Pusiau automatinis suvirinimo aparatas SKANDI KRAFT MIG 220 3in1 Synergy 200A

Trumpai apie prekę

Prekė: Pusiau automatinis suvirinimo aparatas SKANDI KRAFT MIG 220 3in1 Synergy 200A. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: SKANDI KRAFT
• Modelis: iTECH MIG 220
• Ilgis: 480 mm
• Plotis: 210 mm
• Aukštis: 380 mm

Manufacturer: SKANDI KRAFT ║ Welding methods: MIG/MAG, MMA, FLUX, TIG LIFT, SOLDERING, SPOT (Point welding)║ Power supply: 230V ║ Welding current: 200A ║ Efficiency: 60% at 40℃

WHY SKANDI KRAFT iTech MIG 220 Dual Pulse Synergy?

• 3in1 welder: MIG/MAG, MMA, TIG Lift
• Efficiency 60% at welding current 200A at 40℃
• Welding with Pulse and Dual Pulse
• 2T/4T mode
• Single and double pulse welding
• SYNERGY - a huge number of programs
• CUSI3 soldering !
• Regulation of inductance
• Welds well aluminumand its alloys, acid and stainless steel
• The best equipment for locksmith, repair, production, bodywork plants.
• Perfect quality and appearance of the weld
• Color display LCD
• Selection of electrode in MMA mode
• Function: Hot Start, VRD, additionally adjust ARC STRENGTH!

CHECK WHAT OTHER FUNCTIONS THE MIG 220 DUAL PULSE SYNERGY HAS

• Made in IGBT technology
• The highest production standard
• Resistant to interference, power drops
• Cooled with efficient fan
• Less energy consumption compared to welding machines of this class
• Synergy for welding aluminum!
• Digital control - the latest, proven technology
• HOT START
• ARC FORCE
• Solid and proven housing
• Self-shielding wire welding - FLUX

• PULSE and DUAL PULSE - more quality welding: ✅
• FAN STOP turning off the fan at rest: ✅
• Lutowelding : ✅
• Connector for quick connection of gas hose (TYPE 21): ✅
• Gas heater connector 36 V: ✅
• SPOOL GUN - possibility of connecting an external handle with a wire feeder: ✅
• VRD - voltage reduction and safety improvement: ✅
• Arc Force - welding arc length adjustment: ✅
• Hot Start - fast arc glow: ✅
• Anti Stick - prevents the electrode from sticking: ✅
• Memory Channels: 18
• IGBT - built of transistors that are characterized by high efficiency: ✅
• Convenient knobs and a clear panel for quick setting of the welding machine, even with welding gloves: ✅

Physical parameters

• Length x width x height: 48 × 21 × 38 [cm]
• Weight: welding machine [net] 14.6 [kg]
• Housing protection: IP21S
• Cooling: fan

SPOT (Point welding) - spot welding by MIG/MAG method. Function mainly used for joining sheet metal "on tab" or pre-connecting structure

• Precision and control: Allows for accurate placement of welding points, which is crucial for precise designs.
• Efficiency: Fast spot welding process reduces production time and costs.
• Minimum deformation: Thanks to the short duration of heat action on the material, the risk of deformation is reduced, which is important when working with thin sheets.

WHAT DO WE GAIN BY CHOOSING A DOUBLE PULSE WELDING MACHINE?

• Excellent quality spoiny even at high efficiency
• The welder produces two currents, between which it jumps - this translates into the right shape of the weld
• Increased efficiency compared to TIG method
• High level appearance lica - scale effect
• Automatic feed wire - improves performance
• Lower cost of work
• Regulation outflow gas before and after welding

• Marcin S.: "I have been using Skandi Kraft iTech mig 220 for several months now and I am very satisfied. Great choice for the money! "
• Matthew. : "As a beginner welder, I was looking for something easy to use but versatile at the same time. 220 met all my expectations. The spot welding function is irreplaceable for minor repairs. "
• Tomasz P.: "I work with different materials and this welding machine is doing well! "
• Krzysztof M.: "Skandi Kraft iTech mig 220 is a solid welding machine. "
• Ewa Z.: "Welder bought for her husband for his 40th birthday. A very good gift. "

