Ratų valiklis KiurLab RH+, 1 l, stabdžių dulkių šalinimui

Trumpai apie prekę

Prekė: Ratų valiklis KiurLab RH+, 1 l, stabdžių dulkių šalinimui. Kategorija: Ratų valikliai.

• Gamintojas: Kiurlab

THE DETAILING PROTOCOL TEAM RECOMMENDS AND OFFERS FOR SALE:

RH+ Deironizer – Advanced Rim Cleaning Deironizer

Deironizer RH+ is a special type of cleaner that is designed to remove metallic contaminants from the surface of rims and car brake system components. Iron and its impurities (e.g. metallic dust resulting from abrasion of brake discs) often appear on rims as small dots or dirt that are difficult to remove using ordinary cleaning agents. Deironizer for rims RH+ works by chemically dissolving and removing these impurities, which allows you to get clean and shiny rims.

Deironizer RH+ KiurLab is a specialized preparation for effective removal of bothersome dirt of metallic origin from alloy wheels and varnished wheels. It also helps to remove these dirt from the external surfaces of the braking system. Our preparation for cleaning rims works using the phenomenon of deironization. During dissolution of metal residues (e.g. iron filings or very fine volatile rust deposits) there is a so-called effect. bleeding rim. Under the influence of liquid, they color in a characteristic red color.

Advantages of Deironizer KiurLab

• fast running time – the product begins to “bleed” after just a few seconds
• perfect consistency – has a slightly gel consistency, thanks to which it applies well and lasts long enough on the cleaned surface
• active cleaners – RH+ bleeding rim preparation binds metallic impurities, dissolves typical dirt and deeply penetrates the pores of the cleaned surface, thanks to which it ensures the highest quality and effectiveness
• longer drying time – under the right conditions, the product can lie on the cleaned surface for up to several minutes, making it easier and safer to remove

How to use RH+ KiurLab Deironer?

Deironizer for RH+ rims is a powerful chemical with a specialized application. It should always be used according to the instructions. When working, take care of good ventilation in the room, always use gloves, mask and safety glasses.

Recommendations before use:

1. Make sure the cleaned surface is cold
2. Shake the bottle to mix the contents
3. Check the operation of the agent on an invisible element of the cleaned surface to eliminate the risk of damage to the rim or other part of the car

How to use RH+ KiurLab Deironizer

1. Spray the preparation on the rim from a distance of about 10 cm
2. In case of strong dirt or hard-to-reach places, spread the preparation using a brush or brush
3. Wait a few minutes until the “bleeding” effect appears
4. Rinse the preparation with cold water under high pressure
5. Repeat the action if necessary

Specifications