Mobilus žirklinis keltuvas NORMET PX-3500S, 3,5 t, 1,2 m, 400 V

Trumpai apie prekę

Prekė: Mobilus žirklinis keltuvas NORMET PX-3500S, 3,5 t, 1,2 m, 400 V. Kategorija: Žirkliniai keltuvai.

• Gamintojas: Normet
• Modelis: PX-3500S400V

MOBILE SCISSOR LIFT NORMET PX-3500S

The most popular scissor lift for

• Vulcanization workshops
• Mechanical workshops
• Auto Detailing
• Backyard Garages

WITHOUT ANCHORING, YOU WILL PUT IT ON ALMOST ANY PAVED SURFACE

Includes oil pads and mobile kit.

Very quick and easy installation

No need to connect to the compressor!!!

LIFTING HEIGHT UP TO 120cm

Higher than the standard lifting height of up to 120cm allows for more convenient access from the bottom of the vehicle. This is very important if it is to be your main lift in the workshop.

Blocked ramps and up to 220cm range

Thanks to the overrun locking function, you can extend the lift platform up to 220 cm, which gives you the opportunity to lift vehicles with a larger wheelbase.

Blocked raids

On blocked raids, you can put rubber blocks and safely lift the vehicle. Thanks to this, you can adjust the length of the lift by blocking e.g. only front or rear raids and if necessary, even all four.

Low sports cars are a challenge?

Absolutely not for our lift!!!!

Very low minimum height

In the lowest position, the lift is only 11cm high, which gives the opportunity to operate low-hanging sports cars.

If you have an extremely low car and 11 cm is still too much.

Then you can optionally buy ramp extensions that are

available at our other auctions on allegro.

Supporting lift full power from the bottom

Getting on the lift is not everything.

In the lowest position of the lift, the actuator is located almost horizontally and its force is mostly not directed vertically upwards and is directed horizontally, which causes a significant loss of power at the very start. Therefore, our lift has an additional short shear that acts as a lever and allows you to get full power from the very beginning of lifting so low cars are not a challenge

Security is paramount!

Our lift is equipped with a number of different solutions to increase your safety when working with our lift. One of such elements is the leg guard which effectively protects against slipping the foot under the lift.

In addition, during the lowering process, the lift gives a light and sound signal to take special care

Convenience of work is also important

For convenient operation of the lift is a control box equipped with high-quality illuminated metal buttons, a safety switch, a power lamp and a light and sound signal.

In addition, the lift has an emergency lowering valve so that you can leave the lift despite the lack of power.

Electric ratchets

Thanks to the use of electric ratchets, you no longer have to worry about connecting the air, all you need to do is connect to electricity. The special shape of the teeth allows for even better and faster locking. And a double strip with teeth gives twice the safety of standard solutions.

STABILITY

Pdespite up to 120cm of lifting, our lift is very stable because it was based on four slides in each platform and in addition the shears have been reinforced with steel plates, which gives us a very high rigidity of the entire structure.

MOBILE SET

The lift is equipped with a mobile set for easy movement of the lift anywhere.

TECHNICAL DATA :

• Catalog number: PX-3500S
• Total lift [kg]: 3500 kg
• Lifting height max. [mm]: 1200 mm
• Lifting height min. [mm]: 110 mm
• Lifting time [s]: 19 s
• Powered [V]: 230V / 400V
• Engine power [kW]: 2,2 kW
• Type of drive: Hydraulic
• Sync: Fixed
• Ratchet system: Electric
• Width [mm]: 1860
• Length [mm]: 220
• Weight [kg]: 665 kg

Specifications