• Fully Copper Wires: SKANDI KRAFT welding machines are equipped with mass and supply cables made of 100% pure copper. Thanks to this, they provide maximum conductivity, which translates into better performance and reliability during welding. In the devices of competing brands, we get copper-plated aluminum, which has lower conductivity, shorter service life and such wires have much greater energy losses.
• S-2T: Operating mode two-bar with hot start function, which is useful when welding materials requiring preheating.
• S-4T: Operating mode four-bar with hot start function, also useful for welding materials requiring preheating.
• IGBT: The welder uses state-of-the-art IGBT transistors, which minimizes electromagnetic interference and power losses while increasing the efficiency and reliability of the power source.
• 2T/4T: In two-bar (2T) mode, after pressing and holding the button, the welding process begins, and after its release, the welding stops. In four-bar (4T) mode, after the first press and release of the button, welding begins, and after pressing again, welding is completed. This is a more convenient solution for longer welds.
• Full Synergy: Advanced electronic control microprocessor, which automatically selects operating parameters depending on the diameter of the wire, type and thickness of the material.
• Connection for Gas Heater AC36V: device equipped with a special connector for gas heater. The use of a heated reducer ensures gas pressure stability, protects the reducer against freezing and damage, improving welding quality and extending the service life of the equipment.
• Spoolgun: The device has a plug that allows you to connect the spoolgun handle. The spoolgun handle is used in the welding process to feed the welding wire directly from a small spool mounted on the handle. The most common use of such a handle is welding aluminium or welding in hard-to-reach places.

• Welding machine SKANDI KRAFT iTECH MIG 220 with integrated power cable with a length of 3 meters and cross-section 3x2.5 [mm2]
• MIG KD24 welding torch type MB24 4 meters with Teflon-graphite insert
• Additional steel insert blue 4 meters for KD24 handle, for wire welding with diameter 0.6 -1.0 [mm]
• Mass holder fully copper 3 meters, cross section 25 [mm2]
• Copper electrode holder 3 meters, cross section 25 [mm2]
• Wire rollers: for steel 2x 0.8-1.0 V, for aluminium 2x 1.0-1.2 U
• Wire feeder roll size: 22/10/30 [mm]
• Gas cylinder mounting elements: 2 x gas reducer mounting band, 2-meter gas hose, key, allen
• Current terminals for KD24, MB24 (1 x 0.8 ; 1 x 1.0 ; 1 x 1.0 AL ; 1 x 1.2 AL)
• Instruction

POWER SUPPLY PARAMETERS:

• Power supply: 230 V
• Frequency: 50/60 Hz
• Idle Voltage: 68 V
• Network security: 20 A

TECHNICAL PARAMETERS

MIG efficiency (for temp. 40°C):

• 60%/ 200 A/24 V
• 100%/ 155 A/21.8 V

• MIG welding current: 40*-200 A
• MIG welding voltage: 16-24 V

TIG efficiency (for temp. 40°C):

• 60%/ 200 A/18 V
• 100%/ 155 A/16.2 V

• TIG welding current: 10-200 A
• TIG welding voltage: 10.4- 18 V

MMA efficiency (for temp. 40°C):

• 60%/ 200 A/28 V
• 100%/ 155 A/26.2 V

• MMA welding voltage: 21.2-28 V
• MMA welding current: 30 - 200 A

*average parameter min. current 19 [A]

SPOT:

• Gas before ignition: 0-2 [s]
• Spot welding ON: 0.1-20 [s]
• Spot welding OFF: 0.1-20 [s]
• Gas after expiration: 0.5-10 [s]

S_2T/S_4T:

• Gas before ignition: 0-2 [s]
• Starting current: 1.5-15 [m/min]
• Rising time: 0.1-15 [s]
• Falling time: 0.1-25 [s]
• Final current: 1.5-5.4 [s]
• Gas after expiration: 0.5-10 [s]

Specifications