Putų purkštuvas, tinkavimo slėginis plovimo įrenginys su antgaliais

Trumpai apie prekę

Prekė: Putų purkštuvas, tinkavimo slėginis plovimo įrenginys su antgaliais. Kategorija: Aukšto slėgio plovyklos.

• Gamintojas: Agrekom
• Modelis: Agrekom Agregat Tynkarski
• Įtampa: 230 V

Enter the number. offers in Allegro search engine: 16149150620

The set is designed to apply:

✅ Facade plasters (acrylic, silicate, silicone, mineral – so-called. structural plasters / “lambs”)

✅ Gypsum smoothing (traditional, light, reinforced)

✅ Plastering cover (cement-limestone spray)

✅ All dense emulsions and varnishes (acrylic, latex, emulsion, primer, alkyd, epoxy, polyurethane, vinyl, synthetic, chlorinated rubber paints) and spray wallpapers

✅ Impregnations for wood, fire retardant protection, priming agents and antifungal preparations, impregnating oils (anti-adhesive) for formwork boards

Pressure vessel Agrekom

✅ Capacity: 35 l (50 to 70 kg material weight)

✅ Lower outlet: yes

✅ Conical bottom: yes

✅ Maximum working pressure: 8 bar

✅ Material feeding range (max): 15 m

✅ Weight: 27 kg

✅ Production of the tank is carried out under the supervision of the notified body TÜV Rheinland Industrie (declaration of conformity 0035) in terms of compliance with the PED 2014/68/EU

The AGT-10 plaster gun is designed for spraying:

✅ Acrylic, silicate, silicone and mineral plasters (so-called. structural plasters / “lambs”)

✅ Gypsum smoothing (traditional, light, reinforced)

✅ Adhesives for mesh used in insulation

✅ Plastering cover (spray)

✅ Spray wallpaper (acrylic, latex, silicone, mineral, structural)

✅ Vaccinated soil

Specification:

✔ Spray width: 20 cm

✔ Spire: 2,0 mm

✔ Nozzle size: 4, 6, 8 (mm)

The AGM-10 paint gun is designed for spraying:

✅ Latex, emulsion and primer paints

✅ Priming agents

✅ All dense emulsions and varnishes (acrylic, alkyd, epoxy, polyurethane, vinyl, synthetic, chlorinated rubber paints)

✅ Fireproof protection, soils and antifungal preparations

✅ Impregnation (anti-adhesive) oils for formwork boards

Specification:

✔ Spray width: 20 cm

✔ Air flow regulation: not

✔ Spray width adjustment: not

✔ Nozzle: 2,5 mm

Key Advantages of the Plastering Set:

✅ 1. Precise Pressure Regulation

Independent pressure regulation at the spray gun (right regulator knob) and in the tank (left knob) allows you to precisely adjust the settings for any type of material. The pressure gauges with rubber collars are resistant to damage, and the specially designed quick connector enables quick and convenient connection of the air hose without pressure loss.

✅ 2. Venting

The silencer allows for quiet and rapid pressure reduction in the tank after work is completed.

✅3. Stability and Mobility

Rubber wheels effectively absorb shocks and dampen noise, making it comfortable and quiet to move the unit over uneven surfaces. Two front swivel wheels facilitate maneuvering, and the lock applied to them prevents uncontrolled movement. Larger rear wheels further enhance stability and make moving the tank easy and convenient.

✅ 4. Full Material Utilization

The use of a conical bottom allows for complete utilization of the material inside the tank. Even thick materials flow freely from the tank to the material hose.

✅ 5. Convenient Cleaning

The bottom outlet of the tank can be easily removed, making cleaning quick and convenient. The  swivel joint used in the outlet provides complete freedom of movement and allows for convenient connection of the material hose.

✅ 6. Easy Servicing

The specially designed ball valve mounted in the bottom outlet of the tank can be easily unscrewed, which greatly speeds up servicing and cleaning after work.

Set Contents:

✔ 35L (8BAR) certified pressure vessel with lower outlet and double pressure reducer

✔ AGT-10 plaster gun with 4, 6 and 8 mm nozzle set

✔ AGM-10 paint gun

✔ 5-meter material cable for plaster gun

✔ 5-meter material cable for paint gun

✔ 5-meter air hose for pistols

✔ Cleaning ball for material wire

✳ Optionally, it is possible to increase the length of wires for individual guns to 10 or 15 m

✳ Possibility to increase the length of cables to 15 m with tanks: 35, 60, 110 l

Possibility of any configuration of the set

✳ Our offer includes a wide range of aggregates with different capacities and equipment configurations, adapted to many applications – from spraying and bleaching, through painting, to the application of gypsum plaster, adhesives, putty and waterproofing. We encourage you to visit the other auctions and get acquainted with the full offer.

The Agrekom® unit is a pneumatic device powered by compressed air.

❗ ❗ ❗ An air compressor is required for the proper operation of the unit (not part of the kit), meeting the following requirements:

✅ 2 pistons

✅ Effective capacity: 300 l/min

✅ Minimum tank capacity: 50 l

We recommend buying a Torpeda® compressor

✳ To find our offer, simply enter the number in the Allegro search engine: 11351558909

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Agrekom
Parametry	Model	Agrekom Agregat Tynkarski
Parametry	Operating pressure	12.5 bar
Parametry	Maximum power	200 W
Parametry	Supply voltage	230 V
Parametry	Manufacturer code	tynk-dw-pro110-myjki
Parametry	EAN (GTIN)	5906857264471