Frezeris Festool DOMINO DF 500 578462 medžio jungtims

Trumpai apie prekę

Prekė: Frezeris Festool DOMINO DF 500 578462 medžio jungtims. Kategorija: Frezavimo staklės.

• Gamintojas: no brand
• Modelis: 578462

Catalogue No. 578462, 576794

1. Milling machine for connections DOMINO DF 500 Q-Plus NEWER MODEL

• cutter DOMINO D5
• angle support - additional guide
• SW 8 flat wrench
• plug it 4 m power cable
• in Systainer SYS3 M 187

2. Assortment of DOMINO beech connectors 576794

• DOMINO connector set 4 x 20 mm (450 pieces), 5 x 30 mm (225 pieces), 6 x 40 mm (150 pieces), 8 x 40 mm (100 pieces), 8 x 50 mm (75 pieces), 10 x 50 mm (60 pieces)
• DOMINO cutters of sizes 4, 5, 6, 8 and 10
• Systainer M 187

* THIS NEWER MODEL WILL BE AVAILABLE FROM SEPTEMBER

Technical data:

• Power consumption: 420 W
• Idle speed: 25500 min-1
• Limit for setting milling depth: 12, 15, 20, 25, 28 mm
• Max. milling depth: 28 mm
• DOMINO cutter for sockets Ø: 4, 5, 6, 8, 10 mm
• Scale setting of milling depth: 5-30 mm
• Milling diagonally: 0-90 °
• Dust extraction connection Ø: 27 mm
• Weight: 3,6 kg

It simply connects more precisely. Lamelownica

• Versatile use with connectors ranging in size from 4x20 mm to 10x50 mm
• Patented and unique for manual machines milling principle ensures accurate and light work
• Quick and simple set stops guarantee precise work results
• Highest stability and torsion resistance of the connection made using DOMINO connectors
• System equipment suitable for both milling machines for DOMINO connections

Quickly the best result

Thanks to the innovative limiter system, positioning is carried out instantly. The height and depth of milling can be quickly set with a slider.

It is better to work with the system

DOMINO, cutters, connectors up to 10 x 50 mm, flexible adjustment and compatible system equipment provide almost unlimited connection possibilities.

Assortment of DOMINO beech connectors DS 4/5/6/8/10 1060 BU

• All DOMINO pegs are within easy reach, thanks to the ordering in Systainer
• You can start working right away, because the necessary cutters are included
• The cross-section of the DOMINO stud corresponds to the cross-section of three round studs with the same drilling diameter, which makes it extremely stable compared to them.
• Side protruding guide lugs center the pin in DOMINO and thus ensure perfect alignment of the workpieces
• Specially shaped adhesive pockets and grooves evenly distribute the adhesive for optimal connection
• Excess glue can get out through side longitudinal grooves
• 100 % anti-twist from the first DOMINO connector
• Quickly find the right pin thanks to embossed size information
• all DOMINO pegs within easy reach and carefully packed in Systainer³

The system that connects everything

DOMINO DF 500 is an extremely handy device, and at the same time giving almost unlimited possibilities of making calls. Whether it is plate structures, bodies, lightweight frames or frames, the DF 500 provides the highest precision, flexibility and ease of use.

• Principle of pendulum milling

  Unique among manual devices and Festool patented milling motion of DOMINO milling machines. The simultaneous rotational and pendulum movement of the cutter allows light work and cutting holes without burn marks. Thanks to the pendulum movement, overheating of the cutter is avoided, which ensures its very long shelf life.

• Principle of longitudinal holes

  Fitted alignment: the first DOMINO connector is positioned with a precise longitudinal hole, subsequent ones are adjusted with wider longitudinal holes with clearance – so you can align the connection without special effort. As a result, a stable connection is created, protected against twisting from the first connector.

Innovative sampler system

One of the great advantages of the DOMINO connection milling machine is the time savings resulting from the lack of measuring and marking – the DOMINO DF 500 can be quickly and accurately positioned, thanks to the limiters.

Convenience and confidence

The unique and patented simultaneous rotation and swing movement of the milling machine allows light work and cutting holes without burn marks.

Convergence for connections in drawers

Also thin elements, from 12 mm, can be combined in a simple way, which is useful for the side walls of drawers.

Saving time with repeated milling depths

High flexibility and precision: when using a lock with marked values, you can choose the desired milling depth. Sizes are available: 12 mm, 15 mm, 20 mm, 25 mm and 28 mm.

• The highest stability

  The special shape of the DOMINO studs, combined with the swelling "glue pockets" and side longitudinal grooves, make the studs hold securely. The DOMINO DF 500 Festool connection milling machine is used for machining DOMINO fasteners up to 10 x 50 mm in size. Also available as a ready-made rod for individual adjustment.

100% torsion protection

Starting from the first DOMINO connector, the joints are completely protected against twisting, without the need to level the workpieces.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	no brand
Parametry	Milling machine type	lamello
Parametry	Power supply	mains
Parametry	Maximum milling depth	28 mm
Parametry	Manufacturer code	578462
Parametry	EAN (GTIN)	5907952568211
Parametry	Batteries included	no