Dviejų kolonų keltuvas Redats L-220, 4T, 4000 kg, automatinis, 400 V, su alyva

Trumpai apie prekę

Prekė: Dviejų kolonų keltuvas Redats L-220, 4T, 4000 kg, automatinis, 400 V, su alyva. Kategorija: Kolonų keltuvai.

• Gamintojas: Redats
• Modelis: 30-01-35

Specification:

• Manufacturer:REDATS
• Maximum lifting capacity: 4 tons
• Type: automatic
• Beam: Lower
• Power supply: 400 V
• Lowering time: 25 seconds
• Lifting time: 55 seconds
• Maximum width of the car: 2500 mm
• Engine power: 2,2 kW
• Lifting height: 9 - 193 cm
• Column base dimensions: 380 x 450 mm
• Floor thickness: 30 cm
• Limit switch: yes
• Telescopic Lift Arms: Yes
• Arm length range: 620 - 1260 mm
• Reinforcement frame: no
• Additional Features: -
• Anchors Included: Yes
• Meets UDT certification requirements: Yes
• Hydraulic oil 10L: free
• Dimensions (W x H): 3365 x 2824 mm

What kind of lift is that?

It is an automatic lift with a lifting capacity of 4 tons. If you work with passenger cars or light commercial vehicles, this will work perfectly! Especially when working on suspension or pulling out the engine.

Choose it if you are looking for a lift that:

• saves your time - has automatic lock control, so you don't have to run from column to column
• lifts passenger cars and some vans - lifting capacity 4 tons
• facilitates work on suspension or chassis
• It can handle even wide cars: max. width of the vehicle is 2500 mm
• It will give you comfort of work, even if you are tall and you are tired of bending under the car - because it raises to 193 cm
• is equipped with rope grilles - ropes are the most vulnerable part of the lift - so the covers will provide them with protection against damage

What is better than the L-200?

It is primarily automatic - this means that you do not have to run from column to release the locks! All you have to do is press the appropriate button on the control panel.

That's not all - we've also installed a limit switch here. When the car reaches the maximum lifting height, it stops the lifting process. For your convenience, we have also placed an emergency shutdown button on the control box.

What else is worth knowing about him?

• Type: automatic
• Dimensions (W x H): 3365 x 2824 mm
• Lowering time: 25 seconds
• Lifting time: 55 seconds
• Lifting capacity: 4000 kg (4 tons)
• Lifting height: 9 - 193 cm
• Maximum width of the car: 2500 mm
• Engine power: 2,2 kW
• Telescopic Arms: YES
• Power Supply: 400V
• Beam: Lower
• spout: 30 cm

Simple operation

Setting this lift in the desired position will take you a few seconds at most. To lift the car, press the (lift) button. To leave them, press the lower button.

Simple, isn't it? You can see that you will quickly learn how to use this device. An additional advantage of such a solution is the possibility of emergency leaving the car in the event of a complete power outage / power supply.

Asymmetrical arms - better stability of every car!

This lift is equipped with asymmetrical arms. Here are their dimensions:

• front: 620-880 mm
• Rear: 820-1260 mm

They will provide the perfect balance to any car you lift. Quickly set your paws and fit them into your car!

Long-term durability

The perfect quality of components (durable chain and controls) and careful workmanship ensure reliable use for many years.

In addition, we have all standardized parts for this lift, such as rubber, hydraulic or electronic components.

Durable ropes

Lift ropes are additionally protected with special grilles, so they are perfectly resistant to damage throughout their service life.

Everything at hand!

All the most important functions can be found at hand. The lifting button was on the lift control box. Same with the emergency shutdown button.

Everything at hand!

All the most important functions can be found at hand. The lifting button was on the lift control box. Same with the emergency shutdown button.

Preparation of the substrate

Basic requirements for the preparation of the substrate for the installation of a two-column lift:

• substrate surface 1,5m x 4m x 30cm
• maximum flat surface
• minimum floor thickness: 30 cm
• Class B25 concrete
• 28 days, waiting time for the floor to dry and harden (in the case of a fresh spout)
• The floor must be in the form of a homogeneous concrete slab, with the above-mentioned parameters.

Important

The user is obliged to bring the power cord to the device on his own.

Perfect security

The limit switch will stop the lifting process when the car reaches the maximum lifting height. This ensures perfect safety of use.

UDT - to report or not?

You often ask whether you need to report the lift to the UDT (Office of Technical Inspection). According to Polish law, this must be done. Few sellers talk about it, but in light of the regulations, it does not matter whether you use the lift for your business or privately. Whether you work alone or hire people - the lift is worth registering in UDT.

Do you want to report the lift to UDT?

If you want UDT to collect and allow your new lift to be put into operation, it is worth outsourcing its installation to a team with appropriate permissions. We can help you with that. Contact us and we will prepare a quote for you for the assembly made by a qualified company!

Quality REDATS!

By choosing REDATS you buy from the official distributor of devices of this brand in Poland and Europe. REDATS devices are manufactured in leading factories of this type of equipment, so you do not have to worry about the standards of workmanship or used parts.

Distributor of tools and machines REDATS is a company operating successfully on the Polish and international market since 2006. It is a recognized entity that has already gained the trust of over 500 000 recipients. When buying REDATS machines, you can count on professional and comprehensive support at every stage of the purchase or use of equipment.

Product gallery:

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Product weight with unit packaging	580 kg
Parametry	Brand	Redats
Parametry	Manufacturer code	30-01-35
Parametry	EAN (GTIN)	5902730114505
Parametry	Number of columns	2
Parametry	Drive	electrohydraulic
Parametry	Column connection	bottom
Parametry	Overall width	3365 mm
Parametry	Overall height	2824 mm
Parametry	Power supply	400 V
Parametry	Engine power	2.2 kW
Parametry	Lifting capacity	4000 kg
Parametry	Minimum lifting height	90 mm
Parametry	Maximum lifting height	1930 mm