Automobilinis keltuvas žemo profilio, vieno stūmoklio, 3000 kg, 140-460 mm

Trumpai apie prekę

Prekė: Automobilinis keltuvas žemo profilio, vieno stūmoklio, 3000 kg, 140-460 mm. Kategorija: Prailgintojai (varlės).

• Gamintojas: Wuber
• Modelis: W22035 PODNOŚNIK SAMOCHODOWY ŻABA 3T 85-615mm

► LIFTING CAPACITY 3 TONS | ► LIFTING RANGE 140-460 MM | ► SINGLE PISTON | ► WEIGHT 22 KG | ► STEEL CONSTRUCTION 7MM | ► RUBBER SADDLE COVER | ► WIDE FRONT WHEELS | ► GEAR-DRIVEN RELEASE VALVE | ►SAFETY VALVE

⚙ TECHNICAL SPECIFICATION:

Producer: WUBER

Model: W22048

Maximum lifting capacity: 3000 kg (3T)

Lifting range: 140-460 mm

Hydraulic system: Single piston

Weight of the device: 22 kg

Screw hardness class: 8.8

✅ PROFESSIONALISM THAT YOU WILL APPRECIATE IN YOUR GARAGE

✅ LOW PROFILE - Lift with lifting range 140-460 mm, ideal for cars with low ground clearance.

✅ Convenient operation without bending down – Lower and lift the car by turning the lever left or right! No more removing the tube and looking for a valve, as in traditional jacks. Save time and your spine.

✅ Real lifting capacity of 3 tons - Reliable in lifting passenger cars, indispensable in every garage.

✅ Powerful cylinder - Efficient hydraulic mechanism for quick and easy lifting.

✅ Easy oil change - Quick maintenance and venting, no specialized assistance.

✅ High attention to detail - Precisely designed components, sturdy brackets and rubber overlay.

⭐ WHY IS THIS MODEL CONSIDERED A LEADER IN ITS CLASS?

✅ 140-460 mm ► A wide range of work is your guarantee of versatility – you will raise everything you currently need.

✅ Screw hardness class 8.8 ► Each fastener has been selected to withstand overloads much higher than the nominal one.

✅ Protection for your vehicle ► The rubber saddle cover and foam cover on the handle protect the thresholds and doors from accidental scratches.

✅ Long handle 127 cm ► Deep access to the car at the right angle.

✅ Weight of the device 22 kg ► Trust the massive structure made of thick steel, which provides stability impossible to achieve for light market lifts.

⭐ SOLID MACHINE FOR SPECIAL TASKS

✅ Built-in Safety Valve ► The system will not allow you to lift a load exceeding the permissible standards, taking care of your safety.

✅ Rotating rear wheels ► Make it easier to maneuver the lift even on uneven floors or paving stones.

✅ Powder coating ► A thick layer of varnish protects the steel from corrosion and workshop chemistry.

✅ Massive saddle with rubber overlay ► A large contact area with the chassis guarantees reliable support for the construction point of the car.

✅ Precision drain valve ► Integrated with the handle mechanism allows for smooth and controlled lowering of the load, without .

⭐ WHY CHOOSE OUR EQUIPMENT?

✔ Our lifts are made of the highest quality materials and using proven technological solutions,

As a result, they are widely considered to be the most advantageous choice in their price range.

► High quality – the weight of 22 kg speaks for itself, there are no savings on the material.

► Attention to detail – machine-welded welds ensure aesthetics and durability.

► Equipment of the well-established brand – you join thousands of satisfied users.

► Full access to spare parts – your equipment will last for years.

► Door to door - we will do everything for you!

⭐ BET ON PROVEN EQUIPMENT FROM THE RENOWNED BRAND WUBER ⭐

⭐ GEAR-DRIVEN RELEASE VALVE

❌ Traditional jacks require removing the tube from the socket and applying it to a separate bottom screw to leave the car.

The GEAR-DRIVEN RELEASE VALVE mechanism is a fixed system of two steel gears that connects the lift handle directly to the internal hydraulic valve.

When you turn the tube left or right, the wheels immediately rotate the valve needle. You control the whole process from one position, without bending over.

⚡ WORK WITHOUT BENDING DOWN!

✔ You turn the tube to the left, and the teeth immediately open the oil return channel in the actuator.

✔ You leave the car quickly with one hand movement, without having to kneel next to the vehicle.

✔ You do not waste time constantly moving the handle from the pump seat to the drain valve.

✔ This allows you to finish replacing wheels or repairing brakes faster and have a free afternoon to rest with your family.

⭐ EQUIPPED WITH SAFETY VALVE:

✔ Automatically cuts off the pressure and blocks the possibility of further lifting if the load exceeds the permissible limit of 3 tons.

✔ This protects the actuator and the entire structure from overload.

⚡ TROUBLE-FREE SINGLE PISTON DESIGN

The use of a simple system with one actuator significantly reduces the number of seals and moving parts, thanks to which you get highly leak-resistant equipment, the servicing of which is fast, cheap and trouble-free.

⚡ LOW PROFILE AND HIGH RANGE

Most lifts on the market are either small "frogs" for passenger cars or large jacks for buses.

✔ This model connects the two worlds.

• 140 mm allows you to handle tuned BMW or Honda.

• 460 mm allows you to lift an SUV or van high enough to work freely with the suspension or exhaust system.

⭐ ERGONOMICS AND WORK CULTURE

When designing this model, we focused on your comfort.

✔ The split handle allows you to operate deep under the car, providing a lot of leverage.

✔ The foam cover is a detail that saves the paint of your car from accidentally hitting the metal drawbar.

⚡ SAVE ON SERVICES – DO THE WORK YOURSELF AND SAFELY

• ✔ Replace wheels, tires

• ✔ Repair the exhaust system

• ✔ Replace engine oil

• ✔ Check the braking system

• ✔ You will perform a regular inspection of the condition of the car

• ✔ Repair suspension

• ✔ Replace worn-out parts such as swing arms, joints and more

⭐ OPERATION OF THE LIFT SIMPLE AND USER-FRIENDLY

► The use of SIMPLE CONTROL MECHANISM device, enables fast and efficient lifting and lowering

► LOWERING is just as easy — just turn the handle, to lower the pressure, avoiding a sudden that could damage the car

💡 YOUR SAFETY IS OUR TOP PRIORITY

Remember one crucial safety rule. A hydraulic jack is designed for lifting vehicles, not for holding them up for extended periods.

• ❗❗ To safely work under your car, you absolutely need to use workshop stands (jack stands).

Never go under a vehicle supported only by a jack. You must support the load with jack stands to be 100% sure the vehicle won't fall, endangering your health or life.

You can find our tested jack stands in our other listings – ensure you have a complete safety set today.

❗❗ DON’T WAIT FOR THE PRICE TO RISE!

Invest in equipment that is likely to last you for years, providing peace of mind and safety during every seasonal wheel change.

✔ SET INCLUDES:

• ► Hydraulic lift 3T W22048 Wuber

• ► Split handle (127 cm) with protective foam

• ► User manual in Polish

• ► Original Manufacturer's Packaging

Specifications