Keltuvas FARM LIFT 60" 150CM 3T 11-135CM off-road

Trumpai apie prekę

Prekė: Keltuvas FARM LIFT 60" 150CM 3T 11-135CM off-road. Kategorija: Trapeciniai keltuvai.

• Gamintojas: Wuber
• Modelis: W22044 PODNOŚNIK FARMERSKI 60 150CM OFF-ROAD

► LARGE LIFTING RANGE | ► MADE OF STRUCTURAL STEEL & REINFORCED CARBON STEEL | ► RATCHET MECHANISM | ► WINCH FUNCTION | ►LIFT 3000 KG | ► HEIGHT 150 CM

⚙ TECHNICAL SPECIFICATION:

• Producer: WUBER

• Maximum lifting capacity: 3000 kg (3 Tons)

• Overall height: 150 cm (60 inches)

• Lifting height: 1350 mm

• Minimum height: 110 mm

• Lever length: 75 cm

• Device weight: approx. 14 kg

• Strip material: Steel 45#

• Body design: Steel Q235

• Screw class: 8.8

• Paint coating: Powder painting

• Safety system: Ratchet

⭐ END OF PROBLEMS IN THE FIELD

✅ Leverage 3 tons ► Real force for lifting heavy terrain trucks, tractors and forestry machinery without worrying about overloading the equipment.

✅ Height 150 cm (60”) ► A huge range of work allows you to pull the car even from the deepest ruts, where standard 48” jacks are too short.

✅ Reinforced carbon steel construction ► The lift retains rigidity and geometry even under extreme stresses.

✅ 4in1 ► Can act as: lift, hand winch, spreader and compression

✅ Class 8.8 screws ► You can be sure that the key connecting elements will not fail under maximum load.

✅ Minimum starting height 11 cm ► You will lift the load almost from the ground level, which saves the situation when deep burying the wheels in soft ground.

✅ Massive foot up to 0,5 cm thick ► A construction that withstands huge point pressures without the risk of breaking the base.

⚡ MADE FOR 4X4 CARS

✅ Weight 14 kg ► You can easily mount it on your car, a compromise between armored durability and mobility

✅ Long handle 75 cm ► Long lever makes lifting a 3-ton car requires less strength of your muscles.

✅ Professional powder coating ► Your equipment is protected against corrosion, mud and harsh weather conditions for many seasons.

✅ Anti-slip handle cap ► Gain a firm grip and full control over the mechanism, even when working in rain, mud or thick gloves.

✅ Precisely dragged rail made of reinforced carbon steel ► The mechanism operates smoothly and without jams, which eliminates the risk of sudden weight drop during operation.

✅ Suitable for high suspension ► Specialized design dedicated to 4x4 cars, which allows for trouble-free service in the field where ordinary jacks do not reach the frame

✅ Quick change of direction (up/down) ► Instantly switch operating mode in one move, which significantly speeds up rescue operation in difficult terrain.

⭐ WHY SHOULD YOU CHOOSE OUR EQUIPMENT?

✔ Our lifts are made of the highest quality materials and using proven technological solutions,

This makes them the most advantageous in their price range

► High quality

► Attention to the smallest details technical and visual

► Brand equipment with established market position

► Full access to spare parts and fast service

► Door to door - we will do everything for you!

⭐ BET ON PROVEN EQUIPMENT FROM THE RENOWNED BRAND WUBER ⭐

⚡ YOUR UNIVERSAL TOOL

✔ Lift:

• Set the lift on a stable ground directly under the strong structural element of the car (e.g. steel bumper or threshold). Lock the wheels with wedges and pull the handbrake. Switch the mechanism to the “Up” position and pump with the lever until the vehicle reaches the desired height.

✔ Manual winch:

• Put the jack horizontally. To its ends – the upper clamp and the support foot – attach the chains: one to a fixed point (e.g. trees), and the other to the vehicle. Set the mechanism to lift and pump with the lever to attract the car.

✔ Spreader:

• Place the lift between the elements you want to extend. Use the support foot and the upper clamp (attached to the top of the rail) as resistance points. Start pumping with a lever – moving the foot up the rail will increase the distance between the ends and effectively spread the structure.

⭐ MORE USES FOR THIS TOOL?

✔️ Clamping:**

• Turn the top clamp on the rail upwards, towards the support foot. Place the items you want to clamp between the foot and the clamp. Start pumping the lever – the foot will move up the rail, closer to the clamp, and very firmly squeeze the items between them.

✔️ 4. Forestry Work:**

• Dig around the tree trunk and cut the main side roots. Place the lifter on a solid, wide base (e.g., a thick log or board) right next to it. Wrap the root with a strong chain and hook it to the lifter's support foot. Start pumping the lever, pulling the root vertically upwards.

✅ HOW DID WE MAKE THE LIFT?

Q235 Steel Main Rail:

• ► Support structure made of hot rolled steel with increased plasticity.

• ✔ This material is designed to work flexibly under extreme load, eliminating the risk of sudden breakage, which is the bane of cheap cast iron castings.

Movable Elements of Structural Steel 45#:

• ► Critical moving parts – climbing pins and ratchet mechanism – were forged from high carbon steel 45#.

• ✔ Thanks to the hardening process, these elements are resistant to abrasion and deformation, ensuring smooth "climbing" on the rail holes even at a full load of 3 tons.

Dragging process :

• ► The holes in the rail and the mechanism elements have been finished by precise dragging, which guarantees smooth operation and minimizes friction.

• ✔ Significantly extending the life of the device

❌ DON’T THINK ABOUT CHEAPER REPLACEMENTS – CHOOSE SPECIFIC EQUIPMENT ✔

⭐ STRONG AND RELIABLE LIFT

✅ Armoured Construction ► The thickness of key elements such as: foot, head, ratchet mechanism reaches 20 mm.

✅ Anti-slip Handle ► The rubberized handle tip provides a secure grip, crucial when working in rain, mud or snow, reducing the risk of the lever slipping out.

✅ Lever diameter 33 mm ► Thick metal that will not bend under weight when pumping

✅ Return Latch ► Precise operating mode switch (Up/Down). In the vertical position, the lever is locked, which prevents uncontrolled movement during transport.

⚡ TECHNOLOGY IN THE SERVICE OF SECURITY

Why do we focus on “dragging steel”?

It's a technology from the manufacture of weapons and gears. It guarantees precision that cheap replacements are missing.

• ❌ Competition problem: Cast or knocked holes have large clearances. Effect? Unequal work and “hooking” of the mechanism.

• ✔ Our solution: Holes are calibrated. The pin fits perfectly, providing maximum contact surface.

• ✔ Effect: The load of 3 tons is distributed evenly (not pointwise).

⚠ SAFETY INSTRUCTIONS

• Note on bounce: Keep your body and head out of reach of the lever. Do not let go of the handle until you lock it vertically – it threatens to bounce sharply.

• Stabilization: Place the lift on hard ground. In mud or sand always use the field base to prevent the load from tipping over.

• Wedges and mare: Lock the wheels with wedges before work. The lift is only for lifting – after lifting immediately use workshop mare.

• Maintenance: After mud, wash the mechanism with water. Lubricate only with light penetrating oil. Avoid thick greases – the sand glued to them destroys the pins.

✔ SET INCLUDES

• ► Farm Lift 60” 3T WUBER W22044

• ► Original manufacturer packaging

• ► Operating instructions

Specifications