Endoskopinė apžiūros kamera 5m Full HD LED IP67 3in1 USB vamzdžiams

Trumpai apie prekę

Prekė: Endoskopinė apžiūros kamera 5m Full HD LED IP67 3in1 USB vamzdžiams. Kategorija: Endoskopai.

• Gamintojas: Blow
• Modelis: 14-407#

The BLOW E-500 endoscope is a practical tool for controlling hard-to-reach areas where a regular camera or vision is not enough. The device is equipped with a large IPS 4,3 screen, a camera with a resolution of 2 MP / Full HD 1920 × 1080 and a 5-meter cable, making it suitable for both workshop, garage, as well as during installation or service work.

✅ Large IPS 4,3" screen – convenient observation of the examined place without the need for an additional phone or monitor.

✅ The 2 MP camera – Full HD 1920 × 1080 image – allows you to take a close look at elements in hard-to-reach spaces.

✅ Cable with a length of 5 meters – allows inspections in pipes, installations, car components and other deep and hard-to-reach places.

✅ 8 LEDs – illuminate the space in front of the camera when working in the dark.

✅ Lighting brightness adjustment – allows you to adjust the amount of light to the conditions prevailing during the inspection.

✅ IP67 camera waterproof – the probe can be used when inspecting places exposed to moisture.

✅ Camera with a diameter of only 8 mm – a small head allows you to reach tight spaces.

✅ Focus range 2 to 10 cm – suitable for accurate observation of elements directly in front of the camera.

✅ Viewing angle 70° – provides a wide view of the controlled area.

✅ Zoom image – the ability to zoom in and out of the image using the buttons on the device.

✅ 180° image rotation – facilitates correct image positioning while driving the camera.

✅ Black and white mode – additional possibility to adjust the display of the image to the conditions of the inspection.

✅ 3000 mAh battery – allows you to use the device without a constant connection to power.

✅ USB-C charging 5 V / 1 A – convenient and universal power supply for the device.

🔍 Look where you normally don’t have access

A long, 5-meter cable terminated with a small 8 mm camera allows you to control the places hidden behind structural elements, inside the installation or components.

The endoscope is perfect for:

• car diagnostics,
• control of the engine compartment,
• inspection of wires and ducts,
• inspection of pipes and installations,
• hydraulic work,
• servicing of equipment and machinery,
• control of space behind walls and furniture,
• electrical and installation works,
• workshop repairs,
• Search for small elements in hard-to-reach places.

💡 8 LEDs – good visibility also in the dark

The camera head is equipped with 8 LEDs, which allow you to illuminate the controlled area.

The light intensity can be adjusted directly using the buttons on the device. This allows you to limit the X-ray of the image located very close to the camera or increase the brightness when working in complete darkness.

🖥 Large 4,3" IPS screen

Built-in color IPS screen with a diagonal of 4,3" allows convenient inspection on an ongoing basis.

You do not need to observe a small image on an additional device – the screen is located directly in the endoscope housing, so that the whole set is ready to work after starting.

🔎 Full HD and approximation function

The camera uses the CMOS 2 MP sensor, and the image is displayed in 1920 × 1080 Full HD resolution.

The device also has the Zoom+ and Zoom- functions, which makes it easier to view selected fragments of the controlled place more accurately.

🔄 180° rotation of the image

When driving a flexible probe, the camera can be in different positions. The dedicated button allows you to turn the image 180°, so you can quickly set a convenient viewing orientation.

💧 IP67 rated camera

The camera probe has an IP67 waterproof rating, increasing its application possibilities during inspection of wet places.

Note: The IP67 designation applies to the camera part, not the entire device with a display.

🧲 Practical tips included

The endoscope comes with useful accessories to increase the scope of application of the camera:

✔ magnet – helps in pulling out small metal objects,

✔ hook – can facilitate the extraction of elements out of reach of the hand,

✔ side mirror – allows you to observe the space from a different angle,

✔ 3 fastening latches – designed for mounting accessories.

• Brand: BLOW
• Model: E-500
• Type: endoscope / inspection camera
• Screen diagonal: 4,3"
• Screen type: IPS
• Sensor: CMOS
• Camera resolution: 2 MP
• Image resolution: 1920 × 1080 Full HD
• Camera head diameter: 8 mm
• Lighting: 8 × LED
• Focus range: 2 to 10 cm
• Angle of view: 70°
• Camera waterproof class: IP67
• Camera cable length: 5 m
• Battery capacity: 3000 mAh
• Charging: 5 V / 1 A
• Charging connector: USB-C / Type-C
• Camera temperature: from -10°C to 80°C
• Working temperature of the device: from -10°C to 45°C
• Zoom function: yes
• Image rotation: 180°
• Black and white mode: yes
• LED brightness adjustment: yes

📦 Contents of the set

✅ Endoscope BLOW E-500 with 4,3"

✅ Cable with camera 5 m

✅ USB-C cable

✅ Magnet

✅ Hook

✅ Side mirror

✅ 3 latches for accessories

✅ User manual in Polish and English

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Blow
Parametry	EAN (GTIN)	5900804158394
Parametry	Manufacturer code	14-407#
Parametry	Batteries included	yes