Suvirinimo aparatas FRONIUS TransSteel 3000C Pulse 4,075,227

Trumpai apie prekę

Prekė: Suvirinimo aparatas FRONIUS TransSteel 3000C Pulse 4,075,227. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Fronius
• Modelis: TransSteel 3000 C Pulse

FRONIUS TRANSSTEEL 3000 C PULSE is an advanced inverter welding device that offers many advantages in the field of MIG/MAG, TIG and MMA welding with a wrapped electrode. The source is equipped with a 4-roll feeder for stable feeding of wires from large spools and small ones, the use of long welding handles and aluminum welding. It is equipped with two solenoid valves (one for the MIG/MAG method, the other for the TIG method, which opens up many possibilities for welding in this method). The source is adapted to work with a generator / generator set.

Fronius TransSteel 3000 C Pulse can be prepared for use in just three steps: simply select the type of wire, its diameter and gas type, after which welding can begin.

Functions with MIG/MAG method which m.in. has a TRANSSTEEL 3000C PULSE ;

- short-circuit current welding

- PULSATION arc welding process guarantees low-spatter welding and accurate work in the entire range

- current welding process in double PULSE - "SynchroPuls" used, among others, for joints of welded aluminum alloys, in which the scaly appearance of the weld is desired and introduces less heat

- SYNERGY -just select the type of wire, its diameter and gas type, after which you can start welding

(Carbon steel, CrNi stainless steel, CuSi3 soldering, AlMg aluminum, AlSi, Metal Cored, Rutil FCW powder wires, Basic FCW, self-shielding wires - 118 synergistic lines)

- MANUAL settings

– Steel Root program – is a characteristic created specifically for making the ridge layer of the weld. Its special feature is good filling of gaps or filling of wide grooves.

– Steel Dynamic program - is a characteristic with a particularly hard and focused welding arc. The result is high welding speeds and deep melting.

- Easy Job memory - the ability to save 5 tasks selected quickly from the device panel

- Welding arc length correction

- Dynamics Regulation

- 2-bar mode / 4-bar mode / 2-bar special mode / 4-bar special mode

- Button for threading wire, button for gas flow

- Spot / multi-stitch welding

- Air filter

- Gas pre-flow time, gas outflow time after welding, wire threading speed, burning effect, glow current, wire length for safety shutdown, spot welding time /multi-stitch welding time, intermittent welding interruption time, start current, end current, start current duration,duration of the final current, the effect of burning by reversing the wire at the end of welding, full regulation of the PULSE.

Functions with TIG method - which m.in. has a TRANSSTEEL 3000C PULSE :

- Dedicated solenoid valve for TIG method

- PULSEM and uniform welding

- adjustable; gas pre-outflow time/gas outflow time after welding, starting current/final current, rise/fall

- Contact glow - accurate to the point contact glow equals high frequency glow and contributes to increased user-friendliness

- TAC attachment function

- Pulse welding TIG in the range from 1-990 Hz

- The use of welding torches with up/down adjustment even during TIG welding. (TIG handles with up-down amperage adjustment, gas flow opening / closing button - separate solenoid valve for TIG method in the device)

Functions with MMA method - wrapped electrode which m.in. has a TRANSSTEEL 3000C PULSE:

-Hot start function

-AntiStick feature

TECHNICAL DATA

Maximum welding current: 300 A

Minimum welding current: 10 A

Welding current / switch-on time [10 min/40°C]: 280A

Welding current / switch-on time [10 min/40°C]: 240A

Operating voltage range: 14,5 - 29V

Mains voltage [+/-15%]: 380 / 400V

Network Fuse: 35A

The price applies only to the TransSteel 3000 C Pulse source without a trolley and cable.

Specifications