Remonto rinkinys pripučiamoms valtims, SUP, čiužiniams – klijai ir tinklelio lopai

Trumpai apie prekę

Prekė: Remonto rinkinys pripučiamoms valtims, SUP, čiužiniams – klijai ir tinklelio lopai. Kategorija: Priedai.

• Gamintojas: Dr. Boat
• Modelis: ZESTAW NAPRAWCZY

Repair Kit Adhesive Dr. Boat + PVC Patch + Reinforcement Mesh + Waterproof Glue Box

PATCH COLOR INCLUDED: MIX BLACK, GRAY, GREEN

*Specialized ADHESIVE FOR PVC Pontoons and Pools DR.BOAT 2 IN 1 (glue and liquid patch) with cold welding effect + reinforcement mesh for free.

EFFECTIVE ADHESIVE FOR INFLATABLES, SWIMMING POOLS AND OTHER PVC PRODUCTS.

We offer an innovative and specialized new adhesive for repairing PVC products. It can be used to glue inflatables, swimming pools, tarpaulins, etc.

Main advantages and differences from other adhesives:

The glue is specialized. The adhesive formula is formulated so that it can be used to repair items used in fresh and salt water.

It can be used as a standard adhesive for gluing patches or as a liquid patch.

During gluing does not require hardener and heating.

After drying, it retains the strength and flexibility of the glued object.

It is sturdy and flexible.

Important! If the adhesive is used, transported or stored in the cold season at a temperature below + 18°C, put the glue on the room heater or in hot water (about 50 - 60°C) for 2 - 3 hours before use.

Brief instructions:

Variation with patch:

Degrease thoroughly glued surfaces. Lubricate the patch and glued object with a thin layer of glue. We apply the patch to the glued object and press it down and hold it for 1 min. The minimum drying time is 6 hours but it is best to wait 24 hours.

Variant without summer:

Degrease the damaged area.

The glued object should be protected from movement.

Lubricate the damaged area with a thick layer on the surface 1 cm larger than the damage.

We wait 20 minutes.

We put on a second thick layer.

After 5 hours we remove the protection against movement and after 24 hours the glued object can be used

In the case of major damage (cutting above 3 cm), the repair is carried out using a reinforcing mesh, which is complete with glue. We prepare a net 2 cm larger than the damage. We thoroughly degrease the surface. Apply glue to the damaged area and push it into the mesh. After 20 minutes, apply the adhesive again on a surface 1,5 cm larger than the previous layer. Glued place achieves sufficient strength after 24 hours

DR.BOAT - is a product that is able to remove virtually any defect caused to the PVC tissue product at a molecular level.

· High adhesion

· UV resistant

· Vulcanization (monolith with product)

· Flexible

· The original properties of the material base are preserved

WHY SHOULD I BUY THIS PRODUCT?

• SPECIALIZED - The adhesive formula is developed in such a way that it can be used to repair objects used in fresh and salt water.
• UNIVERSAL - It can be used as a standard adhesive for gluing patches or as a liquid patch.
• FLEXIBLE
• DURABLE
• DOES NOT REQUIRE HARDENERS
• UV-RESISTANT

SET INCLUDES

• GLUE
• REINFORCEMENT MESH
• Patches x6
• AIRTIGHT CONTAINER
• PACK SIZE

*Hermetic waterproof container for repair kit

The box is made of hard and damage-resistant plastic, reusable. The lid is connected to a container with a protective element that protects its loss.

Features:

1. Fully waterproof

2. Sufficient roomy to secure several things while swimming

3. Very convenient and handy solution for securing a few moisture-sensitive things tkj. matches, documents, lighter, cigarettes, float, hooks, stoppers, weights, knife, skylights and more

*PVC Repair Patch for Pontoon

PVC Patch Repair Patch to Stick to Tarpaulin Pool Kayak Pontoon

available COLOR PATCHES:

• mix green grey black

Patch made of exactly the same material from which professional inflatables are made.

Features:

1. Made of 5 layers of good quality PVC, strong, waterproof, safe and durable.

2. Resistant to mechanical, chemical and thermal damage.

3. Easy to apply, you can cut it to a smaller size as needed.

4. 6 patches per pack, enough to fix many things.

5. Perfect fit for Bark, Kolibri, Pro Marine, Zodiac, Bush and other inflatables as well as tarpaulins for trucks, inflatable rafts, swimming pools, toys, etc.

*Reinforcement mesh

Reinforcement mesh with a length of 20 cm and a width of 5 cm.

Used to strengthen or repair together with liquid PVC Patch, Liquid PVC Ulow, Dr. Boat inflatables adhesive, etc.

We recommend using this mesh when repairing slits or holes over 2 cm.

Method of application:

1) Clean and grease the damaged area.

2) Apply the grid.

3) Apply a layer of liquid PVC in advance.

It is important to apply liquid PVC at least 1 cm wider than the edges of the mesh on each side.

You should also wait a few hours after repair before using the equipment we repair.

The mesh will form a uniform layer with liquid PVC and the repaired place will be strengthened to a degree exceeding the original strength of the equipment.

INSTRUCTION

Variation with patch:

Degrease thoroughly glued surfaces. Lubricate the patch and glued object with a thin layer of glue. We apply the patch to the glued object and press it down and hold it for 1 min. The minimum drying time is 6 hours but it is best to wait 24 hours.

Variant without summer:

Degrease the damaged area.

The glued object should be protected from movement.

Lubricate the damaged area with a thick layer on the surface 1 cm larger than the damage.

We wait 20 minutes.

We put on a second thick layer.

After 5 hours, we remove the protection against movement and after 24 hours the glued object can be used.

We prepare a net 2 cm larger than the damage. We thoroughly degrease the surface. Apply glue to the damaged area and push it into the mesh. After 20 minutes, apply the adhesive again on a surface 1,5 cm larger than the previous layer. Glued place achieves sufficient strength after 24 hours

DR.BOAT - is a product that is able to remove virtually any defect caused to the PVC tissue product at a molecular level.

· High adhesion

· UV resistant

· Vulcanization (monolith with product)

· Flexible

· The original properties of the material base are preserved

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Manufacturer code	6753520PD
Parametry	Model	ZESTAW NAPRAWCZY
Parametry	Brand	Dr. Boat
Parametry	Kind	repair accessory
Parametry	For	pontoons and boats