Diagnostikos įrenginys Launch X-431 PAD V su Smartlink C, J2534, lenkiška versija

Trumpai apie prekę

Prekė: Diagnostikos įrenginys Launch X-431 PAD V su Smartlink C, J2534, lenkiška versija. Kategorija: Diagnostiniai testeriai ir sąsajos.

• Gamintojas: Launch
• Modelis: SKANER INTERFEJS KOMPUTER OBD2 X431 VII

The subject of the offer is a diagnostic tester Launch X431 PAD V with SMARTLINK C

Diagnostic device is designed to work in the workshop for demanding users

The equipment is equipped with a 10 inch touch screen. The main unit has a durable housing made of plastic and rubber. It provides above-average mechanical resistance to damage during operation.

The devices come from the polish distribution of the company Launch. We have license documents for each device.

Information:

Tablet guiding software: ANDROID

working language: Polish

Hardware version: 2025 j2534,DoiP,CanFD

software version: Latest available software in Polish

update period: 12 months from the date of device activation.

Connectivity: Bluetooth (wireless)

scope of service: Passenger vehicles, commercial vehicles (up to 3.5tonnes)

wiring: A set of adapters to support older OBD connector models

Device functions:

The tester is used for comprehensive operation of vehicle electronics, provides the possibility of full diagnostics, coding, personalization of controllers and performing the main service functions of the so-called. executive functions.

Due to the enormity of inquiries and discussions on the subject. range of precise service, I will allow you to list basic, verified capabilities. However, please note that with each software update, the functionality of the tester changes and various functions can be activated. We will also list confirmed problems that can be faced by the user of a particular vehicle model.

In this model, we use the functionality of the SMARTLINK C head.

It allows for online coding and flash and, when a manufacturer has a license, replaces the original service interface.

Verified and active functions

• General system scanning: All passenger and commercial vehicles.
• Smart scanning (reading by VIN): vehicles with OBD II after 2001. The model base is constantly growing, of course, please remember that not every model will be able to verify without incorrectly after VIN
• Online coding: BMW/VAG group/MB models until 2016 model,GM (without Saab)
• Personalisation: BMW/VAG/MB Group to 2022/PSA/FCA(excluding Iveco)/Nissan/Mazda/GM
• Driver programming: Most EU and Japan brands and Ford USA and GM until 2019 (April) then full online service. USA other brands for detailed verification.
• Online PIN: BMW/VAG/Toyota/FCA/PSA(until 16r)/Renault/Nissan
• Modification in vehicle soft number: Mainly VAG Group models
• Proxy configuration/parameterization: FCA, Stelantis(PSA,Opel,FCA)/Nissan
• ONLINE programming (j2534, DoiP)

In most vehicles you can come to the same function by different routes, you can use function shortcuts, you can use the direct function so-called. the way through the controller. You can also perform general parameterization after a VIN scan.

Main capabilities of the tester used in everyday work

• Reading CAN bus errors
• Reading DTC/fault codes
• Reading real-time parameters/Live DATA/Graphics
• Reading VIN numbers
• Reading driver numbers and versions
• Reading the stored waveform in the memory of various components
• Adaptation of components
• Adaptation of controllers
• Component training
• Forced commissioning of components
• Resumption of work Pumps,windmills,mechanisms
• Operation of EGR exhaust gas reciculation systems
• Operation/firing/adaptation of DPF particulate filters
• Support for ADBLUE and the entire EKO infrastructure in vehicles
• Support for service modes, i.e.:
• reset of the service control,
• service control reset- In kilometers and time
• Brake pad service settings
• setting of the electric handbrake
• pump and ABS venting mode
• calibration of the steering wheel position sensor
• Turn angle sensor calibration
• programming of Injectors
• battery programming
• Key programming (list available_)
• NIVO programming, Airmatic/pneumatic suspension
• calibration of the gearbox
• calibration of pneumatic components
• Activation of hidden functions (highlighting of corners, cruise control, etc. )
• Reset mode after an accident
• ONLINE FUNCTIONS
• SGW(GATEWAY) -FCA group

The tester has the so-called. Maintence Funkction, i.e. derived shortcuts to support selected service functions from the device desktop, without having to enter the controller after a full scan of the vehicle

• OIL reset
• DPF regeneration
• ABS/blocks- replacement mode
• BATTERY encoding
• Transmission adaptation reset
• coding of injectors
• steering angle sensor encoding
• Suspension position/height sensor encoding
• adpathy of front lamps
• adaptation of EGR and throttle
• reset modes transport
• reset imobilizer
• Airbag reset (of course if you do not need to disassemble the controller)
• Window reset/sunroof adaptation
• Reset vehicle personalization settings i.e. locks, lighting(leaving home)
• Navigation memory reset (so-called data cleansing)

SET COMPOSITION

• Protective case
• SMARTLINK C ONLINE head
• Main Unit/ 10 inch Tablet
• OBD 16 pin Bluetooth interface
• Slider Obd for hard-to-reach sockets/grommet
• Charger for tablet
• Authorization documents and licensing codes
• Car charger
• Table of contents of the suitcase
• User manual
• Adapters for older OBDs

Each model from Launch has a Bluetooth interface, in addition, the set is enriched with OBD adapters supporting older types of connectors.

The set includes all the cables needed to connect vehicles from each model year

• Mercedes 38 pin round
• Mercedes 14 pin
• BMW 20 pin round
• Honda 3 pin
• Kia 20 pin
• Ford 6+1
• Audi 4 pin
• Nissan 16/14 pin
• Fiat 3 pin
• PSA old
• Toyota 17 and 22 pin
• Hyundai 12 and 18 pin
• Mazda 17pin
• GM 12 pin
• Chrysler 6 pin
• Suzuki 3 pin
• Ssangyong 20 pin
• Subaru 9 pin

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Launch
Parametry	Product weight with unit packaging	3.4 kg
Parametry	EAN (GTIN)	5904954302430
Parametry	Manufacturer code	SKANER INTERFEJS KOMPUTER OBD2 X431 VII