48V 10Ah 13S3P Li-ion T-DC akumuliatorių blokas elektriniams paspirtukams ir dviračiams

Trumpai apie prekę

Prekė: 48V 10Ah 13S3P Li-ion T-DC akumuliatorių blokas elektriniams paspirtukams ir dviračiams. Kategorija: Dviračių baterijos ir įkraunamos baterijos.

• Gamintojas: no brand
• Modelis: 13S3P-48V-10Ah-T-DC
• Įtampa: 48 V
• Ilgis: 23 cm
• Aukštis: 6 cm
• Talpa: 10 Ah
• Svoris: 1.8 kg

Basic technical parameters

• Nominal voltage: 48V
• Cell configuration: 13S3P (13 in series, 3 in parallel)
• Rated capacity: 10000mAh
• Output connector type: T-DC (separated charging and discharging circuits)
• Main application: replacement battery for electric bicycles and electric scooters

Five key performance features

1. Large energy storage capacity The 10000mAh capacity provides a long driving range on a single full charge, reduces the frequency of necessary charges.
2. Safe and stable operation Built-in BMS board protects the package from overcharging, over-discharge, short circuit and current overload, minimizes the risk of failure.
3. Long cycle life High quality cells support hundreds of charge and discharge cycles, after a long period of use, the capacity drops very slowly.
4. High energy efficiency Low internal resistance allows for stable high current output, without power drops when driving uphill or with a load.
5. Resistance to a wide temperature range Effortless operation both in cold winter temperatures and under the influence of high summer temperatures.

External dimensions

• Height: 225 mm (8.86 inches)
• Side width: 61 mm (2.40 inches)
• Depth: 67 mm (2.64 inches)

Main groups of compatible devices

1. Electric bikes – electric assisted bike, fatbike, mountain bike e-MTB
2. Electric scooters – city folding and tricycle scooters
3. Low power electric motorcycles – city electric scooters
4. Low speed vehicles – golf carts, low speed touring vehicles
5. Solar energy storage facilities – electricity storage systems from photovoltaic panels
6. Emergency power supply portable – high power banks, power backup source for trips and camping

Multi-level protection system built into the battery

✅ Protection against cell overcharging

✅ Protection against over-discharge

✅ Temperature protection against overheating

✅ Protection against current overload

✅ Circuit short circuit protection

✅ Stable, safe and reliable long-term operation

Main advantages before assembly

✅ Safe operation with BMS security system

✅ Large capacity 10000mAh for long range

✅ More than 1000 duty cycles, long service life

✅ Stable operation in a wide temperature range

Step by step installation instructions

1. Preparation of the device Completely turn off the bike or electric scooter. Open the battery mounting space and check that the storage compartment is clean and dry.
2. Battery placement Insert the battery pack into the frame, holder or mounting bag, attach with tapes so that the element does not move while driving.
3. Connect the T-DC connector Plug the battery T-DC plug into the corresponding vehicle driver socket, make sure the plug is latched and there is no slack.
4. Cable protection Organize electrical wires and attach them with cable ties, preventing cables from rubbing against the frame and damaging them.
5. Connection check Carefully inspect all plugs and contacts, confirm that all connections are stable and well fixed.
6. Starting and using Turn on the device, the battery is ready to work and provides stable drive power while driving.

48V 13S3P 10000mAh battery design and quality

Basic construction

Package built in 13S3P system (13 cells in series, 3 in parallel), total 39 pieces of high quality lithium-ion cells class A 18650.

Four main advantages of construction

1. Class A cells with high energy density Actual capacity according to the designation, stable long-term power output even under load and when driving uphill.
2. Multilayer electronic protection BMS Protects the package against overcharging, over-discharge, current overload and circuit short circuit, eliminates the risk of failure and overheating.
3. Long Cyclic Life Supports more than 800 full charge and discharge cycles, maintains high energy efficiency for a long time without rapid capacity drop.
4. Wide temperature resistance Seamless stable operation at both low winter temperatures and high summer temperatures without loss of parameters.

48V 10Ah 13S3P SM Lithium-Ion Battery with Built-in BMS Protection Module. Equipped with XT60 connectors and DC socket, it is ideal for electric scooters and electric bikes. Made on 18650 cells, stable operation and long service life.

Specifications