Lieferzeit in ganz Litauen: 5-10 Werktage
Lieferpreis an die angegebene Adresse: 3 Euro
Trumpai apie prekę
Prekė: Kampinis pjūklas su lazeriu GMM-MS216, 1500W, 216 mm. Kategorija: Kampiniai pjūklai.
- Gamintojas: GoodMajster
- Modelis: GMM-MS216
Technical data
- ⏩Model: GMM-MS216
- ⏩Engine power: 1500W | S1
- ⏩ Power Supply: 220-240V | 50Hz
- ⏩Laser pointer: yes
- ⏩Rotary speed without load: 4800rpm
- ⏩Dimensions of the cutting disc: 216mm x 25,4mm
- ⏩Disc tilt: 0-45 degrees
- ⏩Complex oblique cut at an angle of 45/45st: 215x35mm
- ⏩Slanted cut at an angle of 45/0st: 215x70mm
- ⏩Slanted cutting at an angle of 0/45st: 305x35mm
- ⏩Simple cut at 0/0st: 305x70mm
- ⏩Lpa sound pressure level: 94dB(A) / (KpA 3dB(A) )
- ⏩LWA volume level: 107dB(A) / (KWA 3dB(A) )
- ⏩Weight: 12kg net / 14kg gross
Set Composition:
- ✅Slash saw - GoodMajster Machinery GMM-MS216
- ✅Cutting disc GoodMajster Machinery 24-tooth / Mounted on saw
- ✅2x Side supports
- ✅1x Clamp vise
- ✅ Shield cover
- ✅ Dust bag
- ✅Instruction manual in Polish
The GoodMajster Machinery GMM-MS216 bevel saw is a slash with feed and laser.
The slash saw GoodMajster Machinery GMM-MS216 is a ✅bevel saw with feed✅, equipped with ⭐laser designed for cutting wood, metal and aluminum (after using a special cutting disc).
It allows you to make precise cuts for even wide elements thanks to ⏩feed application.
High power ⏩⏩1500W and disc ⏩⏩216mm allow you to cut materials with a width of up to ⏩305mm and a thickness of up to ⏩70mm.
The slash saw has an inclined dial, so it can cut at an angle of up to 45 degrees.
Its stable construction is ⏩durable, a extendable supports allowing you to cut even long elements.
The GoodMajster Machinery brand has been using the company's experience since ⭐ 1999 ⭐ and is a ⭐ Polish Brand ⭐ , guaranteeing professional advice, fast service, and the highest quality of its products, which is why ✔ The GMM-MS216 miter saw is delivered to the customer after TESTING EACH ITEM , in order to check its correct operation. ✔
The motor has a fully copper winding - ⏩COOPER ⏩WIRED ⏩TECHNOLOGY, which is much more efficient, resistant to overheating, and damage! Buy machines only with motors that have a copper winding, because aluminum can make a short circuit and cause a fire!
GoodMajster Machinery is a brand whose company has existed since ⭐1999, which is why it has extensive experience in the subject of construction machinery. GoodMajster Machinery is not compared to cheap machine models, and its main goal is to offer machines:
- ⏩failure-free
- ⏩of high quality
- ⏩with high durability
- ⏩with superior performance
- ⏩on the best components of recognized manufacturers.
The machine is addressed to ✅demanding customers, carpentry companies, furniture companies and fitters✅, which is why each piece undergoes a detailed quality control at every stage of production: from checking the quality of castings, through checking the efficiency of the engine, ending with checking the operation of the finished equipment. Therefore, each copy has a ⭐unique serial number⭐, confirming the test and passing the procedure ✅QUALITY CONTROL✅.
Bevel with horizontal guide for the highest precision.
GoodMajster Machinery uses only the best solutions and technologies, which is why ⏩⏩the bevel has been equipped with guides in a ⏩vertical system. It is one of the few bevel saws with a 216mm disc using guides in a vertical arrangement, because they are usually used in professional machines with a large disc. The GMM-MS216 guarantees the highest precision, which is why chains in vertical have many advantages:
- ✅ carry higher loads than guides in a horizontal layout
- ✅ provide lighter feed
- ✅ guarantee greater cutting precision, because the guides are stationary, the motor with the disc moves over them
- ✅they are better than the horizontal system, where the guides move together with the motor, which can cause distortion of the guides
- ✅they are more resistant to damage and wear
High cutting range
Thanks to its innovative design, the ⭐wood cutter with laser⭐ has a large cutting range:
⏩Simple cutting at an angle of 0 ° / 0 ° : 305x70mm
⏩Miter cutting at an angle of 0 ° / 45 ° : 305x35mm
⏩Slant cutting at an angle of 45 ° / 0 ° : 215x70mm
⏩Angiving cut folded at an angle of 45 ° / 45 ° : 215x35mm
The high cutting range allows the use of a slash:
- ✅on construction (when cutting formwork boards)
- ✅ in carpentry (for cutting patches, rafters, purlins, roof structures)
- ✅ in carpentry (for cutting boards and furniture boards)
- ✅u fitters (cutting floor panels, drywall)
- ✅in the workshop (for cutting metal after using a special disc)
The incline of the 0-45-degree disc allows you to cut materials diagonally.
GoodMajster Machinery GMM-MS216 has a ⭐disc incline ⭐ in the range of 0-45 degrees.
This allows you to cut materials diagonally, depending on your needs in the range of ⭐0-45 degrees⭐. The slope is stable and has a lock and a clear scale.
The incline scale has a ✅readable indicator, so you do not have to measure the angle every time you make a cut and change the incline of the disc.
The incline is equipped with a pressure screw, which guarantees precision after setting the kata, and prevents spontaneous deregulation of the cutting angle, which is very important during precise cuts in the furniture industry.
The rotating work table extends the capabilities of the slash.
The machine is equipped with a ✅rotating working table✅, which allows ⭐cutting both in ⭐left and ⭐right diagonally.
Rotating the table is quick and can be done in 3 simple steps:
- ⏩Loose down the pressure
- ⏩Press the button at the pressure
- ⏩We set the set angle by "turning" the slash to the left or right.
As a bevel saw with feed for construction, it has been equipped with a clear ✅ graduation with an angle of 31,6 degrees✅ marked, which is very important when trimming the skirting board so that it fits into a corner with an angle of 90 degrees.
When trimming MDF skirting boards to fit a 90 degree corner and form an outer corner, we set an angle of 31,6 degree, and then make a cut. Once