Dviejų kolonų automatinis keltuvas TECHWAR TL0004-400V 4000 kg

Trumpai apie prekę

Prekė: Dviejų kolonų automatinis keltuvas TECHWAR TL0004-400V 4000 kg. Kategorija: Kolonų keltuvai.

• Gamintojas: Techwar
• Modelis: TL0004-400V

The main advantages of the presented model are precise workmanship, solid construction and reliable components (all our lifts are equipped with aluminum oil pumps). The TL0004 lift is equipped with an electromagnetic locking system, raises to 1900mm, has a low passage of 25mm, is equipped with column covers and a 230V socket on the control box. The front arms have a 3-section telescopic design. The shortest arm spacing (550mm) allows lifting small passenger vehicles. Maximum arm spacing (1476mm) is necessary for stable positioning and safe operation of vans. The arms in the lift are asymmetrical and spread outwards, making it possible to maintain the optimal balance of the lifted vehicle. The standard equipment of the lift includes a set of distances with a height of 80mm. They are necessary when operating vans with tarpaulin, and off-road cars lifted by the frame. The supports placed under the vehicle are twisted and fastened with a latch to the arms and distances.

Automatic lift

The advantage of the automatic lift is convenient control of the lifting and lowering process using the buttons in the control panel, without the need to manually release the locks at each column. The solution reduces the handling time of the lift, because the employee does not have to go to the other side of the vehicle to unlock the lock. Both columns have electromagnets that automatically deactivate the locks when you press the lower button on the control panel. In the absence of power, with the help of special cables you can unprotect the locks and leave the vehicle.

Security

The safety latch system activates automatically when lifting the car. In addition, the limit switch stops the lifting process when the lift reaches its maximum height. The limit switch is also installed in the lowest position of the lift trucks, thanks to which the overload of the hydraulic system has been reduced to a minimum. Additionally, the lift trolleys are equipped with rubber protection to protect the vehicle door from damage. The lift is also equipped with a warning beacon to inform the operator of the lift while the vehicle is being lowered. There is also an emergency switch on the control panel, which will allow you to immediately stop the lift in a dangerous situation.

Long-term durability

Precise execution of components not only translates into a longer life of the lift, but also guarantees better comfort of work. The special design of the electromagnetic locks guarantees quiet operation of the lift. The high quality of the materials used is a guarantee of reliable use of the lift for many years. All our lifts are equipped with reliable and trouble-free aluminum pumps. Mechanical elements (chain, actuator, slides, ropes) are secured with special grilles, mounted on the inside of each column

Documents to UDT

All Techwar lifts have a valid CE certificate issued by a notified body in the European Union and meet the necessary requirements for registration with the Office of Technical Inspection. Together with the lift you receive two copies of the technical documentation. To submit the lift, construction documents, electrical documents and assembly protocol contained in the lift documentation are necessary.

Preparation of the substrate

Basic requirements for the preparation of the substrate for the installation of a two-column lift:

Minimum ground dimensions: length – 4000mm, width – 1000mm, depth – 250mm

The surface on which the lift will be placed should be homogeneous and flat.

Permissible level difference up to 1cm by 4m

Concrete B25/30

Specifications