Signalizatorių rinkinys DELPHIN CODER 2+1

Trumpai apie prekę

Prekė: Signalizatorių rinkinys DELPHIN CODER 2+1. Kategorija: Signalizatoriai žvejybai.

• Gamintojas: Delphin
• Modelis: coder

Delphin CODER is a set of beacons with a control panel, in which the ideal ratio of favorable price to performance is maintained. In particular, its advantages are reliability and 100% functionality, comparable to more expensive sets. The signal between the beacon and the control panel can be transmitted over a distance of up to 140 m under ideal conditions. The whole is delivered in a hard plastic case, which ensures the safety of the equipment during transport.

The beacon is powered by a 1x12V LR23A battery, which has a long enough lifespan. In the case of a low battery level, the indicator will alert you with a short beep. Use the “V” switch to select one of 5 volume levels, including silent mode. It is also possible to select the desired level of tone and sensitivity (in the range of 1-9 cm), which also has 5 different levels. The undisputed advantage of the CODER beacons is the ability to choose from 7 colors of the signaling LED. Everyone can choose their favorite, and if you want to change, you can simply choose a different color according to the instructions. A different sound will notify you when you take it, and the LED will light up for 15 seconds after each take. At the bottom there is an entrance to the 2,5 mm connector. It is also possible to turn on the position diode when fishing at night.

The control panel reliably signals taking with sound, light, and in the case of moving the lever to the appropriate position also with vibrations. With the "V" switch, you can select one of 5 volume levels, including silent mode, and use the switch marked "T" to select the desired tone. The control panel has four colored LEDs that light up continuously for 15 seconds after taking. It is powered by a 1x9V battery. When its lifespan comes to an end, it will be signaled by a continuous short beep. The control panel, like beacons, stores all selected settings.

For this set, you can save the maximum configuration of 3+1 (3 beacons and one receiver).

The average battery life is 100 hours of continuous operation. This value may be affected by the environment and the age and condition of the battery.

The Delphin CODER can be paired with the LightCONTACT lamp.

Does not include batteries.

A WARNING! On the control panel of the CODER set, it is possible to turn off and then turn on individual LEDs, as shown in the video "On/off LEDs". The LED can be turned off when the receiver is turned on by holding the “P” button for 2 seconds and then pressing it briefly. In the same way, you can turn the diode back on. The individual LEDs can be switched between each other by pressing the “P” button for 2 seconds without another short press.

Technical parameters:

The 2+1 set includes:

- 2x bite alarm

- 1x control panel

- 1x transport case

- 1x belt holder at the control panel

RECEIVER / functions:

- 5 volume levels (V-button, including silent mode)

- 5 different signaling sounds (T-button)

- Vibration mode (switch - right position)

- 4 color signaling diodes

- Save selected settings in memory

- Two-position ON / OFF / VIBRATION switch

- Memory diode - lights continuously for 15 seconds. after taking

- Low battery indicator (continuous signal)

- Testing mode of the kit

- Range of 140m depending on the terrain

- Powered by 1x9V battery

BEACON / Functions:

- Waterproof

- 5 volume levels (V-button, including silent mode)

- 5 different signaling sounds

- 5 levels of sensitivity (S-button)

- 7 possible colors of signal diode

- Save selected settings in memory

- Backbite signal - different tone

- Memory diode - lights continuously for 15 seconds. after taking

- Low battery indicator with short beep

- Night light position

- Non-slip rod bed

- Input for jack 2.5 mm

- 1x12V power supply (type LR23A)

Specifications