Diagnostinis testeris Multidiag Pro su nešiojamu kompiuteriu

Trumpai apie prekę

Prekė: Diagnostinis testeris Multidiag Pro su nešiojamu kompiuteriu. Kategorija: Diagnostikos testeriai ir sąsajos.

• Gamintojas: MultiDiag Pro+
• Modelis: Multidiag PRO +

The diagnostic device is designed to work in the workshop and for DIYers

The main unit has a durable housing made of plastic and rubber. It provides above-average mechanical resistance to damage during operation.

The devices come from Polish distribution and are broadcast immediately from Polish

guiding software : Windows 7,10

working language: Polish and other

Hardware version: 2023 highest configuration with NEC relays

software version: Latest available software in Polish

LAPTOP: Post-lease computers (used) from DELL,HP,LENOVO,ACER

Permanent parameters (RAM 4GB,DISK 256-500GB,Comp 2015-2021)

update period: indefinitely

Connectivity: Bluetooth (wireless), USB cable

scope of service: Passenger vehicles, commercial vehicles (up to 3.5tonnes)

wiring: Basic OBD and USB

The device does NOT lock

• YOU GET A READY SET TO WORK

The tester is used for comprehensive operation of vehicle electronics, provides the possibility of full diagnostics, coding, adaptation and testing of components

Abarth, Alfa Romeo, Audi, Bentley, BMW, Cadillac, Chevrolet, Citroen, Chrysler, Dacia, Daewoo, Dodge, Fiat, Ferrari, Ford, Hyundai, Honda, Iveco, Isuzu, Jaguar, Jeep, Kia, Lamborghini, Land Rover, Lancia, Lexus, Lotus, Maserati, Mercedes, Mazda, MG, Mitsubishi, Nissan, Opel, Va

• Revised version BMW, FORD, MAZDA, RENAULT, MERCEDES, GM
• no problems 1.8T VAG
• 2 plate NEC design and relays

• General system scanning: All passenger and commercial vehicles.
• Smart scanning (reading by VIN): vehicles with OBD II after 2001. The model base is constantly growing, of course, please remember that not every model will be able to verify without incorrectly after VIN
• Executive functions
• Offline programming read. (programming, adaptation of new drivers and components) NEW, not used from another car (it is about drivers, e.g. Motorola,continental,siemens); most popular models since 2001-2017
• Service Functions(dpf firing, piston reversing, etc)

In most vehicles you can come to the same function by different routes, you can use function shortcuts, you can use the direct function so-called. the way through the controller. You can also perform general parameterization after a VIN scan.

Main capabilities of the tester used in everyday work

• Reading CAN bus errors
• Reading DTC/fault codes
• Reading real-time parameters/Live DATA/Graphics
• Reading VIN numbers
• Reading driver numbers and versions
• Reading the stored waveform in memory of various components
• Adaptation of components
• Adaptation of controllers
• Component training
• Forced commissioning of components
• Resumption of work Pumps,windmills,mechanisms
• Operation of EGR exhaust gas reciculation systems
• Operation/burning/adaptation of DPF particulate filters
• Support for ADBLUE and the entire EKO infrastructure in vehicles
• Support for service modes, i.e.:
• reset of the service control,
• service control reset- In kilometers and time
• Brake pad service settings
• setting of the electric handbrake
• pump and ABS venting mode
• calibration of the steering wheel position sensor
• Turn angle sensor calibration
• programming of Injectors
• battery programming
• Key programming (list available_)
• NIVO programming, Airmatic/pneumatic suspension
• calibration of the gearbox
• calibration of pneumatic components
• Activation of hidden functions (highlighting of corners, cruise control, etc. )
• Reset mode after an accident

Ladies and Gentlemen, the set includes ready-made hardware after full configuration with the Laptop. To avoid any misunderstandings. LAPTOPS ARE USED. At this price, we have no other option. Computers come from PL distribution network, have ORIGINAL SOFTWARE Windows.

You gain:

1. Equipment ready for use
2. Legal Windows Software
3. Complete software ready to go
4. Complete cables (OBD,USB,Power supply)

FUNCTIONS AVAILABLE FOR THE DEVICE;

• OIL reset
• DPF regeneration
• ABS/blocks- replacement mode
• BATTERY encoding
• Transmission adaptation reset
• coding of injectors
• steering angle sensor encoding
• encoding of the suspension position/height sensor
• adpathy of front lamps
• adaptation of EGR and throttle
• reset modes transport
• reset imobilizer
• Airbag reset (of course if you do not need to disassemble the controller)
• Window reset/sunroof adaptation
• Reset vehicle personalization settings i.e. locks, lighting(leaving home)
• Navigation memory reset (so-called data cleaning)

Here we will list the functions that THIS tester WILL NOT DO

-interference in memory of Eprom state kilometers.

-Flash the driver memory and upload it to the driver you are using from another vehicle.

-Increase in vehicle power

-change the main menu language, if there is no choice, then we have the need to code a service device for a specific brand.

-full encoding of lamps from the USA, I note that full, because sometimes it is possible to program lamps front and back not anymore, or vice versa.

-Problem brands IVECO since 2014, Jaguar,Land rover (02-11), Adblue system in PSA group (boxer 2.0 hdi euro6, Jumper) , tanks. Mercedes SBC until 07r, FCA ignition lock in 1.3 JTD only manually),Replacement of GOLF 8 pads,Passat b8 after lift,no BMW G series and Mercedes after w213

Unfortunately there are no perfect equipment, remember this

The price is dictated by the quality of the diagnostic device, 2 plate design, with NEC relays, In principle, the best possible configuration, resistant to motherboard surges.

Included:

1. Diagnostic interface MULTIDIAG PRO
2. ODB2 cable.
3. USB cable.
4. Installation Instructions
5. LAPTOP WITH SOFTWARE-READY TO WORK

Specifications