Lieferzeit in ganz Litauen: 5-10 Werktage
Lieferpreis an die angegebene Adresse: 3 Euro
Trumpai apie prekę
Prekė: Automobilių diagnostikos skaitytuvas VPRO OBD2. Kategorija: Diagnostiniai testeriai ir sąsajos.
- Gamintojas: POWERDIAG MAXI +
- Modelis: V-Pro
We present to you the New 2026r. OBDII diagnostic interface
Version: V7.40 PRO
Production : 06.2026 (JUNE 2026)
A simple, fast device for car diagnostics ideal for private users as well as for more advanced users. The tester has a lot of functions useful for diagnosing a fault.
✅DIAGNOSTIC TESTER OBDII V7.40 PRO (06.2026)!!
- 11 Languages: Polish, English, Russian, Spanish, Dutch, French, German,. Italian, Portuguese, Chinese, Japanese
- Color display 2.8 inch
- Very easy and intuitive menu
- NO SUBSCRIPTIONS
- LIFETIME LICENSE
- NO STARTUP COUNTER
- NO NEED TO INSTALL APPLICATIONS
- self-sufficient device - you no longer have to carry your laptop with you
- Sturdy device housing equipped with silicone sides of the housing
- Very small weight of the device
- Ready to work at any time - no batteries required, power download is when connected to the vehicle.
- DATABASE OF OVER 40000 FAULT CODES
- SERVICE FOR MORE THAN 55 VEHICLE BRANDS
- It will easily delete CHECK ENGINE and much more.
⚠ ATTENTION!
Why should I buy v7.40?
- Latest motherboard 2026 PRO version V7.40
- Improved large color screen 2.8 inch - readable and clear
- Improved, thicker cable with obd2 plug
- Additionally installed the latest chip to improve the speed of the device
- Using lighter, yet stronger materials to reduce the weight of the housing
- A lot of new functionalities of the device described below
- UNLIMITED LICENSE
- NO SUBSCRIPTIONS
- DATABASE OF OVER 40000 FAULT CODES
- SERVICE FOR MORE THAN 55 VEHICLE BRANDS
- Everything you need is at hand
▶ FUNCTIONS OF THE DEVICE:
- READ FAULT CODES - Tester reads errors that occurred in the vehicle and presents them on the screen
- ACCESS TO A DATABASE OF OVER 40000 FAULT CODES
- ERROR DELETE - Removes errors saved in the driver in the vehicle engine
- DELETES CHECK ENGINE - yellow engine light on dashboard
- FROZEN FRAMES - remembers readings from some sensors when an error occurs. Analysis of data from the "frozen frame" allows you to accurately determine the circumstances in which the error occurred.
- I/M STATUS - represents the state of systems related to vehicle emissions.
- PERFORMANCE TEST
- VEHICLE INFORMATION
- BATTERY VOLTAGE READING
- READING DATA IN REAL TIME INCLUDING :
- Engine speed (RPM).
- Calculated load value.
- Coolant temperature.
- Vehicle speed.
- Short-term fuel correction.
- Long-term fuel correction.
- Pressure in the intake manifold.
- Ignition advance angle.
- Intake air temperature.
- Air flow.
- Throttle position.
- Lambda probe voltages / associated short-term fuel corrections.
- The state of the fuel system.
- Fuel pressure.
- A lot of others.
- LAMBDA PROBE TEST
- VEHICLE VIN READING
- TEST MODE 6 - Component monitoring tests - Allows you to check the test results of individual sensors and components before the "Check Engine" light comes on.
- TEST MODE 8 - Uses solenoid valves to check that the system maintains pressure correctly and there are no leaks.
- CLOUD PRINTING - after scanning with the phone camera, it is possible to print data downloaded from the tester from a mobile phone.
- Most of the above functions work depending on the vehicle model and year.
▶ FUNCTION MODE 6:
Mode 6 takes the results of tests on powertrain components related to exhaust emissions that are not continuously monitored. This mode does not force the vehicle computer to perform tests, but only retrieves the results from the latest tests stored in the computer memory.
- Oil life
- Oil level
- Battery condition
- Fluid temperature in the gearbox
- Tyre pressure
- Lambda probes
- Catalysts
- Exhaust gas recirculation system (EGR)
- Fuel vapour emission system
- Vapour Flow Monitor
- Lambda probe heaters
- Heated catalysts
- Secondary air system
- Fuel system
- Ignition Loss Detection Monitor
⚙ The interface is a universal device and works with almost all models of vehicles with a standard OBD2/EOBD connector.
Car brands supported by the interface:
- American OBD2 owners produced after 1996
- European OBD2 produced after 2003
- *FRENCH AFTER 2006!
- Asian OBD2-positive products manufactured after 2007
✅Support for CAN protocols:
- SAE J1850 PWM (41.6 kbaud)
- SAE J1850 VPW (10.4 kbaud)
- ISO9141-2 (5 bit, 10.4 kbaud)
- ISO14230-4 KWP (5 bit init,10.4 kbaud)
- ISO14230-4 KWP (fast init,10.4 kbaud)
- ISO15765-4 CAN (11 bit, 500 kbaud)
- ISO15765-4 CAN (29-bit, 500 kbaud)
- ISO15765-4 CAN (11-bit, 250 kbaud)
- ISO15765-4 CAN (29-bit, 250 kbaud)
✅Supported languages:
- Polish, English, Russian, Spanish, Dutch, French, German,. Italian, Portuguese, Chinese, Japanese
- When it comes to translation into Polish, there may be no Polish characters or a partial lack of translation of what will be constantly corrected and monitored.
- Truck service - BRAK
- Support for Russian cars - BRAK
- Handling of vans - ONLY some copies
Cars that cannot be used by this device:
- Fiat Croma, Alfa Romeo 159, Renault Clio 2 / Megane 1, Opel Corsa C, Dacia Logan, Volkswagen Golf V / Golf IV / Skoda with 1.2 MPI and 1.4 MPI engines with simensa / Ford B-MAX controller
The not tester supports advanced diagnostic systems such as DPF, AIRBAG error reset, ABS error removal or assigning a remote control (key) to the car. It is a simple device used to quickly read error codes, which is always easily accessible.
It is worth noting that deleting the error does not fix the car, but only removes the error from the system memory. If there is any fault in the vehicle, the CHECK ENGINE light may re-ignite or will not go out.
✅ To use the tester, simply locate the OBD2 socket, turn on the ignition and then connect the device to the socket and enjoy the working equipment.
Product parameters
- Operating Voltage: DC 9-16V
- Operating Current: 34~51mA
- Working environment: -20～60℃
- Storage temperature: -20～60℃
- Overall dimensions: 173*91,7*25 mm
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | POWERDIAG MAXI + |
| Parametry | Product weight with unit packaging | 0.7 kg |
| Parametry | EAN (GTIN) | 5905999100906 |
| Parametry | Manufacturer code | V-Pro |
| Parametry | Customs tariff code | 90268020 |
| Parametry | Batteries included | no |