Suvirinimo aparatas IDEAL TECNO MIG 205 LCD SYNERGIC, inverterinis MIG

Trumpai apie prekę

Prekė: Suvirinimo aparatas IDEAL TECNO MIG 205 LCD SYNERGIC, inverterinis MIG. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: TECNO MIG 205 LCD SYNERGIC
• Ilgis: 540 mm
• Plotis: 240 mm
• Aukštis: 385 mm

5903991108401

Technical data:

• Welding Current Adjustment Range 35 - 200 A MIG
• Welding Current Adjustment Range 20 - 150 A MMA/TIG
• Current taken from the mains 20,3 A
• 25C power supply network protection
• Rated supply voltage 230 V; 50Hz (1ph)
• Power 6,4 kW
• Idle voltage 64 V
• Current at work 60% 200 A (MIG)
• Wire diameter 0,8 - 1,2 mm
• Welding electrode diameter 1,6 - 3,2 mm
• Degrees of Welding Current Adjustment Gradually
• Wire spool size 0,45 - 5 kg
• Degree of protection IP 23S
• Weight of the device: 15 kg

Features of the migomate:

• The device has been designed for a wide range of applications: from maintenance work to car body repairs.
• TECNOMIG 205 LCD is used for soldering galvanized sheets, welding stainless steel, carbon and low alloy steels and aluminum. Welding is carried out in an inert gas shield, active or mixture and with reverse polarity without gas.
• Quick synergistic adjustment of welding parameters via LCD display makes the device very easy to use. All you need to do is set the thickness of the welded material and start welding: intelligent and automatic welding arc control system, step by step, will select the best parameters, for each welding position and for each material.
• The user can also manually set the length of the welding arc and adjust the appearance of the weld to suit their needs.

Scope of delivery:

1. IDEAL TECNO MIG 205 LCD SYNERGIC - Inventory welding machine
2. MIG welding torch 15 3 m
3. mass cable 2m
4. electrode cable 2 m

Features of IDEAL TECNO MIG 205 LCD:

• MMA - rutile electrode, for all non-alloy, low-alloy and high-alloy steels (steel, cast iron and non-ferrous metals).
• MIG-MAG - wire welding. For welding non-alloy, low-alloy and high-alloy steels, and non-ferrous metals.
• FLUX - wire welding, without the use of gas.
• TIG Lift - arc welding process with a non-melting electrode in an inert gas shield.
• LUTOSPELING - wire welding, mainly used by sheet metal workers, for welding in galvanized

Trasistor technology - IGBT.

Relatively newer, lighter and smaller overall technology than MOSFET, which translates into greater mobility of such a device. In addition, the device works better on weaker electrical installations and in high-voltage welding. Much smaller (approx. 30% ) power consumption.

Welder Assistance Features:

• ADJUSTABLE WIRE BURNING HEIGHT - DETERMINES THE DISTANCE AT WHICH THE WIRE IS TO BURN AFTER WELDING. IN EXTREME CASES WHEN THE "BURNING" IS MISALIGNED, THE WIRE IS WELDED TO THE WELDED MATERIAL OR HEATED IN THE CURRENT TIP CAUSING IT TO BLOCK.
• 2T/4T - method of wire feeding through the device.
• INDUCTION - The function is useful during MIG/MAG welding of thin elements, preventing them from burning out and soldering galvanized elements. The thinner the met MIG/MAG welded element, the higher the inductance should be (soft arc - less melting

Specifications