Dvigubas keltuvas ELPRO DL240 4t, automatinis, ilgos svirtys

Trumpai apie prekę

Prekė: Dvigubas keltuvas ELPRO DL240 4t, automatinis, ilgos svirtys. Kategorija: Kolonų keltuvai.

• Gamintojas: no brand
• Modelis: DL240.,

➡️ Two-Post Electro-Hydraulic Lift

ELPRO 4-Ton Capacity

DESIGNED FOR VANS AND CARS

• AUTOMATIC - locks released with a button
• Asymmetrical, two-stage arms allow for servicing of passenger cars, vans, and 4x4 vehicles
• Extendable adapters
• Mechanical synchronization at floor level
• Electromagnetic height lock released automatically
• Automatic arm lock during lifting
• Limit switch
• CE certificate, full documentation, and manual in Polish

➡ TECHNICAL DATA:

• Lifting capacity 4200 kg
• Lifting time 50 s
• Lifting height 1900mm
• Height 2824mm
• Width 3420mm
• Distance between columns 2830mm
• Arm length 140 cm – 2 arms after folding – 91 cm
• Arm length 133 cm - 3 piece arms when folded – 73 cm

➡ EXTENDABLE ASYMMETRIC ARMS

Massive asymmetric two- and three-part arms significantly affect the comfort and safety of your work, thanks to this solution the center of gravity of the car is closer to the center of the lift and the driver's door can be opened wider, which makes it easier to get on and off when setting up the vehicle or diagnostic work.

Thanks to this solution, the lift is more universal than lifts with symmetrical arms, we can lift small passenger cars, SUVs, 4x4s, vans and most BUSes on it.

➡ TRIPLEX CHAIN

Reinforced chain link - Elpro lift is equipped with a roller chain with three parallel rows of links that transfer force from hydraulic cylinders to lift trolleys, this solution significantly affects safety, durability, higher load capacity and higher tensile resistance, which is crucial when lifting cars with higher weight

➡ AUTOMATIC

Button release locks

➡ ACTUATOR COVERS - CURTAINS

The lift columns are equipped with protective curtains that are designed to keep the guide chain and cylinder of the actuator clean from dust, dirt and filings, thanks to such protection we protect the drive elements from damage.

➡ HYDRAULIC PUMP

The ELPRO lift is equipped with a hydraulic pump that is located at the top of the column so that it does not take up space in the working area around the lift, the composite tank allows you to easily and quickly control the oil level.

➡ AUTOMATIC SECURITY

ELECTROMAGNETIC

The safety of the operator under the lift is paramount, our lift in addition to hydraulic and rope protection is equipped with an electromagnetic locking system, so that your work under the lift is 100% safe.

Principle of operation of electromagnetic lock

• with the push of a button we lift the vehicle up, while lifting we hear the characteristic clicking of ratchets
• We stop the lift at working height
• After stopping the actuators, press the lock button, and the ratchet falls into the tooth of the locking strip.
• The vehicle is mechanically protected, not only hydraulically

Leaving the vehicle

• Just press the lowering button to activate the electromagnet that lifts the ratchet and unlocks the trolley.
• Actuators can safely leave the car.

➡ RUBBER PROTECTIVE PADS

FENDERS

The rubber overlays used on the lift trolleys act as shock absorbers thanks to this solution, you can be sure that when getting in and out of the car you will not damage the door in your customer's vehicle.

➡ ARM LOCK

Arm locks are safety mechanisms that prevent the arms from moving automatically when lifting the vehicle, the locks work fully automatically, when lifting the vehicle they lock and when fully lowered they automatically unlock.

➡ TWIST-OFF ADAPTERS

Unscrewable adapters that are located at the end of the arm allow you to accurately set the support point in both passenger cars and vans, thanks to this solution we can precisely unscrew the adapter to eliminate unevenness in the chassis and avoid pressure on the thresholds and body elements.

➡ LIMIT SWITCH

The limit switch in a two-column lift is a very important safety element that is designed to stop the lift when the arms reach the maximum safe height.

WHEN YOU BUY A LIFT, YOU WILL RECEIVE:

• 15 liters of dedicated HL46 hydraulic oil
• Expansion anchors 10 pcs.
• operating instructions
• DTR technical and operational documentation, CE declarations of conformity

DIMENSIONS AND REQUIREMENTS OF THE SUBSTRATE:

Substrate requirements – two-column lift

The lift should be set on a leveled, dry foundation, without dust and other impurities.

The floor should be made at least 28 days before the assembly date.

The minimum foundation conditions should be as follows:

• Concrete class min. B25 or higher
• Minimum substrate thickness: 30 cm
• Load capacity of the surface minimum 2,1 kg / mm2
• Micro-reinforcement or reinforcement below 20 cm from the floor surface is permitted.
• These characteristics must be guaranteed on a minimum surface area of 4000 mm wide, 1500 mm long
• Permissible unevenness of the floor: 5 mm
• ELECTRICAL CONNECTION Prepare a 4-wire cable with a cross-section of 2,5 mm2 .

When buying ELPRO devices, you get access to a platform that includes:

• air conditioning database for trucks and agricultural machinery
• technical documentation
• service instructions for equipment
• instructional videos from which we will learn, among others, how to assemble, calibrate and operate the device

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	no brand
Parametry	Manufacturer code	DL240.,
Parametry	EAN (GTIN)	5908121339991
Parametry	Number of columns	2
Parametry	Drive	electrohydraulic
Parametry	Column connection	bottom
Parametry	Overall width	3380 mm
Parametry	Overall height	2822 mm
Parametry	Total length	185 mm
Parametry	Engine power	2.2 kW
Parametry	Lifting capacity	4000 kg