Automobilio keltuvas JACK FROG 2,5T su teleskopiniu ratų raktu

Trumpai apie prekę

Prekė: Automobilio keltuvas JACK FROG 2,5T su teleskopiniu ratų raktu. Kategorija: Prailgintojai (varlės).

• Gamintojas: Tagred
• Modelis: TA253TA219

Necessary in the home garage, as well as in the car workshop, tire service or vehicle service station - Low profile lift TAGRED with a lifting capacity of 2,5 tons is made of the best rolled steel sheets, which are combined into special profiles that increase the stiffness of the construction .

The very low initial height makes the TAGRED lift ideal for handling any car, including motor vehicles with reduced suspension - it will slide even under a passenger car subjected to tuning of the suspension lowering to 85 mm!

✅ Composition of the set

• Frog type hydraulic lifter + Wheel wrench TA219
• Overlays (rubbers)
• Head (extension)
• 500 mm long lifting handle with rubber non-slip overlay in Soft Touch technology
• Transport handle
• Instruction in Polish

✅ Technical data - Lift

• Hydraulic lift type "frog"
• Model: TA253S
• Materials: steel, stainless steel, plastic
• Max. Lifting capacity: 2,5T
• Overflow safety valve: YES

✅ Technical data - Wheel wrench

• Telescopic wrench for wheels
• Model: TA219
• End of key - stem for cap: 1/2"
• Made of high quality steel CHROME VANADIUM(CrV)
• Wrench length 38-53 cm
• Length of sockets 17-19/21-23/ - 55mm

✅ Lifting range

• height min. without rubber overlay: 85 mm
• height min. with rubber cap: 95 mm
• max. height without rubber overlay 355 mm
• max. height with rubber cap 388 mm

✅ Lift dimensions:

• Width: 200 mm
• Length without handle: 520 mm
• Weight: 11 kg

✅ Package Dimensions:

• Length: 560 mm
• Width: 230 mm
• Height: 140 mm

➡ See this product live!

Film presentation of the product! We invite you to watch:

https://www.youtube.com/watch?v=ubIvizDvy2w

Copy the link above and paste it into the top bar of your browser.

• Wrench ending at 1/2’’ adapted to any sockets of this size
• Made of high quality CHROME VANADIUM(CV) steel
• N17-19/ 21-23 mm mm size caps suitable for most vehicle brands
• Looses the most baked screws
• Double-pressure lever extendable up to a length of 53 cm
• Perfect for car workshop and home garage
• The wrench is equipped with a ball that locks the cap during work.
• Long rubber non-slip handle - combined with a sensationally balanced center of gravity makes the key TAGRED great in the hand and does not slip out!

Composition of the set

• Telescopic wrench for wheels
• 2 caps (17-19/ 21-23 mm)!

Technical data

• Model: TA219
• End of key - stem for cap: 1/2"
• Made of high quality steel CHROME VANADIUM(CrV)
• Wrench length 38-53 cm
• Length of sockets 17-19/21-23/ - 55mm

• Before replacing the wheel, make sure that the handbrake is pulled and the car is on an even surface.
• Before lifting the car, loosen the screws on the wheels with a wrench.
• Lift the car and unscrew the screws using the wrench.
• Cleans screw threads and oil - this will protect them from
• rusting.
• Put on the spare wheel, use the wrench to screw the screws slightly.
• After leaving the car from the lift, tighten the screw firmly with a wrench
• diagonally.
• Keep the key clean, it will last longer :)

➡️ Safety First!

To ensure our customers' safety, we are the only ones who install a cylinder with a much larger diameter in our jacks. This provides a lifting capacity of up to 2500KG – ensuring safe and stable operation of the lift during wheel changes or other tasks.

We have also equipped our lift with a pressure relief safety valve and increased its wheel spacing to 200 mm, which significantly enhances safety!

Yes, TAGRED jacks are even more stable when lifting a car.

➡ Wide and stable wheels!

Wide wheels increase the stability of the lift during operation, better distribute the weight of the vehicle and make it easier to move the jack even on an uneven garage or workshop floor.

☝ Free! Rubber rings!

In the set to the lift we add gratis - high quality two rubber (high and low) 50mm and 55mmprotecting vehicle thresholds! It is a practical addition that significantly extends the life of both the lift and the vehicle itself.

✅ Ergonomic transport handle

Ergonomic transport handle made of high quality plastic is mounted on round guides, and not, as in most competitive lifts, loaded on screws.

✅High parameters and high quality!

Thanks to the modern construction based on the use of the best quality materials, it was possible to achieve high parameters, work culture while reduction of the weight of the lift.

➡ Why choose this lift?

• Made from high-quality materials
• Reinforced construction
• Lifting capacity 2500 kg
• Castors
• Ergonomic transport handle made of high quality plastic
• Bearing swivel casters make it easy to maneuver the jack under the vehicle
• Overflow safety valve
• Definitely larger actuator
• Reliable
• Free included: rubber (high and low), head - extension!

☝ A product that exceeds expectations!

❓ Frequently Asked Questions ❓

1 Is the lift suitable for low-suspension vehicles?

Yes! The minimum lifting height is 85 mm, so you can easily slide it under sports cars and vehicles after tuning with lowered suspension.

2 What is the maximum lift capacity?

The TAGRED TA253 lift has a lifting capacity of up to 2500 kg (2,5T) – ideal for passenger cars, most SUVs and light commercial vehicles.

3 Are there protective rubbers included?

Yes! The set includes 2 rubber covers to protect your vehicle's thresholds and an extension head - all included.

4 Does the lift have a safety valve?

Of course. The overflow safety valve used protects against overload and ensures stable and safe operation

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Product weight with unit packaging	12 kg
Parametry	Brand	Tagred
Parametry	Manufacturer code	TA253TA219
Parametry	EAN (GTIN)	5903293513040
Parametry	Lifting capacity	2500 kg
Parametry	Minimum lifting height	85 mm
Parametry	Maximum lifting height	365 mm