Medienos frezavimo staklės MAFELL NFU 50 su kreipiančiųjų adapteriais

Trumpai apie prekę

Prekė: Medienos frezavimo staklės MAFELL NFU 50 su kreipiančiųjų adapteriais. Kategorija: Frezavimo staklės.

• Gamintojas: Mafell
• Modelis: 918709
• Įtampa: 230 V

Scope of delivery of the SET:

1. Frame milling machine MAFELL NFU 50

♦ 1 Head for framing, Ø 163 x 60 mm; Cat. no. 091901

♦ 1 NFU-PA Position Indicator

♦ 1 Side guide SA 625; Cat. no. 207183

♦ 1 Parallel guide

♦ 1 Guide L, max. diagonal cutting range 370 mm; cat. no. 208171

♦ 1 Allen wrench SW 6

♦ 1 Torx T 15 Allen Wrench

♦ 1 Power cable 10 m

♦ in a carton

2. Adapters (pair) for parallel guide Mafell 037195

Technical data:

• Nominal voltage: 230 V
• Nominal input: 2300 W
• Depth of milling without rail at 0°: 0 - 50 mm
• Depth of milling with rail at 0°: 0 - 44 mm
• Rotation range: 0 - 45°
• Rated speed without load: 5900 rpm. /min
• Weight with rail: 9,4 kg
• Dimensions (Width x L x H ) with guide rail L: 370 x 810 x 280 mm
• Milling length with guide device L: 370 mm

Technical data

♦ Weight: 0,181 kg

♦ Milling head Ø 163 x 60 mm Mafell 091901

Side guide SA 625 Mafell 207183

♦ Frames at intervals of 62,5 cm can be repeated as many times as necessary, without the need for time-consuming marking.

♦ Guide device L with a maximum cutting length of 370 mm.

♦ Adjustable stop allows cutting at an angle of -60 to +50°.

♦ The two contact cams on the bottom of the rail are simply pressed against the material being processed. After the cut/groove is made, the rail is automatically retracted to the starting position.

♦ Using the L guide with NFU 50, the transverse grooves are made precisely, quickly and easily.

♦ The scale located on the side of the guide allows for very accurate setting of the cutting angle.

♦ Single spigots can be made effortlessly with NFU 50 and L guide.

♦ A special fixed bumper and adjustable stop located on the underside of the guide allow you to make horizontal diagonal cuts from + 50° to - 60°.

♦ For frequently repeated angles, two bumpers can be pre-set on the bottom of the L guide.

What is the best use of NFU 50 Mafell?

♦ Longitudinal and transverse frames

♦ Haircuts

♦ Panels in buildings with Prussian wall, false floors

♦ Inlets at an angle of up to 45°

♦ Spigots

♦ For joining solid wood, slats and wood panels

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Mafell
Parametry	Series	NFU 50
Parametry	Milling machine type	specialized
Parametry	Power supply	mains
Parametry	Supply voltage	230 V
Parametry	Maximum no-load speed	5900 RPM
Parametry	Additional information	dust removal
Parametry	Manufacturer code	918709
Parametry	EAN (GTIN)	4032689267548
Parametry	Packaging status	original