Belaidis gręžtuvas-suktuvas AKU 4A, bešepetėlinis, su komplektu

Trumpai apie prekę

Prekė: Belaidis gręžtuvas-suktuvas AKU 4A, bešepetėlinis, su komplektu. Kategorija: Akumuliatoriniai suktuvai-gręžtuvai.

• Gamintojas: Abrams
• Modelis: WIERTARKO WKRĘTARKA BEZSZCZOTKOWA Z UDAREM

✅ FROM THE FIRST USE YOU FEEL THE DIFFERENCE – HIGH POWER, STABLE OPERATION IS THE QUALITY THAT TRANSLATES INTO THE EFFECT

• Brushless motor
• Rotary torque 70Nm
• Speed up to 1650 rpm
• Strong Stroke
• Steel head
• 2 batteries 4Ah 10 cells
• Battery charge indicator
• Engine brake
• Trigger lock
• 25-degree clutch
• Led backlight
• Fast charging
• 3 Operating modes

SET CONTAINING LITERALLY EVERYTHING ❗

✅ BRUSHLESS MOTOR? POWER AND LIFESPAN THAT JUST PAYS OFF!

Are you looking for a tool that: does not lose power during hard work, after a while does not require constant service and allows you to finish tasks without interruptions?

• This is not a marketing promise — it is the result of a brushless design: less friction, less heat emission and stable operation where traditional solutions fail.

If you count time, money and peace of mind while working, it’s an investment that pays off quickly.

✅ ONE EQUIPMENT, THREE USES: YOU CHOOSE THE MODE AND DO EXACTLY WHAT YOUR PROJECT REQUIRES

Not every project ends with screwing. Most often it looks like this: you screw in, then you have to drill, and at the end you hit a wall that says “stop” – and then one device begins to get tired and the work stops.

Here this problem does not exist, because you have 3 real modes of operation that actually change the operation of the equipment:

• screwing/screwing : quick assembly and twisting without combination – you do the job efficiently and cleanly.

• Drilling: when you need to make a hole in wood or metal – stable and secure, without getting tired.

• Drilling with impact: when you hit a hard wall (wall, concrete) — the impact “kills” the material, so you do not stand still and do not burn time.

✅ No Pushing, No Pressing, No Fiddling — 70 Nm Handles It All

You know a truly powerful drill not just by its noise or speed, but by how it behaves when the material starts to offer real resistance.

• Weaker models tend to , require pressing down, and need you to "help" the tool with your own strength.

Here, the 70 Nm of torque takes that burden. The drill behaves decisively, stably, and confidently, making your work more comfortable and predictable.

• For you, this means one thing:

less effort, more control, and the feeling that you're working with equipment built for a specific job, not for compromises.

✅ WITHOUT A STROKE YOU WORK HARDER, LONGER AND... COMPLETELY UNNECESSARY

Ordinary work looks like this:

• The screw stops, you press, you correct the grip, you spin again... and that's exactly where the torment starts, not the job.

Each subsequent screw means more strength, more time and more frustration. Because the tool reaches the limit... and there's nothing left to work with.

Stroke works differently.

• It doesn’t try to “push” resistance—it just breaks it.

• Hundreds of beats per second cause the material to let go exactly where it previously blocked work.

• The screw that stood a moment ago begins to go smoothly, without stopping.

✅ TRANSMISSION IS THE “GEARBOX” OF YOUR TOOL – AND THERE IS NO ROOM FOR SOFT MATERIALS HERE

Our transmission is made of hardened steel – a hard, resistant material that does not bend under load and holds the geometry of the teeth for a long time.

• And this is crucial when the tool gets real work: baked screw, hard material, longer series of work without interruption.

Because soft transmission in such conditions quickly:

• wipes teeth,
• catches loose,
• begins to "mill" instead of transferring force,
• and you feel a decline in effectiveness and an increasing risk of failure.

Hardened steel eliminates this problem at the source: the moment from the engine goes where it is supposed to go — to work, not in wear.

