Wi-Fi signalo stiprintuvas AirTies Air 4920

Trumpai apie prekę

Prekė: Wi-Fi signalo stiprintuvas AirTies Air 4920. Kategorija: Wi-Fi signalo stiprintuvai.

• Gamintojas: AirTies
• Modelis: AirTies Air 4920

(Important information)

• The amplifier is new.

Wi-Fi Extender Plus ( AirTies Air 4920 )

Wi-Fi Extender Plus is a device that increases the strength and range of the Wi-Fi signal.

• If you live in a large apartment or a two-storey single-family house, the signal of a classic modem may be insufficient. There are places where the internet is not available. Wi-Fi Extender Plus extends the range of your home Wi-Fi and provides internet access anywhere in your home.

The Wi-Fi signal quality is negatively affected :

• walls
• water tanks, e.g. aquariums
• various devices, e.g. Microwave ovens.

Wi-Fi Extender eliminates the impact of these factors by increasing the signal strength and its range.

The device works with all types of routers and modems.

Technical parameters

Wifi

• Wi-Fi Extender Plus supports 802.11ac up to 1300 Mbit/s
• Protocols: 802.11ac, 802.11n (compatible with 802.11a/b/g)

Security

• WPA2-PSK, WPA2-802.1x, WPA-PSK, WPA-802.1x

Front panel

• 5 GHz Wi-Fi Diode 2,4 GHz Wi-Fi Diode Power Diode
• WPS button

Rear panel

• 2 Gigabit Ethernet ports
• Button 0/I (on/off)
• Reset button
• Power socket

Power consumption

• Standby:5.8 In Normal Operation Mode: 8W Maximum:10.4W

Dimensions

• 100 mm (H) x 108.4 mm (L) x 41.5 mm (W) Weight 185 g

Wi-Fi Extender Plus can operate in two modes:

1. Wi-Fi signal amplifier

Wi-Fi Extender Plus does not need additional cables to connect. It can connect to the modem in two frequencies: 2.4 GHz Wi-Fi and 5GHz.

2. Access point

Wi-Fi Extender Plus can also be used as an access point. Remember that for this you need to have an Ethernet cable, which you can connect the modem with the Extender

How to install Wi-Fi Extender Plus?

1. Connect the power supply, the device must be about 2 meters from the modem
2. Turn on Wi-Fi Extender Plus with the button on the back of the case
3. Wait about 2 minutes for the add to stop flashing
4. Press the "WPS" button on your Wi-Fi Extender Plus
5. Press the "WPS" button on the modem. You only have 2 minutes for this operation
6. Wait for the 5 GHz LED to stop flashing
7. Turn off the Wi-Fi Extender Plus and unplug it from the electrical outlet
8. Place Wi-Fi Extender Plus halfway between the modem and the area where you want coverage
9. Plug the Wi-Fi Extender Plus into an electrical outlet and turn it on.Wait for the "5 GHz" LED to light up. Wi-Fi Extender Plus is already set up and ready to go. All devices connected to the Livebox/FunBox modem will automatically connect to the Wi-Fi Extender Plus.Po connecting to the modem Your wireless devices should automatically select a network for better reception.

The set includes:

• Extender
• Charger
• Cable lan

Specifications