MIG/MAG suvirinimo aparatas STAHLWERK MIG MAG 200 ST PLUS 200A TIG MMA inverteris

Trumpai apie prekę

Prekė: MIG/MAG suvirinimo aparatas STAHLWERK MIG MAG 200 ST PLUS 200A TIG MMA inverteris. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: STAHLWERK
• Modelis: STAHLWERK MIG MAG 200 ST PLUS
• Ilgis: 480 mm
• Plotis: 210 mm
• Aukštis: 360 mm

STAHLWERK MIG MAG 200 ST PLUS is a professional, technologically advanced semi-automatic welding machine designed for welding using the following methods:

➡ MIG/MAG:

Arc welding in gas shields (CO2 or Argon+CO2) is one of the most commonly used processes for the production of welded structures. The semi-automatic welding process involves melting the edges of the welded object and the welding material (welding wire on a roll) with an electric arc produced between the welding wire fed by the handle and the welded material.

Available Modes:

• MIG SYN - MIG/MAG welding with synergistic settings,
• FLUX / FCAW - self-shielding wire welding. This is a similar welding process as MIG/MAG but does not require a gas cylinder. On the wire there is a thin layer of powder, which at the time of arc formation produces gas covering the working area.

➡ TIG LIFT DC - welding with a non-melting electrode (tungsten) in an inert gas shield (Argon) using an additional handle. In the TIG DC Lift mode, the arc glow occurs when the electrode with the welded element is contacted (the button in the handle does not arc, the gas is connected directly from the reducer to the handle). In TIG Lift DC mode, the current is constant.

➡ MMA - classic welding with wrapped electrodes (rutile, alkaline, acidic).

The STAHLWERK MIG MAG 200 ST PLUS welding machine is used for welding:

✔ low alloy steels (MMA, MIG/MAG, TIG Lift DC),

✔ low carbon steel (MMA, MIG/MAG, TIG Lift DC),

✔ alloy steels (MMA, MIG/MAG, TIG Lift DC),

✔ acid-resistant steels (MMA, MIG/MAG, TIG Lift DC),

✔ aluminium and its alloys (MIG),

✔ other weldable metals and alloys.

The device has been designed for all kinds of welding work in automotive, locksmith, repair, industrial workshops etc.

STAHLWERK MIG MAG 200 ST PLUS has a readable and easy to use function panel, which has m.in.:

• Display screens showing welding voltage and current,
• Welding method selection button: MIG, TIG, MMA,
• Gas shield selection button,
• Selection of diameter of wire used,
• 2 Adjustment knobs and buttons in one.

• ✔ REPAIR WORKSHOPS,
• ✔ AUTOMOTIVE INDUSTRY,
• ✔ LOCKSMITH WORKSHOPS,
• ✔ OF ALL BODYWORK REPAIRS,
• ✔ FACTORIES,
• ✔ FARMS,
• ✔ HOMEWORK,

AND WHEREVER RELIABILITY MATTERS!

✔ SYNERGY - is a very helpful feature available in professional welding equipment class PREMIUM. By setting the appropriate program or entering parameters, the device will independently select most welding settings, such as wire feed speed or appropriate voltage, according to the programmed data.

✔ INVERTER TECHNOLOGY IGBT - is a modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has the effect of significantly extending the reliable operation of welding equipment.

✔ INDUCTANCE ADJUSTMENT - function is useful during welding using the MIG/MAG method of thin elements, preventing them from burning out and soldering galvanized elements. Changing the inductance value also reduces the amount of welding chips during CO2 shielded welding. Depending on the model of the welding machine, the adjustment is automatic or can be adjusted manually.

✔ ANTI-STICK - automatic shutdown of welding current in case of electrode sticking, which facilitates its removal.

✔ HOT START - facilitates the ignition of the electrode by providing more welding current with each arc.

✔ MOBILITY OF THE DEVICE - thanks to the attached transport handle, the welding machine is easy to transport and allows welding in hard-to-reach places.

✔ INTELLIGENT COOLING AND OVERHEATING PROTECTION - state-of-the-art technology, integrated overheating protection and high-performance cooling allow maximum power utilization.

✔ ST-GUARD HOUSING - ergonomic, durable and safe to use. The control panel is easily accessible and intuitive to use.

✔ EUROCONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

✔ SUPERIOR EFFICIENCY AND EFFICIENCY - Single-phase alternating current (230 V) powers the device and provides an output of 200 A.

✔ LED LIGHTING - a special attraction of the welding machine is the integrated LED lighting of the wire guide, which allows quick replacement of the wire spool even in low visibility conditions. It turns on automatically when you open the protective flap.

EFFICIENT OPERATION THANKS TO PROFESSIONAL WIRE FEEDER

The paver is equipped with a professional wire feeder, which guarantees stability and continuity of operation of the device.

The 2-roll feeder allows precise extension of the welding wire excluding its slippage.

The feeder has a quick wire change knob as well as a wire feed roller.

A special highlight is the integrated LED lamp illuminating the housing, which allows quick replacement of the wire spool even in low visibility conditions. The lamp turns on automatically when you open the protective flap.

➡ The device is equipped with overload protection, which increases its reliability.

❄ The device has a fan cooling system which significantly increases its efficiency.

⏩ TECHNICAL DATA:

• Model: STAHLWERK MIG MAG 200 ST Plus welder
• Working cycle (40°C): 15% at 200 A / 60% at 100 A / 100% at 77 A
• Power supply: 1 x 230 V AC (+-15%)
• Network frequency: 50/60 Hz
• Idle voltage: 62 [V]

⏩ MIG PARAMETERS:

• MIG/MAG welding current: 40 - 200 A
• MIG/MAG output current (0,6 / 0,8 / 1,0): 20 - 100 A / 40 - 200 A / 50 - 200 A
• FLUX output current (0,6 / 0,8 / 0,9 - 1,0): 20 - 160 A / 40 - 200 A / 50 - 200 A
• Maximum mains current (I1max): 35 A
• Maximum effective mains current (I1eff): 13,6 A
• Wire feeder: 2-roll
• Wire diameter: 0,6/0,8/0,9/1,0 mm

⏩ MMA AND TIG PARAMETERS:

• Output current MMA/LIFT-TIG: 20 - 200 A
• Maximum mains current (I1max) MMA: 38 A
• Maximum mains current (I1max) TIG: 28 A
• Maximum effective mains current (I1eff) MMA: 14,7 A
• Maximum effective mains current (I1eff) TIG: 10,8 A

⏩ OTHER:

• Protection rating: IP21S
• Weight: 10 kg
• Dimensions L x width x H (mm): 480 x 210 x 360
• Network connection: CEE 7/7 Schuko plugin
• Standards: IEC 60974-1; EN 60974-10 (Class A)
• Certified by: SGS Standards Technical Services Co., Ltd

WHEN YOU BUY FROM US, YOU GET:

• Welder STAHLWERK MIG MAG 200 ST PLUS - 1 pc.
• welding cable MIG MB15 with central connector Euro - 3m - 1 pc.
• Gas connection hose with quick coupler - 5 m - 1 pc.
• mass cable - 1 pc.
• Wire guide rollers 0,8/1,0 mm (one is already pre-assembled) - 2 pcs.
• Gas pressure reducer with quick coupler and O-seal - 1 pc.
• Speedway hammer - 1 pc.
• Wire brush - 1 pc.
• Allen key - 1 pc.
• Mounting key - 1 pc.
• Instruction for use
• Guarantee card

SET OF 1 MIG INDUCTANCE MB15.

M.

Specifications