Pusiau automatinis suvirinimo aparatas FANMIG J5 MOST

Trumpai apie prekę

Prekė: Pusiau automatinis suvirinimo aparatas FANMIG J5 MOST. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: MOST
• Modelis: 5100020190
• Ilgis: 440 mm
• Plotis: 180 mm
• Aukštis: 350 mm

Product characteristics:

• Higher welding current than similar, traditional semi-automatics powered from the 230V mains
• Very good welding properties in both MAG and MMA methods
• Possibility of TIG DC welding with arc ignition by rubbing
• Display of welding current and set parameters
• Eurosocket for connecting any MIG/MAG holder
• Typical mass socket (35/50)
• Low weight of only 9,2 kg thanks to the use of an inverter power source
• Quiet fan
• Proven brand MOST
• Control panel shows all the basic functions of the device
• Function button allows you to switch between arc length correction, resistance and wire diameter
• Selection of welding methods: MIG/MAG; TIG DC with ignition by rubbing or MMA electrode (STICK)
• Ad hoc wire feeding button
• VRD voltage activation for electrode welding, 2-bar or 4-bar operation for MIG/MAG welding torch

Technical data:

• Power supply and tolerance: 1x230/50-60/ +/-15% V/Hz
• Welding Current Range: 30-200A (MIG/MAG), 10-160A (MMA), 10-180A (TIG)
• Idle Voltage: 60A
• Network security: 16A immediate
• Normal power consumption: 7,7kVA (MMA), 4,3kVA (MIG/MAG)
• Current and eff: 19,6A (MMA); 22,3A (MIG/MAG)
• Current I 1max: 31A (MMA); 35,2A (MIG/MAG)
• MIG/MAG duty cycle: 2000A/24V/40%; 130A/20,5V/100%
• MMA duty cycle: 160A/26,4V/40%; 100A/24,0V/100%
• Wire feed speed: 2-11,5m/min
• Insulation Class: F
• Protection Class: IP21S
• Wire Feeder Type: 2-Roll
• Dimensions: 440x180x350mm
• Weight: 9,2kg

Basic equipment:

• Bulk cable
• Gas line
• 0,8-1mm Steel Wire Rolls (Assumed in Wire Feeder)

Specifications