Pusiau automatinis suvirinimo aparatas MIG/MMA Dnipro-M MG-16DX

Trumpai apie prekę

Prekė: Pusiau automatinis suvirinimo aparatas MIG/MMA Dnipro-M MG-16DX. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Dnipro-M
• Modelis: 80626011
• Ilgis: 422 mm
• Plotis: 192 mm
• Aukštis: 290 mm

Semi-automatic welding machine Dnipro-M MG-16DX

Dnipro-M MG-16DX is an inverter semi-automatic welding machine for wire and electrode welding. It will work well in the workshop, garage, service, farm and assembly work, where one device is needed for various welding methods.

The model supports MIG/MAG, MMA and TIG Lift, has a current range of 20 – 160 A, works with 0,6 – 0,8 mm wire and 1,6 – 4 mm electrodes. Thanks to the Hot Start, Anti Stick and Arc Force functions, the device facilitates arcing, reduces electrode sticking and improves work stability.

The set includes a semi-automatic MG-16DX, welding torch with eurodisconnector, cable with electro-holder 3 m, mass cable 2,5 m, hose for gas connection, contact tips, special key, user manual and packaging.

Why choose Dnipro-M MG-16DX?

✓ MIG/MAG, MMA and TIG Lift — several welding methods in one device

✓ Scope 20 to 160 A for home, workshop and assembly work

✓ 0,6 – 0,8 mm wire for semi-automatic welding

✓ Electrodes 1,6 to 4 mm for MMA welding

✓ Working cycle 50% MIG/MAG at maximum current and 40°C

✓ Hot Start, Anti Stick and Arc Force facilitate stable electrode welding

✓ Working with gas shielded wire or self-shielded wire after polarity change

✓ Weight 8,1 kg and transport handle make it easy to carry the device

Technical data

• Model: MG-16DX
• Type: semi-automatic inverter welding machine
• Welding methods: MIG/MAG, MMA, TIG Lift
• Supply Voltage: 230 V
• Frequency: 50 Hz
• Rated current consumption: 28 A
• Minimum voltage without loss of efficiency: 170 V
• Maximum active power: 4,7 kW
• Maximum power consumption: 5,9 kVA
• Idle Voltage: 55 V
• Arc glow voltage: 55 V
• Current adjustment range MIG/MMA/Lift TIG: 20 – 160 A
• Welding wire diameter: 0,6 – 0,8 mm
• Wire feed speed: 2 to 15 m/min
• Welding electrode diameter: 1,6 – 4 mm
• MIG/MAG duty cycle at max. current: 50% at 40°C
• MMA work cycle at max. current: 33% at 40°C
• Efficiency: 88%
• Cooling: forced air
• Reel size: up to Ø 200 mm
• Insulation Class: F
• Degree of protection: IP21S
• Dimensions: 422 × 192 × 290 mm
• Weight: 8,1 kg

Functions: MIG/MAG welding, MMA welding, TIG Lift welding, gas shielded wire welding, self-shielded wire welding, welding current adjustment, wire feed adjustment, Hot Start, Anti Stick, Arc Force, overheating protection, forced cooling, polarity change.

Set: semi-automatic welding machine Dnipro-M MG-16DX, cable with electro-holder 3 m, mass cable with clamp 2,5 m, hose for gas connection, 2 clamps for gas hose, special wrench for replacement of tips, 2 contact tips, welding torch with euroconnector, user manual, packaging.

Welding modes and quick setup

MG-16DX allows welding in semi-automatic MIG/MAG mode and MMA coated electrode. In addition, it supports TIG Lift, i.e. arc ignition by touch using the appropriate TIG handle.

In MIG/MAG mode, the device can work with copper wire in a gas shield or with self-shielding wire without connecting the cylinder. Just choose the right wire and set the polarity according to the instructions.

The current range of 20 – 160 A allows you to adjust the parameters to the thickness of the material, the type of wire or electrode and the nature of the work. Smooth adjustment helps to position the device for both thinner components and stronger connections.

The wire drag button makes it easy to get the machine ready for work – it speeds up the wire feeding through the handle and reduces the time it takes to set up the semi-automatic before welding.

Arch stability, cooling and working comfort

Hot Start makes it easier to light an arc when welding MMA, Anti Stick reduces electrode sticking, and Arc Force helps maintain a stable arc during operation. This is especially important for people who want to start welding faster without complicated settings.

Forced air cooling and increased perforation of the housing help dissipate heat during operation. Overheating protection protects the device under greater load.

Two displays and knobs on the front panel make it easy to control settings. The transport handle allows you to conveniently move the welding machine between workstations.

MIG holder with euroconnector, 3 m electrode cable and 2,5 m mass cable give a convenient range when working at the welding table, structure, gate, fence or steel elements.

Application

Semi-automatic welding machine Dnipro-M MG-16DX is suitable for:

• welding of alloy and non-alloy steel;
• welding stainless steel with appropriate wire or electrode;
• workshop, garage and assembly works;
• repairs of metal structures, profiles, gates and fences;
• MIG/MAG welding in gas shield;
• self-shielding wire welding without cylinders;
• MMA electrode welding 1,6 – 4 mm;
• works for beginners and users who want a simpler semi-automatic setup.

You buy in the official store of the manufacturer Dnipro-M - you can be sure of the original product, consistent with the manufacturer's data and intended for real work.

Specifications