Automobilinis stiprintuvas EDB1000.1, 1 kanalas, 1000W, su 25 mm² laidais ir RX1800 kondensatoriumi

Trumpai apie prekę

Prekė: Automobilinis stiprintuvas EDB1000.1, 1 kanalas, 1000W, su 25 mm² laidais ir RX1800 kondensatoriumi. Kategorija: Stiprintuvai.

• Gamintojas: Edge
• Modelis: EDB1000.1+CRK25+RX1800

✅ READY-MADE ASSEMBLY KIT – AMPLIFIER + CABLES + CAPACITOR

Building an efficient Car Audio system does not end with buying an amplifier. To use its full potential, you need properly selected wiring and stable power supply.

That is why we have prepared a ready-made set consisting of:

✔ Amplifier EDGE EDB1000.1

✔ Professional Crunch CRK25 cable set

✔ Renegade RX1200 1.2 Farada capacitor

When buying a set, you do not need to analyze the cross-section of wires, choose a capacitor or complete elements from several different offers. All components have been properly selected, so you can safely and quickly mount the entire Car Audio system.

🔊 EDGE AMPLIFIER EDB1000.1 – 1000 IN PURE POWER RMS

EDGE EDB1000.1 is a modern Class D monoblock designed to power subwoofers. Thanks to stable operation at 1 Ω and 1000 W RMS power, it is perfect for both everyday Car Audio installations and more demanding systems focused on strong, dynamic bass.

The modern class D design ensures high efficiency, low heat release and compact dimensions for easy installation. The amplifier is equipped with an active crossover, Subsonic filter, Bass Boost adjustment and a wired bass level adjustment remote control, so you can precisely adjust its operation to your preferences.

Technical specification

• Model: EDGE EDB1000.1-E9
• Type: Monoblock
• Number of Channels: 1
• Amplifier Class: D
• RMS power at 4 Ω: 1 × 400 W
• RMS power at 2 Ω: 1 × 650 W
• RMS power at 1 Ω: 1 × 1000 W
• Maximum power: 2000 W
• Minimum Impedance: 1 Ω
• Frequency Response: 15 Hz – 250 Hz
• Low Pass Filter (LPF)
• Subsonic filter
• Crossover adjustment range: 15 – 250 Hz
• Bass Boost Adjustment
• Regulation of Gain
• Remote control for bass level adjustment
• Fuses: 3 × 35 A
• Dimensions: 46 × 275 × 205 mm

🔌 CRUNCH CRK25 – PROFESSIONAL WIRING 25 MM²

Even the most powerful amplifier will not work at full capacity if it is connected with too thin or poorly selected wires.

Properly selected cables have a huge impact on the operation of the amplifier. The greater its power, the greater the current it draws from the battery. Too thin wires cause voltage drops, limit the power achieved and can lead to overheating of the installation.

Therefore, we choose the right cross-section of wires for each set, so that the amplifier can work stably, safely and use its full capabilities.

Contents of CRUNCH CRK25

• Power cord 25 mm² – 5 m
• 25 mm² mass cable – 0,8 m
• Double shielded RCA cable with REM cable – 5 m
• Mini ANL fuse holder
• Fuse 80 A
• Eyelet tips
• Mounting accessories

What are the individual wires used for?

✔ Power cord – supplies energy from the battery to the amplifier.

✔ Bulk cable – ensures proper closure of the circuit and stable operation of the device.

✔ RCA cable – transmits the audio signal from the radio to the amplifier.

✔ REM cable – automatically starts the amplifier when the radio is turned on.

✔ Fuse – protects the electrical system from the effects of short circuit and overload.

⚡ RENEGADE CAPACITOR RX1800 – EVEN MORE ENERGY SUPPLY FOR POWERFUL CAR AUDIO SYSTEMS

In more powerful Car Audio systems, the amplifier during dynamic bass beats can temporarily draw very large current from the car’s electrical system. This causes short-term voltage drops, which can affect the stability of the entire system.

Renegade RX1800 is a Multi-Array capacitor with a capacity of approximately 1,8 Farada, designed for efficient Car Audio installations. It stores electricity and quickly gives it away in moments of greatest demand for electricity. Thanks to this, it helps stabilize the supply voltage, reduces temporary voltage drops and improves the operating conditions of the amplifier.

Technical specification

• Model: Renegade RX1800
• Type: Multi-Array Capacitor
• Capacity: 18 × 10 000 µF (approx. 1,8 F)
• Operating Voltage: 12 to 15 V DC
• Digital 3-digit voltage display
• Low internal resistance
• Black Aluminum Housing
• Dimensions: 90 × 52 × 210 mm

The most important advantages

✔ Stabilizes the power supply voltage of the amplifier.

✔ It stores energy and gives it away during temporary increased power consumption.

✔ Reduces short-term voltage drops with strong bass beats.

✔ Helps relieve the electrical system of the car.

✔ Clear digital voltage indicator.

✔ Ideal for high-performance Car Audio systems.

Note: The capacitor does not increase the power of the amplifier. Its task is to stabilize the power supply and provide better operating conditions for the entire audio system.

⭐ WHY CHOOSE THIS SET?

✔ All elements have been properly selected.

✔ You do not need to complete products from several different offers.

✔ The right cross-section of wires ensures safe operation of the installation.

✔ Capacitor helps maintain stable voltage during heavy load.

✔ Save time and money.

✔ Ready-made assembly kit immediately after unpacking.

✔ Certainty of proper cooperation of all elements.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Edge
Parametry	Model	EDB1000.1+CRK25+RX1800
Parametry	Number of channels	1-channel
Parametry	Amplifier class	D
Parametry	Manufacturer code	EDB1000.1+CRK25+RX1800
Parametry	Rated RMS power	1000 W
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE