PVC klijų sandariklis BREMS, pripučiamoms valčių čiužiniams, 40 ml

Trumpai apie prekę

Prekė: PVC klijų sandariklis BREMS, pripučiamoms valčių čiužiniams, 40 ml. Kategorija: Priedai.

• Gamintojas: no brand
• Modelis: Liquid PVC
• Svoris: 0.4 kg

Suitable for sealing all products made of PVC, e.g. inflatables, tents, swimming pools, inflatable mattresses, water toys.

• For small cavities it is enough to pour them with a small amount of glue. If the defect is larger it should be sewn together and the resulting seam should be poured with glue.
• In order for the adhesive to concentrate properly, it is necessary to wait at least 24 hours, but the maximum strength reaches after up to 3 days - depending on the size of the repaired damage.
• one layer of glue should be applied to the cavity - applying the second may cause dissolution of the previous one.
• The patch is applied to an uninflated object, to a degreased surface.

Liquid patch is the best solution for repairs outside the home, in any conditions. Unlike standard repair kits and patches, you do not need any additional equipment such as adhesives, patches or a device for welding them. It blends very well into the repaired material without standing out against its background like standard patches.

Liquid patch after freezing retains the properties of PVC material - it is flexible, resistant to UV radiation, negative temperatures

Color -Clear

Pack of 40g

Glue sealant resistant to fresh and salt water

The product is designed to repair and seal punctures and small incisions in inflatable products: inflatables, kayaks, boards, swimming pools, trampolines and tents and awnings in tourism or at home without the need for other materials, i.e. Patch.

Repair on uninflated items.

Application:

1. The surface at the puncture or intersection site should be dry, clean and degreased with technical acetone. PVC products can be worked with immediately, and in the case of rubberized fabrics, a layer of rubber should be removed up to the cord or wire at the repair site with e.g. sandpaper.

2. If the cut is too large (longer than 3 cm), first sew the edges of the fabric with thread or apply reinforced mesh.

3. Apply a layer of glue-sealer to the puncture site, covering small areas of fabric around the damage (not less than 10 mm). Allow to dry for 15 to 30 minutes (depending on air temperature).

4. Reapply a thick layer of glue and let it dry for 3-4 hours.

Full strength and hardness of the product is obtained after 24 hours.

Recommendation: Do not use for repairing polyethylene and polypropylene products.

Keep away from fire. Keep away from children.

Repairs should be made at temperatures above +10°C.

Transport and store at - 10°C to +30°C.

Composition: Polyurethanes with linear structure, ketones, esters.

NOTE!! Use in well-ventilated areas or outdoors.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Manufacturer code	BREMS
Parametry	Model	Liquid PVC
Parametry	Brand	no brand
Parametry	Kind	repair accessory
Parametry	For	pontoons and boats
Parametry	Weight	0.4 kg
Parametry	Product weight with unit packaging	0.4 kg
Parametry	Packaging status	original