Kolibri pontoninės valtės ratukai

Trumpai apie prekę

Prekė: Kolibri pontoninės valtės ratukai. Kategorija: Priedai.

• Gamintojas: RWW
• Modelis: Light Alu

⭐ ⭐ ⭐ ⭐ ⭐

SET OF TRANSPORT WHEELS FOR SLIPPING/LAUNCHING A PONTOON OR BOAT

⭐ ⭐ ⭐ ⭐ ⭐

✅ Reinforced version with adjustable angle of inclination of raised wheels and with a function that facilitates launching in shallow water.

✅ The construction is extremely durable and lightweight (lighter than metal construction) thanks to the use of reinforced aluminum.

✅ Suitable for boats and all pontoons with transom, e.g. Kolibri, Bark, Eling, Storm, Zodiac, Pro Marine, Kormoran and others. etc. They can be successfully mounted to a unit with a length of over 4m.

✅ CONVENIENT AND SAFE TRANSPORT OF PONTOON/BOAT

✔ Significantly facilitate the movement of the vessel near the water, and its launching.

✔ Wheels allow to transport comfortably and safely pontoon, without much effort alone, without the help of another person.

✔ The large width and appropriate diameter of the wheels mean that properly moving on no ground is a problem.

✅ END OF MISSING PIN PINS

✔ We know that the pin likes to lost, fall when putting on, miss when storing wheels...

✔ In order to avoid such situations, we have introduced an easy and effective solution that practically completely reduces this unfavorable phenomenon - we have combined the pin with a special pin Micro Cord.

✔ The cable was threaded through the hole, at one end a pin was mounted on the other pin, thanks to which the whole is permanently attached to the construction of the wheels.

✔ This modification will be useful especially when swimming in a pontoon, where when changing the wheel setting, the pin will not fall into the water.

✅ MICRO CORD LINK PARAMETERS

✔ The Micro Cord we use is thin, but at the same time very durable and resistant to abrasion.

✔ Technical data:

• diameter - 1,18 mm
• Break resistance - 100lbs/46kg
• material - 100% nylon

✅ See video with assembly, operation and wheel strength test ;)

www.youtube.com/watch?v=8gfNf2Ta8ys

✅ At our other auctions you will find, among others: anchor rope guide, pontoon wheels with rod holders.

✅ COMPLIANT TYRES

✔ Tubeless wheels with polyurethane foam with weight only 0,9kg and diameter 28cm.

✔ Thanks to this, it does not have the ability to pierce them by launching a pontoon or boat in difficult conditions. Wheels can be removed in seconds.

✅ The large width and appropriate diameter of the tires mean that virtually no substrate (stoney, muddy) is a problem.

✅ PROPERTIES OF THE TYRE MADE OF POLYURETHANE FOAM

• tyre made of polyurethane foam is very durable, flexible and puncture resistant
• foam tyre perfectly dampens vibrations
• foam does not absorb moisture and is resistant to chemical agents
• Physical parameters of polyurethane foam will not change over time
• foam shows high resistance to all mechanical and atmospheric factors such as friction, pressure, salt, oils, detergents, UV rays, wide temperature range
• Polyurethane is resistant to most organic solvents and acids and bases.

✅ MOST IMPORTANT FEATURES:

• tubeless wheels full
• Wheel diameter 28 cm
• Permissible load - 200kg
• Adjustment of the angle of inclination of raised wheels
• Function for easy launching in shallow water
• Bearing roller stainless
• Spin passing through the wheel hub and stainless steel screws
• The wheel set is fully detachable (except for the tire and rim)
• Weight of one wheel with aluminum construction is only 2kg
• Assembly and disassembly, takes a few seconds
• Color: grey rim, black tire

✅ SET INCLUDES:

• 2 x wheels with extensions
• 2 x slats (wheel guide) mounted to transom/reef
• screws for mounting guides for transom/reef
• 6 x pins with pins (embedded on the rope)
• 1 x instruction for assembly and use

▶ DIMENSIONS:

• wheel height with extension - 58 cm (if necessary, you can shorten the arm, using a metal ball or angle grinder (while maintaining health and safety rules) and then drill a new hole fi 16 on the wheel axis. We always shorten from the side of the wheel)
• guide height - 20 cm

✅ QUICK AND SIMPLE CHANGE OF WHEEL POSITION

✔ Changing the position of the wheel is done by moving the pin with the pin without the use of keys and takes seconds.

✅ POSSIBLE WHEEL SETTINGS

✔ Wheels in the lower position (help to launch the pontoon and protect the engine screw when launching and pulling the pontoon/boat out of the water)

✔ Wheels in the upper position (circles do not need to be removed after launching. Simply place them in the upper position and you can swim freely and even use them as a support, e.g. landing net)

✔ Adjusting the angle of inclination of raised wheels - especially useful when swimming on an internal combustion engine. If the engine body at the turn will interfere with the raised wheels, it is enough to lower them by a level lower (wheel guides have additional holes) as in the photo next to it.

✔ Function facilitating launching in shallow water - the pin blocking the wheels in the lower position does not pass over the wheel arm but behind the arm, which significantly facilitates its pulling out and lifting the wheels upwards.

✔ After swimming, the wheels can be removed completely, leaving only the guide attached to the transom (it does not interfere with the folding of the pontoon and does not need to be disassembled).

✅ FREQUENTLY ASKED QUESTIONS:

• "Wow, will this amelinium hold? " A: By using the right aluminum alloy, the wheels can withstand heavy loads. They can be used to transport four-meter units :)
• "The wheels are too long or can they be shortened by yourself? " A: Of course, they can be shortened using a metal ball or angle grinder (while maintaining health and safety rules) and then drill a new hole fi 16 on the wheel axle. We always shorten from the side of the wheel.
• "Do you have spare parts" Ap. We are the manufacturer of these wheel sets - we have all spare parts :)
• "can the wheels be dismantled and placed in bulk in the pontoon after reaching the water? " Answer: Yes, they can be removed completely or lifted at an angle up and locked with a pin.
• Does the transom require additional sealing? answer There is no need for additional sealing, as the lock screws designed for mounting the wheels ensure proper sealing.
• I bought wheels but without rod holders. Can I buy them separately. answer Yes.

If you have any questions, our team is at your disposal :)

⭐ JOY OF PURCHASES AND 100% SECURITY OF EACH TRANSACTION ⭐

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Manufacturer code	010
Parametry	Model	Light Alu
Parametry	Brand	RWW
Parametry	Kind	transport accessory
Parametry	For	pontoons and boats
Parametry	Packaging status	original