Lieferzeit in ganz Litauen: 5-10 Werktage
Lieferpreis an die angegebene Adresse: 3 Euro
Trumpai apie prekę
Prekė: Automobilinis stiprintuvas 1800W EDBX18000.1 su 35mm² laidais ir RX1800 kondensatoriumi. Kategorija: Stiprintuvai.
- Gamintojas: Edge
- Modelis: EDBX1800.1+RX35KIT+RX1800
✅ READY-MADE ASSEMBLY KIT – AMPLIFIER + CABLES + CAPACITOR
A powerful Car Audio system requires not only an efficient amplifier, but also properly selected wiring and stable power supply. Only the combination of these elements allows you to take full advantage of the capabilities of the entire system.
That is why we have prepared a ready-made set consisting of:
✔ Amplifier EDGE EDBX1800.1
✔ Professional cable set Renegade RX35KIT 35 mm²
✔ Renegade RX1800 1.8 Farada capacitor
When buying a set, you do not have to think about choosing a cross-section of wires, the right capacitor or completing products from several different offers. All components have been selected to ensure safe installation and full use of the amplifier's capabilities.
🔊 EDGE AMPLIFIER EDBX1800.1 – 1800 IN RMS FOR DEMANDING CAR AUDIO SYSTEMS
EDGE EDBX1800.1 is a modern class D monoblock designed for high-performance bass systems. It offers up to 1800 W RMS at 1 Ω, thanks to which it can easily drive powerful 12", 15" subwoofers and extensive Car Audio configurations.
The modern class D design ensures high efficiency, low heat release and stable operation even under very high loads. The amplifier is equipped with an active LPF crossover, Subsonic filter, Bass Boost adjustment, remote control for bass level adjustment and RCA output for system expansion.
Technical specification
- Model: EDGE EDBX1800.1
- Type: Monoblock
- Number of Channels: 1
- Amplifier Class: D
- RMS power at 4 Ω: 1 × 650 W
- RMS power at 2 Ω: 1 × 1200 W
- RMS power at 1 Ω: 1 × 1800 W
- Maximum power: 3600 W
- Minimum Impedance: 1 Ω
- Frequency Response: 10 Hz – 180 Hz
- Low Pass Filter (LPF)
- Subsonic filter
- Crossover adjustment range: 0 – 180 Hz
- Bass Boost Adjustment
- Regulation of Gain
- Remote control for bass level adjustment
- RCA Input
- RCA Output
- Recommended external fuse: 180 A
- Dimensions: 63 × 363 × 179 mm
🔌 RENEGADE RX35KIT – PROFESSIONAL WIRING 35 MM²
Even the most powerful amplifier will not work at full capacity if it is connected with too thin or poorly selected wires.
Properly selected cables have a huge impact on the operation of the amplifier. The greater its power, the greater the current it draws from the battery. Too thin wires cause voltage drops, limit the power achieved and can lead to overheating of the installation.
Therefore, we choose the right cross-section of wires for each set, so that the amplifier can work stably, safely and use its full capabilities.
Contents of RX35KIT
- 35 mm² power cord – 5 m
- 35 mm² – 0,8 m mass cable
- Double shielded RCA cable with REM cable – 5 m
- Fuse holder ANL
- Fuse ANL
- Eyelet tips
- Mounting accessories
What are the individual wires used for?
✔ Power cord – supplies energy from the battery to the amplifier.
✔ Bulk cable – ensures proper closure of the circuit and stable operation of the device.
✔ RCA cable – transmits the audio signal from the radio to the amplifier.
✔ REM cable – automatically starts the amplifier when the radio is turned on.
✔ Fuse – protects the electrical system from the effects of short circuit and overload.
⚡ RENEGADE CAPACITOR RX1800 – STABLE POWER SUPPLY FOR POWERFUL SYSTEMS
During dynamic bass beats, the amplifier can temporarily draw a very large current from the car’s electrical system. At such moments, there may be short-term voltage drops that affect the stability of the system.
The Renegade RX1800 stores electricity and quickly gives it away when there is the greatest demand for electricity. Thanks to this, it helps stabilize the supply voltage, reduces temporary voltage drops and improves the operating conditions of the amplifier and the entire Car Audio installation.
Technical specification
- Model: Renegade RX1800
- Capacity: 1,8 Farada
- Digital Voltage Display
- Operating Voltage: 12 to 15 V
- Aluminum housing
- Low internal resistance
The most important advantages
✔ More stable voltage during strong bass.
✔ Reducing temporary voltage drops.
✔ Energy storage and instant donation.
✔ Better working conditions of the amplifier.
✔ Recommended for powerful Car Audio systems.
Note: The capacitor does not increase the power of the amplifier. Its task is to stabilize the power supply and improve the operation of the entire audio system.
⭐ WHY CHOOSE THIS SET?
✔ All elements have been properly selected.
✔ You do not need to complete products from several different offers.
✔ 35 mm² cables provide adequate current flow for the 1800 W RMS amplifier.
✔ Capacitor helps maintain stable voltage during heavy load.
✔ Save time and money.
✔ Safe installation.
✔ Ready set for installation immediately after unpacking.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | Edge |
| Parametry | Model | EDBX1800.1+RX35KIT+RX1800 |
| Parametry | Number of channels | 1-channel |
| Parametry | Amplifier class | D |
| Parametry | Manufacturer code | EDBX1800.1+RX35KIT+RX1800 |
| Parametry | Rated RMS power | 1800 W |
| Parametry | Packaging status | original |
| Parametry | Certificates of conformity | CE |