Pusautomačis suvirinimo aparatas MIG MAG Magnum 200/2 Migomat 200A 230/400 3

Trumpai apie prekę

Prekė: Pusautomačis suvirinimo aparatas MIG MAG Magnum 200/2 Migomat 200A 230/400 3. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: magnum 200/2
• Ilgis: 651 mm
• Plotis: 326 mm
• Aukštis: 457 mm

Manufacturer: MAGNUM ║ Welding methods: MIG/MAG, MMA, FLUX ║ Power supply: 230V/400V ║ Welding current: 200A ║ Efficiency: 60%

• Semi-automatic welding machine MAGNUM MIG 200/2 MMA 230/400V
• MIG MB 15 torch, length 3m
• Electrode holder
• Mass holder
• 400/230V adapter

✔ New 8l MIX ARG/CO2 cylinder with 10-year legalization and a protective cap for its transportation (cylinders can be filled at any point selling technical gases) 150BAR cylinders

✔ Welding wire 0.8/5 kg good quality!!!!

✔ Electrodes 1kg pack

✔ 2-clock regulator showing the amount of remaining gas and gas flow during welding.

✔ Connecting hose to the cylinder and reducer.

✔ Flame-retardant MIG welding gloves

✔ Welding angle

✔ OPN - anti-splinter preparation

✔ 2 MB 15 nozzles for MIG gun

✔ 5 MB 15 tips for MIG gun

✔ 1 gas connector for MIG torch

✔ 2 cable ties

⚙ Power supply: 230V/400V/50Hz

⚙ Welding Current: 200A

⚙ Efficiency: 60%

⚙ Adjustment range: liquid

⚙ Welding without gas: Yes

⚙ Reel weights used: 1-5kg

⚙ Wire diameter: 0,6/0,8/1,0

⚙ Housing protection: IP21S

⚙ Power protection: 20A

⚙ Cooling: fan

⚙ Idle voltage: 57V

⚙ Inductance regulation: Yes

MIG 200/2 MMA KN is a semi-automatic welding machine designed for welding low carbon steel, low alloy steel (MAG), alloy steel (MIG), aluminum and its alloys and has the possibility of welding with wrapped electrodes (rutile, alkaline, acidic - MMA). This device is used in locksmith workshops as well as in repair workshops. It enables welding with steel welding wires with a diameter of 0,6-1.0 mm, as well as self-shielding wires (welding "without gas") and electrodes with a diameter of 1,6-4.0 mm. MIG 200 MMA KN is a device adapted to power from a single-phase 230 V and three-phase 400V network. This device is equipped with an overload uthermal protection system, preventing excessive overheating.

⭐️The device can weld with 200A current at 60% duty cycle, which means the device will not overheat during long welding sessions.

⭐️ The initial welding current starts from 30 A, this low current allows welding of thin car body sheets.

⭐️ Ability to connect the device to a 230V or 400V power supply.

⭐️ Suitable for household use.

⭐️ Ability to weld aluminum.

⭐️Brazing Function - ability to weld galvanized car body sheets without burning the zinc coating, using CUSI copper-based wire.

⭐️ Magnum MIG 200/2 has an MMA electrode welding function, a traditional welding method.

⭐️ Polarity reversal function useful for using self-shielding wire, which is used for welding outdoors with the FLUX method - welding without gas.

⭐️ Chassis for gas cylinder.

⭐️ EURO Socket

⭐️ Metal, solid wire feeder

⭐️ Ability to weld with 0.6mm, 0.8mm, 1.0mm wires

Specifications