Lieferzeit in ganz Litauen: 5-10 Werktage
Lieferpreis an die angegebene Adresse: 3 Euro
Trumpai apie prekę
Prekė: Pavėsinė DAS 560 S, 3x4 m, sodo ir vakarėlių palapinė. Kategorija: Paviljonai ir palapinės.
- Gamintojas: Das Company
- Modelis: Namiot Weselny Pawilon 3x4
- Ilgis: 4 m
- Plotis: 3 m
- Aukštis: 2.87 m
- Spalva: multicolor
Summer construction Summer
- Material steel galvanized
- Corrosion protection with zinc
- Diameter of structural pipes approx. 38mm
- Thickness of structural pipes approx. 1.2mm
- Diameter of connectors approx. 42mm
- Thickness of connectors approx. 1.3mm
- Mounting screws passing through
- Stable feet 6 x 9 cm
white, white-grey, white-green, white-blue, white-red, gray-white, gray-green, gray-blue, gray-red
Please indicate the selected color in the message to the seller during the purchase
DĖMESIO!!! Jei nepasirinksite spalvos, ji bus parinkta atsitiktinai.
The design is solid and easy to assemble. Thanks to this, in addition to the quick folding, the tent can be easily moved to any place.
1. New Slide & Roll system. Each of the entrances has three locks, dividing it into two independent segments, which can be expanded sideways or rolled upwards. This allowed one person to open the entrance.
2. The Over Top system increases entry. Thanks to the use of a special indentation in the roof, we obtain HIGHER ENTRY than the side wall.
Each entry has three locks, dividing it into two independent segments
This allows you to:
1. Extend one part.
2. Extend the entrance both ways.
3. Roll up one part or the whole.
4. Get an entry with full tent width.
1 - Roof SD PVC (polyvinyl chloride) approx. 560 g/m² 2 - Double ventilation on both sides 3 -Entry type Slide & Roll 4 - Strong YKK locks at 5 -Sealing strips 6 - Interchangeable Maskers with sealing Velcro 7 -Side walls SD PVC 2 x 2 m (polyvinyl chloride) 500 g/m² -Mosquito net 140 x 130 cm 8 - Additional retention apron
It is possible to connect tents in any way. You can put them next to each other or using a special gutter - one after the other. The gutter will not only connect the tents, but also seal the tarpaulin and prevent water, dust and other dust from getting inside. Thanks to the gutter, you will gain more usable space of the tent in a safe and simple way.
Tents are composed of modules with a length of 2, 4, 6, 8, 10 or 12 m and 1, 2-meter extensions.
Innovative technology of material production
1. PVC layer
2. Mesh embedded between PVC layers
3. PVC layer
4. Lacquer layer
Tarpaulin with a thick material guarantees tightness and durability. It is resistant to UV rays and temperature fluctuations. Provides water resistance and prevents water condensation.
Tear strength: 2400/2300 N/5 cm
Tear strength: 250 N
Temperature range: -40°C to +60°C
ATTENTION!
The PVC sheathing we use (polyvinyl chloride) is much stronger than polyester.
Air Control system
On both sides of the roof there are double vents with rolled shutters. This allows you to maintain proper air circulation. Thanks to this, inside the tent no sauna effect is created, and water should not condense on the walls .
Hermetic system
Each piece of plating has sewn Velcro, which ensures their optimal fit. In addition to affecting the great aesthetics, Velcro guarantees the tightness of the tent against: dust, dust or cold air.
Placed on the side walls of the additional retention apron, it ensures effective draining of water outside during rainfall. This guarantees protection against puddles in the middle of the tent.
The tent has sealing grilles, mounted on Velcro. They are available in different color variants. This allows you to quickly and easily change the color of the tent.
- Red
- White
- Green
- Gray
- Blue
Detalinė informacija apie spalvų prieinamumą Pristatymo ir Apmokėjimo skiltyje
ATTENTION!
Vienai palapinei gali būti keli grotų spalvos variantai.
Pavyzdinis pranešimas pardavėjui:
- "Prašau atsiųsti žalią spalvos groteles."
- "Prašau atsiųsti groteles spalvomis: 5 žalia, 4 raudona ir 1 mėlyna"
Įėjimai ir šoninės sienos (kiekviena apie 2 m ilgio) yra atskiros sekcijos, montuojamos su specialiais montavimo gumučiais - taip galite sukurti bet kokias palapinės išsidėstymo konfigūracijas.
Pavyzdiniai konfigūravimai nuotraukoje:
1. Uždaryti pagrindiniai įėjimai/įėjimai ir atskirta viena siena palapinės viduryje.
2. Uždaryti pagrindiniai įėjimai/įėjimai ir atskirtos dvi sienos palapinės viduryje.
3. Atidaryti pagrindiniai įėjimai/įėjimai ir atskirtos visos sienos palapinės vienoje pusėje.
4. Išmontuoti pagrindiniai įėjimai/įėjimai ir visos palapinės sienos.
ATTENTION!
5-6. Paveikslėlyje rodomos, kad galite pakelti šonines sienas. Tai nėra įtraukta, galite įsigyti kituose aukcionuose.
Jūs galite užsakyti atskirus plokščių elementus skirtingais variantais:
1. Siena su langais
2. Visos sienos
3. Sienos su musės tinklu ir užuolaidomis
4. Bet koks sienų mišinys
Pavyzdinis pranešimo turinys pirkėjui:
- Prašau man atsiųsti palapinę be langų.
- Prašau man atsiųsti palapinę su: 4