✅ DO YOU WORK IN THE FIELD? 2 POWERFUL BATTERIES FOR REAL CABLE INDEPENDENCE

• Each battery has 10 cells and a total capacity of 4 Ah – a power source that allows you to work continuously for up to 90 minutes without interruption. And with 2 batteries included, this time increases 2-fold — up to 180 minutes of continuous operation.

Why are these batteries really powerful?

• More links

• More stable power delivery and less performance drops under load, so the equipment does not “weaken” halfway through the task.

Li-Ion technology:

• Faster charging, longer lifespan than traditional batteries

• no memory effect (recharge at any time)

• and minimal self-discharge, so the battery is ready even after a long break.

✅ WHEN PRECISION COUNTS, YOU CAN’T HAVE SLACK: STEEL HANDLE = STABLE GRIP — CLEAN JOB, NO TOUCH-UPS

• When precision counts, the worst is the “microloose” — the moment when the drill will minimally escape and suddenly the hole is crooked, the edge is jagged, and instead of finishing the job... you correct.

• Steel self-clamping handle acts as a secure clamp: it holds the bit/drill stably, without "swimming" and without accidental loosening under load. This makes screwing and drilling predictable — exactly as you planned.

✅ IF THE MATERIAL IS DELICATE, EVERY FRACTION OF A SECOND MATTERS. ENGINE BRAKE ELIMINATES MARGIN OF ERROR

With delicate materials, you have no spare for mistake. Just a moment too long and the perfect surface is broken.

Engine brake eliminates margin of error,

• because it stops the rotation almost immediately after releasing the trigger. For you, this means one thing:

precise finish, less damage and confidence that you finish your work cleanly – without stress and without corrections.

✅ DO YOU HAVE LITTLE TIME? THIS STATION CHARGES SO FAST THAT DOWNTIME IS NO LONGER AN ISSUE

A good charging station not only replenishes energy – it keeps the pace of your work.

• When the 4Ah battery regains full readiness in 1,5 hours, downtime ceases to be an organizational problem, and becomes only a short break between one task and the next.

The robot does not stand, the pace does not sit down, and you do not waste time idle waiting.

✅ A SET THAT REPLACES THE ENTIRE TOOL DRAWER – YOU SPEND LESS, YOU DO MORE

• Screwdriver Abrams F-680

• 2 batteries 4ah 21v

• Fast charging station

• Wood Drill Bits: Fi6 Fi8 Fi10

• Drills for Metal: Fi6 Fi8 Fi10

• Set of 9 sockets

• Flexible extension

• Metal Wallpaper Cutter

• 10 durable blades

• Voltage Sampler Screwdriver

• Torx Screwdriver Flat Screwdriver

• Screwdriver with bit holder

• Solid Meter 7,5 M

• Insulating tape

• Combiners

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Abrams
Parametry	Power supply	rechargeable battery
Parametry	Voltage (V)	21 V
Parametry	Motor type	brushless motor
Parametry	Battery capacity	4 Ah
Parametry	Soft torque	50 Nm
Parametry	Hard torque	70 Nm
Parametry	Battery type	Li-Ion
Parametry	Maximum speed - 1st gear	550 RPM
Parametry	Maximum speed - 2nd gear	1650 RPM
Parametry	Maximum drilling diameter in wood	10 mm
Parametry	Maximum drilling diameter in metal	10 mm
Parametry	Maximum number of strokes	34000
Parametry	Number of torque ranges (x+1)	25
Parametry	Device weight	1.5 kg
Parametry	Product weight with unit packaging	7 kg
Parametry	Manufacturer code	WIERTARKO WKRĘTARKA BEZSZCZOTKOWA Z UDAREM
Parametry	EAN (GTIN)	5906954290014
Parametry	Series	WIERTARKO WKRĘTARKA WALIZKA SET PRO
Parametry	Batteries included	yes
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE
Parametry	Number of batteries	2
Parametry	Additional information	extra battery included,screw magazine,Screw-In Depth Limiter,backlit,torque adjustment,impact,transportation box included,straight screwdriver,screwdriver with revolving handle