pcs.
• For aluminum wire 1.0-1.2mm U - 2 pcs.

HANDLE WITH EURO CONNECTOR

The welder has a EURO socket for the MIG welding cable. The socket allows you to quickly change the handle in the same standard and, most importantly, it allows you to change the polarity for welding with FLUX self-shielding wire.

The warranty service is carried out in the door-to-door system without transport costs on the part of the user.

The power source was built based on IGBT transistors

(Insulated Gate Bipolar Transistor), which ensure a minimum of electromagnetic interference, low power losses in the basic systems, enabling increased efficiency and reliability of the power source. Very high efficiency , which translates directly into lower energy consumption, and high switching frequency, ensure instant adjustment of the current to changes in parameters during welding.

TECHNICAL DATA :

MIG/MAG WELDING PARAMETERS:

• MIG/MAG welding current: 30 - 200 A
• MIG/MAG welding voltage: 16.5 - 24 V

TIG LIFT/MMA WELDING PARAMETERS:

• MMA welding current: 30 - 180 A
• Idle voltage: 56V

TECHNICAL DATA:

• Power supply: AC 230V, 50Hz,
• Required protection: 25 A class C
• Efficiency: 60%
• Wire spool weight: max: 5 kg
• Wire diameter: 0.8/1.0/1.2mm
• Housing protection class: IP21S
• Weight: 16.4 kg

ADDITIONAL FEATURES:

• 2/4 TACT function: Yes
• S2T/S4T function: Yes
• SPOT function: Yes
• TIGLIFT: Yes
• Tig LIFT with Pulse: Yes
• Post Gas : Yes
• Pre- Gas : Yes
• Spot Welding : Yes
• Cyclic Spot Welding : Yes
• Pulse: Yes
• Double Pulse: Yes
• Brazing : Yes
• ARC FORCE: Yes
• HOT START: Yes
• VRD: Yes
• BURN BACK: Yes
• SYNERGY: Yes
• MEMORY: Yes

BY BUYING FROM US YOU RECEIVE:

• MAGNUM MIG 240 LCD DUAL PULS WELDING MACHINE SYNERGY
• MIG/MAG WELDING TORCH MB24 - 3 m
• MMA ELECTRODE HOLDER - 1 pc.
• MASS HANDLE - 1 pc.
• ALUMINUM WIRE REFILL - 1 pc.
• STEEL WIRE REFILL - 1 pc.
• CURRENT TIP - 6 pcs.
• ROLL FOR STEEL WIRE 0.8/1.0mm - 2 pcs.
• ROLL FOR ALUMINUM WIRE 1.0/1.2 - 2 pcs.
• CLIP TIE - 2 pcs.
• GAS HOSE - 1 pc.
• INSTRUCTIONS IN POLISH LANGUAGE
• WARRANTY CARD

+ MIG/MAG WELDING KIT:

• New 8L MIX or CO2 cylinder with 10-year legalization - 1 pc.
• Co2/Ar gas reducer with 2 manometers - 1 pc.
• Professional welding gloves - 1 pair
• Welding wire 5 kg 0.8 mm - 1 pc.
• Anti-spatter spray - 1 pc.
• Magnetic square - 11 kg - 1 pc.
• Current tip - 5 pcs.
• Gas nozzle for the handle - 2 pcs.
• Power socket - 2 pcs.
• Gas distributor - 2 pcs.
• Pack of electrodes - 1kg (2.5 or 3.2mm to choose from)

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Magnum
Parametry	Power consumption	12.5 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	4 mm
Parametry	Wire diameter (mm)	0,8-1,2
Parametry	Device weight	16.4 kg
Parametry	Welding range	30–200 A
Parametry	Height	450 mm
Parametry	Length	661 mm
Parametry	Width	340 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Product weight with unit packaging	20 kg
Parametry	Manufacturer code	U MI 240 DP LCD ZESTAW#1
Parametry	EAN (GTIN)	5905214998479
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	transport wheels,infinitely adjustable welding current,EURO handle,LCD display