Lieferzeit in ganz Litauen: 5-10 Werktage
Lieferpreis an die angegebene Adresse: 3 Euro
Trumpai apie prekę
Prekė: Apsauginė juosta 10 m x 60 mm su klijais, 330 g, pontonams, SUP, baidarėms. Kategorija: Priedai.
- Gamintojas: Bars
- Modelis: Przyklejany
10m Protective strip black 60mm for pontoon + Adhesive Professional PU312 330 g
10m x 60mm Protective Strip BLACK For Pontoon Perfectly Strengthens Pontoon and Boat
We offer you an original protective strip for inflatable boats and kayaks.
✅ High quality material
This strip is designed to strengthen the bottom and sides of a pontoon or kayak and guarantees safety using equipment on rivers and reservoirs with a rocky bank or bottom or with a large number of branches in the water. Strengthening the bottom of the pontoon increases resistance to damage up to 300%. The strip is made of abrasion-resistant, flexible material that perfectly absorbs shock and protects against mechanical damage.
It is very easy to stick even for a person who has never done it.
✅ Universal use
Ideal for inflatable boats, boats, as well as other watercraft. Provides extra protection on any type of surface
Price quoted for 10 m/b
To stick these strips we recommend using PU312 glue, WHICH IS INCLUDED
Adhesive Professional PU312 can 330g
Polyurethane adhesive for repairing and modifying inflatables, trampolines, etc. This adhesive is used in the manufacture of inflatables in factories and is recommended for sticking various handles, accessories and slats to the inflatables.
Designed for quick and reliable repair of PVC products that are used outdoors. In sea or fresh water. Resistant to UV rays.
Recommended for quick and qualitative repair in both tourist and home conditions:
- PVC material inflatables
- sticking accessories and slats to strengthen the bottom of the pontoon
- SUP boards
- trampolines
- tarpaulins
- Commercial pavilions
- pumped and expansion pools
- Inflatables for the Playground
- tourist tents, kayaks, canoes, catamarans and sports and tourist footwear
Cold gluing method:
- Mark the spot under the patch. Cut a patch of fabric or PVC film in a size that is 4-5 cm larger than the place of damage.
- Clean and degrease the patch and the place under the patch.
- Apply a thin layer of glue to both surfaces to be glued.
- Dehumidify 5-10 minutes. Apply a second layer of glue and dry for 3-5 minutes. It is important to correctly determine the moment when the adhesive viscosity begins to disappear (check without touching the finger), put the patch in place and press firmly. We recommend leaving the gluing place under pressure for 3-4h. Glued equipment can be used after 3-4h.
Hot bonding method (WE RECOMMEND):
When hot glueing, we increase temperature resistance and it will no longer be tearable :) Even a hair dryer is enough to heat it
- Mark the spot under the patch. Cut a patch of fabric or PVC film in a size that is 4-5 cm larger than the place of damage.
- Clean and degrease the patch and the place under the patch.
- Apply a thin layer of glue to both surfaces to be glued.
- Dehumidify 5-10 minutes. Apply a second layer of glue and dry5-10 minutes.
- Preheat the glued surfaces to 60 °С, place the patch in place and press firmly. Glued equipment can be used after 20 minutes.
Recommendation and recommendations:
Operating temperature of glued equipment from – 40 °С to +80 °С. Repair at temperatures greater than 10 °С. Store and transport at temperatures from – 10 °С to + 30 °С. Fresh glue is removed with spirit or acetone. The maximum effect is achieved after 24 hours. FLAMMABLE ATTENTION! Keep out of reach of children. Work should be carried out in a ventilated room and avoid access to fire.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Manufacturer code | 22049 |
| Parametry | Model | Przyklejany |
| Parametry | Brand | Bars |
| Parametry | Kind | board |
| Parametry | For | pontoons and boats |