Pristatymo terminas kiekvienai prekei nurodomas prie kainos bloko.
Pristatymas visoje Lietuvoje: nemokamas.
Trumpai apie prekę
Prekė: Žvejybinė valtis LOBSTER 310. Kategorija: Valtys.
- Gamintojas: no brand
- Modelis: LOBSTER 310
- Ilgis: 310 cm
- Plotis: 130 cm
- Svoris: 60 kg
- Spalva: white
- Medžiaga: laminate
Hello
ZybiBoats is a company with extensive experience. We have been building boats, kayaks and Canadians for nearly 20 years. Our products find customers abroad as well as on the domestic market. If you are looking for good quality at an affordable price, we are here to help.
Today I have to offer you a fishing boat 1-3 person ''Lobster 310''
The LOBSTER group boats include:
Lobster 260 boat 1-2 persons
Lobster 310 boat 1-3 persons
Lobster 380 boat 1-4 persons
The Labster 310 rowing boat is made in the technology of one coat.
The boat can be easily turned upside down and stand on it will certainly withstand, unlike two-coat boats, whose outer coats are thin and hardly any manufacturer will allow the above-mentioned test. In addition, single-walled boats are easier to repair in the event of an impact because there is access everywhere. In the case of two-coat boats, repair is difficult to carry out because the outer jacket is closed with an inner liner and there is no access to the hull from the inside. A big advantage of single-walled boats is also the ability to easily mount additional equipment t.j. additional cleat, anchor roller, rod holder, echo holder, etc.
There are also single-jacket boats on the market whose weight is much lower than ours. They weigh about 20-30% less. I would like to clearly warn against such constructions, because they are weak boats and the laminate in them is thin. Such structures will crack and crack during use. Of course, the manufacturers of such units claim that this is an asset of their boat, but please do not be fooled by such talk. We can also make lighter boats, but we are proud that our boats serve our customers with satisfaction for many years. Please also pay attention to the finish of the center of the boat. It is not without reason that manufacturers of cheap boats take little detailed photos. Usually half of the photos are photos of the hull, and the center is photographed from a distance. This is done for a simple reason, they just look terrible on the inside. Cheap single-jacket boats are usually not sanded inside, which makes large irregularities and sharp edges of the laminate visible. Such a laminated boat is dangerous because the laminate after drying is very sharp and can be injured if it is not properly processed. This process makes the boats smooth inside and can be safely used together with children.
The next issue is the use of finishing elements:
Imagine that these pseudo manufacturers can mount plastic dulki to a boat measuring 3 or 4 meters, it does not fit in your head!! . Dulls mounted directly to the flange in a single-jacket boat after one season are made and move. Needless to say, our solution is almost forever:)
The rubber fender profile around the boat at the competition is thinner and most often it is simply put on hot and nothing more. This solution causes the profile to fall, and on a sunny day when the fender heats up, it already behaves like a tape at all.
TRANSPORT OPTIONS:
Departures are organized after collecting several boats. During the season, trips are organized every 2-4 weeks.
This allows you to advertise goods that are not as described or defective.
At pseudo-producers you will not receive ANYTHING, any document, and in case of a defect or any problem you are left alone.
The stability of the boat is satisfactory, in the boat you can stand and spin calmly.
The boat is made of polyester-glass composite
Boat data:
Length - 310CM
Width - 130CM
The height of the boat from stern to bow - 40-50CM
Weight - approx. 60 kg
Displacement approx. 300kg
Maximum engine power - 5 HP, foot length S
The Lobster 310 boats come in a variety of equipment and colors.
1 flap type storage on the stern
3 buoyancy chambers
1 seat made of thick waterproof plywood covered with anti-slip
Riveted Bumper Strip
3 cleats made of hardened plastic
2 stainless steel clamps
engine reinforcement up to 5 hp
mooring ear on the bow
hull colour outside : white or grey
Hull Color Inside: Grey
There are many things you can do in the boat. As a manufacturer, we have the opportunity to retrofit the boat according to what the customer wants.
The most common equipment is:
oars
boat trailers
additional bow storage
seat back
swivel chair
stainless steel rails
stainless steel rod holder
sun visor
cabelaring - rope around the boat
tarpaulin for boats
flattening of the floor
transport wheels , mounted on the transom
additional ears ,knagi , rollers
Finally, referring to the boats from pseudo-producers, which are not lacking on allegro. They often produce boats without any technical knowledge. I saw structures without buoyancy chambers (only pasted wooden benches into the hull). They have deep respect for the safety of people sailing on such boats. It is hard to call their products boats or their manufacturers. I'd rather call them boat holes. They produce from materials of unknown origin using waste mats and fabrics from other companies purchased for pennies. They often do not issue invoices thanks to which you will document that the boat you bought is actually yours. Of course, there will be a group of people for whom several hundred zlotys difference will be more important than the quality of the product they will use and struggle with. As they say with glass, the ass also goes to wipe:)) And that's it for the end. Greetings Zybi
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | no brand |
| Parametry | Kind | rowing |
| Parametry | Manufacturer code | LOB310 |
| Parametry | Model | LOBSTER 310 |
| Parametry | Number of people | 3 |
| Parametry | Engine installation possible | yes |
| Parametry | Material | laminate |
| Parametry | Buoyancy | 350 kg |
| Parametry | Color | white |
| Parametry | Paddle holders | 2 |
| Parametry | Length | 310 cm |
| Parametry | Width | 130 cm |
| Parametry | Weight | 60 kg |
| Parametry | Packaging status | original |
| Parametry | Additional features | compartment,seats |
