Automobilio trapecinis keltuvas 2T su guma ir skratymo rankenėle

Trumpai apie prekę

Prekė: Automobilio trapecinis keltuvas 2T su guma ir skratymo rankenėle. Kategorija: Trapeciniai keltuvai.

• Gamintojas: Forsage
• Modelis: 51917

✅CAR LIFTER TRAPEZOIDAL LEVER 2000kg

+ ratchet knob, rubber, bag

✅ Practical, durable and efficient

✅ Lifting height - cars have chassis at different heights, so this lift is able to lift the vehicle up to 390mm, allowing you to lift many types of cars

✅ Leverage - small equipment that fits into the trunk, is able to lift up to 2 tons, so it will be great for lifting passenger cars

✅ Minimum height - the lift has been designed in such a way as to allow lifting of cars with low suspension - from 115 mm

We recommend lubricating the mechanism before the first use to extend the life of the lift!

With the scissor lift, you can easily and quickly adjust the height of your vehicles. Thanks to the handy crank and the slightly working spindle, changing tires is now child's play.

Solid base plate provides additional stability.

version in practical packaging- , bag

+ rubber + knob

Certificates: CE

Compact lift that fits in the trunk

✅ Solid construction - the lift is made of durable materials, making it able to lift vehicles efficiently and safely

✅ Compact - due to its small size, the lift will fit in the trunk, under the seat or elsewhere in the car, allowing you to use it on the road

✅ Easy operation - the included lever allows you to lift and lower the lift. Just spin it in the right direction for your needs

Lifting capacity: 2000 kg

Minimum height: 115mm

Maximum height: 400 mm

Weight: 2,69 kg

⚡ Wide range of lifting

✔ The lifter is designed to lift universal cars with suspension not lower than 115 mm

✔ The maximum height to which the vehicle is able to lift is 400 mm, so you can easily replace the wheel or check the condition of the chassis

This lift is a mobile replacement for frog lifts, the transport of which in the trunk could be problematic

⚡ Rubber cap

✔ The tangential position of the lift with the vehicle has been additionally coated with rubber so as not to scratch the chassis during operation

✔ Visible in the rubber the recess allows you to attach the lift to the intended place in the chassis of the car

The lift should stand on a sufficiently hard ground. Do not use the lift on soft or sloping surfaces. If it is a soft surface, place a large and hard object under the jack. (Example: iron plate, wooden board, brick, etc. ). Otherwise, the jack will dig in due to the soft floor and will not be able to support the vehicle. When the vehicle is supported, the lift is skewed and poses a threat.

1. To ensure normal use of the lift, keep it clean and lubricate the lift threads.
2. Align the vehicle frame support points: At the edge of the vehicle frame, which is located on both sides near the wheel, there is a lift contact support point. The lifting position of the lift must be at the support point, otherwise it is difficult to fix the vehicle and it is easy to damage the lift or even the chassis.
3. The lifting process should be even and slow: If we do the lifting force too quickly, the lift can easily be deformed or even damaged, it can not be used.

Specifications