Diagnostikos testeris Vgate vLinker MC+ OBD2 ELM327, skirtas iOS ir Android

Trumpai apie prekę

Prekė: Diagnostikos testeris Vgate vLinker MC+ OBD2 ELM327, skirtas iOS ir Android. Kategorija: Diagnostikos testeriai ir sąsajos.

• Gamintojas: Vgate
• Modelis: VG-MC4-BMW-FORD

✅ Flagship model: The Vgate vLinker MC series is an improved version of the Vgate iCar Pro, specifically for encoding an application that requires a large amount of data transmission.

✅ Supports both SW-CAN and MS-CAN: The device can additionally access these proprietary networks for General Motors and Ford Group cars, in addition to 5 standard OBD-II protocols.

✅ Nthe latest LE: bluetooth chip that is fully compatible with phones with both Android and iOS

✅ Fully automatic: The interface turns on automatically when the engine starts and goes into sleep mode 30 minutes after it goes out.

✅ Top chip MIC331X: Very high quality chip supporting more chips than ELM327, ELM329 or STN while ensuring full compatibility with them.

✅ Regular updates: Vgate brand interfaces are among the few on the market that offer regular software updates. This interface will be a good choice for the future.

✅ More than 100 000 satisfied customers in Poland: the most popular diagnostic interface in the country with an extremely strong supportive community.

✅ Best Application Support: Vgate continuously works with multiple dedicated application publishers to ensure that each subsequent software update is compatible with current and future car models.

✅ Instructions and application in Polish: printed and folded instructions are located in the middle of the box, while the application can be downloaded from the App Store or Play Store.

✅ Vgate vLinker MC+ Bluetooth OBD2 turns your iOS, Android or Windows mobile device, tablet, laptop or computer into an advanced diagnostic tool, performance monitor and gives you the ability to code.

✅ Byte OBD request up to 1024 bytes, fully meets the needs of even special communications.

✅ USART data buffer up to 2000 bytes, transmission speed increased to 500Kbps. Compared to its predecessors, is faster, more reliable and more functional.

✅ Fully compatible with AT ELM command set (ELM327, ELM329) and ST command set (STN).

❗ The interface works with all passenger vehicle models with a standard OBD2 connector. Europe: petrol cars since 2001, diesel cars since 2004.

❓ App compatibility:

• Full compatibility with Bimmercode, Bimmer-tool, Bimmerlink
• Full compatibility with the Forscan app
• Full compatibility with OPL Monitor
• Full compatibility with the AlfaOBD app for cars: Fiat / Alfa Romeo / Lancia / Chrysler / Dodge / Ram / Jeep
• Full compatibility with the Multiecuscan application
• MS CAN protocol support - for Ford vehicles (FORScan MS CAN)
• SW CAN protocol support - for General Motors vehicles: Opel, Saab, Chevrolet, Vauxhall, Holden, Buick, Cadillac, GMC, Pontiac, Saturn, Oldsmobile, Hummer
• For Ford vehicles: Supports 99% of models after 2000 and about 92% of models after 1996.
• Compatible with MotoScan for BMW motorcycles

Full compatibility with CarScanner - encoding:

• Volkswagen, Audi, Skoda, Seat MQB platform
• Volkswagen, Audi, Skoda, Seat MLB-EVO platform
• Volkswagen, Audi, Skoda, Seat PQ26 platform
• Volkswagen Touareg NF FL (2015-2018)
• Volkswagen Tiguan and FL (2013-2018)
• Hyundai/Kia with CAN bus.
• Mitsubishi Outlander II, XL, III
• General Motors (Opel, Chevrolet, Vauxhall, Holden) with CAN bus

❓ What applications does the interface support?

vLinker was created mainly for Bimmercode i FORScana, but it also works with other applications available on the market, such as:

• CarScanner;
• Torque;
• Piston;
• JScan: For Jeep, Chrysler, Dodge;
• OPL MONITOR; For Opel cars;
• OBD Auto Doctor;
• DashCommand;

⚙ Supported protocols:

• ISO 15765-4 (CAN 250/500 kbps, 11/29 bit)
• ISO 14230-4 (Keyword Protocol 2000)
• ISO 9141-2 (Asian, European, Chrysler)
• SAE J1850 VPW (GM)
• SAE J1850 PWM (Ford)
• SAE J2411 Single-Wire CAN (SW-CAN) – standard for GM
• Medium-Speed CAN (MS-CAN) – standard for Ford
• all diagnostic protocols for BMW motorcycles

⚙ How to use the device?

• Connect the interface to the OBD port in the car, connect the device to the appropriate application and you're done! (detailed step-by-step instructions in Polish are included with the device)

❗ Full support for hybrid and electric vehicles

The vLinker MC series is fully prepared, and supports the latest models of electric and hybrid cars with their applications.

With the Car Scanner app, you can handle a very large number of electric and hybrid vehicles on the market.

⚙ There are also programs dedicated directly to each brand for example:

• Deep OBD - for BMW and VAG vehicles
• Leaf Spy Lite/Pro - for Nissan leaf series cars
• ScanMyTesla - for Tesla
• vctool.app - supports cars from the VAG group (Audi, VW, Skoda, etc. including electric cars) with MQB, MQBA0, MQBAB, MQB2020, MQB37w, MEB and MLBEvo platforms.
• Hybrid assistant - Toyota and Lexus hybrid cars
• ABRP - Application for route planning for electric cars

❓ What are we able to program using the vLinker MC+ BT4.0 interface with the Bimmercode application?

⚙ For example, we are able to program the following functions:

• activation of emergency brake lights
• activation of daytime running lamps
• Welcome Lights activation
• automatic folding/unfolding of mirrors
• duration of the alarm
• and much more (check the app for details)

⚙ In addition, the interface offers full engine diagnostics and OBD functions for all cars with OBD2:

• Reading and erasing OBD-II errors
• Deleting the CHECK ENGINE lamp
• Read error codes waiting when the MIL light is not yet on
• Reading the error codes recorded that caused the MIL lamp to light
• Reading general and manufacturer characteristic error codes
• and much more (check the app for details)

❓ Will the interface work with my phone, laptop or car radio?

The device works with all phones with Bluetooth and the Android or iOS operating system.

The interface also works with devices that have Windows and macOS operating systems.

Due to Bluetooth compatibility, some Android car radios are not supported.

Specifications