Elektrinė pelėkautė NO PEST PAW 1800V

Trumpai apie prekę

Prekė: Elektrinė pelėkautė NO PEST PAW 1800V. Kategorija: Gyvūnų atbaidikliai.

• Gamintojas: No-Pest
• Modelis: PUŁAPKA RAŻĄCA DO ELIMINOWANIA MYSZY SZCZURÓW

✅ Purpose: for mice and small rats

✅ Eliminates mice without poisons, poisons and other toxic substances

✅ Humanitarian way to get rid of rodents - infected die very fast and painless

✅ Possibility of wireless use

✅ Unique tunnel design + compact dimensions make you press the trap even in very tight places

✅ Allows you to get rid of even up to several rodents on 1 set of batteries (4x AA batteries)

✅ There is room for scented lures (worth using): e.g. peanut butter, nuts, grains, etc.

✅ Special LED and sound signaling – informs about the mode of operation and battery consumption

✅ The device meets European standards FCC, CE and ROHS

✅ The set additionally includes a USB cable

The electric trap is a modern device that allows you to control the population of mice without reaching for chemical agents.

It works quickly and efficiently – when the rodent enters, immediately goes to the high-voltage field of destruction.

The most important advantages of the trap:

• does not use poison or substances that can contaminate the environment.

• The mouse dies instantly – the process is almost instantaneous.

• ease of use and cleaning – simple operation on a daily basis.

• The device can be used repeatedly after replacing the battery.

The operation of the device is based on the electric destruction mechanism in sterile conditions of the closed interior.

Step by step process:

1. mice are attracted by the smell of bait placed inside.
2. After entering the trap chamber, the electric circuit closes.
3. A pulse of approximately 1800 V is emitted per second.
4. The animal is immediately killed on the spot.
5. The chamber is ready to be reused after removal of the victim.

The presence of rodents in the house, farm or warehouse is not only discomfort – it is real losses and serious threats. Here’s what they can do:

• ❌ Installation damage – they chew through cables, electrical wires, pipes and insulation, creating a risk of fire and flooding.

• ❌ Destruction of building materials – they bite wood, concrete, bricks and structural elements, weakening the durability of buildings.

• ❌ Food contamination – leave feces, urine and hair, exposing household members to diseases and material losses.

• ❌ Health threat – carry dangerous diseases, m.in. leptospirosis, salmonellosis or hantaviruses.

• ❌ Equipment damage – destroys furniture, carpets, toys, packaging and other everyday objects.

• ❌ Stress and noise – their nighttime activity (scratching, squeaking, running) disrupts sleep, which increases stress and causes constant anxiety in people and pets.

Quick response allows you to limit their presence and restore the comfort of using space.

The device is used in many locations:

• ✔ basement and utility rooms,

• ✔ garages where rodents seek shelter,

• ✔ kitchens and pantries, where they are attracted to food,

• ✔ offices, hotels, warehouses and even cottages,

• ✔ altans and sheds in garden areas.

Instructions for use

1. Make sure the device is turned off, then remove the bottom cover.
2. Place the bait in the bait tray. You can use peanuts, bread, lard or other products liked by mice.
3. Mount the bottom cover back and move the switch to the ON position.
4. The device will make a double beep, which means it is in standby mode. The red LED will flash every 5 seconds.
5. Place the trap along the wall where you noticed the presence of the mouse.
6. After the mouse is killed, the blue LED will flash and the device will make an audible signal every 30 seconds.
7. Turn off the power, remove the dead mouse and the trap will be ready for reuse.

We highly recommend using the placement function inside the lure trap, which will attract mice and other rodents. This significantly increases the effectiveness of the No Pest ® trap .

The best lures, the most effective attracting mice are:

• dedicated decoy No Pest® (see tab "Buy together"),
• peanut butter,
• chocolate and sweets,
• cheese yellow,
• nuts and seeds.

• Red and black -> Standby (flashes once every 5 seconds),

• Red and red colors -> Mouse kill (150 seconds),

• Blue and black -> Mouse was killed (flashes once every 5 seconds),

• Red and green colors -> Low battery.

Audio alarm means that the mouse has been killed (sound twice every 30 seconds).

Technical specification

• Power supply: 5V/1A power supply, 4x AA batteries

• Output voltage: about 1800V

• Power consumption: 2,5W

• Dimensions: 19 x 8 x 6 cm

• Brand: No Pest®

The set also includes a USB cable and instructions for proper use of the trap.

The device is CE marked.

❓ How does this mousetrap work?

▶ Produces an electrical impulse that eliminates the rodent when it enters.

❓ What power supply does the device support?

▶ The trap runs on 4 AA batteries or a 5V/1A USB power adapter.

❓ Can it be used multiple times?

▶ Yes, just clean the chamber and arm it again.

❓ What rodents does the device work on?

▶ For mice and small rodents that will fit into the chamber.

❓ Do you need bait?

▶ Yes, nuts or peanut butter are recommended as a decoy.

❓ Where is the best place to set the trap?

▶ At the walls, along the pathways or in places of rodent activity.

❓ How long do batteries last?

▶ The new batteries are enough for many activations – depending on the intensity of use.

❓ Does the trap get dirty or leave marks?

▶ No, it leaves no residue or impurities like poisons.

❓ How do I know if a trap has worked?

▶ LED indicator informs about the activation of the trap and the presence of a rodent.

❓ Is the unit suitable for the kitchen or office?

▶ Yes, it can be used in utility rooms without contact with food.

Warnings

Inappropriate use may cause electric shock or mutilation. Never use the product near small children, small pets, life-restraint devices and flammable materials. Do not place the device on damp surfaces or surfaces that may cause flooding. Before opening the trap, the device must be switched off by means of a button located on the device housing and disconnected from the power source.

Gallery

Specifications