Vieno kanalo stiprintuvas HXA-2K su 35 mm² laidais, RX1800 kondensatoriumi ir nuotoliniu valdymu

Trumpai apie prekę

Prekė: Vieno kanalo stiprintuvas HXA-2K su 35 mm² laidais, RX1800 kondensatoriumi ir nuotoliniu valdymu. Kategorija: Stiprintuvai.

• Gamintojas: Excursion
• Modelis: HXA-2K+RX35KIT+RX1800

✅ READY-MADE ASSEMBLY KIT – AMPLIFIER + CABLES + CAPACITOR

A good Car Audio system is not only a powerful amplifier. Equally important is properly selected wiring and stable power supply, which allow you to use the full capabilities of the entire set.

That is why we have prepared a ready-made set consisting of:

✔ Amplifier EXCURSION HXA-2K

✔ Renegade RX35KIT 35 mm² Cable Set

✔ Renegade RX1800 capacitor

When buying a set, you get all the most important elements needed for professional installation of the amplifier and construction of an efficient Car Audio system.

🔊 AMPLIFIER EXCURSION HXA-2K – 1200 IN RMS POWER FOR DEMANDING SYSTEMS

EXCURSION HXA-2K is a modern class D monoblock designed for high-performance bass systems. It offers 1200 W RMS at 1 Ω, high efficiency and extensive filter adjustment for powerful, dynamic and precisely controlled bass.

The included remote control allows you to conveniently adjust the bass level directly from the driver's seat. This allows you to quickly adjust the amount of bass to suit your music type and preferences, without having to change the amplifier settings.

Thanks to the compact housing with dimensions of 280 × 140 × 54 mm, the amplifier can be easily mounted under the seat, behind the back of the rear seat or in the trunk, which facilitates the aesthetic performance of the entire installation.

Technical specification

• Model: EXCURSION HXA-2K
• Type: Monoblock
• Number of Channels: 1
• Amplifier Class: D
• RMS power at 4 Ω: 1 × 400 W
• RMS power at 2 Ω: 1 × 800 W
• RMS power at 1 Ω: 1 × 1200 W
• Minimum Impedance: 1 Ω
• Frequency Response: 15 Hz – 25 kHz
• Low Pass Filter (LPF): 40 to 220 Hz
• Subsonic filter: 10 to 50 Hz
• Bass Boost Adjustment: 0 / 6 / 12 dB
• Gain adjustment: 0,2 – 5 V
• RCA Inputs
• Bass level adjustment remote control
• Short-circuit protection
• Thermal protection
• Protection against too low and too high voltage
• Dimensions: 280 × 140 × 54 mm

🔌 RENEGADE RX35KIT – PROFESSIONAL WIRING 35 MM²

Even the best amplifier will not work at full capacity if it is connected with too thin or poorly selected wires.

Properly selected cables have a huge impact on the operation of the amplifier. The greater its power, the greater the current it draws from the battery. Too thin wires cause voltage drops, limit the power achieved and can lead to overheating of the installation.

Therefore, we choose the right cross-section of wires for each set, so that the amplifier can work stably, safely and use its full capabilities.

Contents of RX35KIT

• Power cord 35 mm² – 5 m
• Mass cable 35 mm² – 0,8 m
• Double shielded RCA cable with REM cable – 5 m
• REM cable integrated with RCA cable
• Fuse holder ANL
• Fuse ANL
• Eyelet tips
• Mounting accessories

⚙ What are the individual cables used for?

✔ Power cord – supplies energy from the battery to the amplifier.

✔ Mass cable – ensures proper closure of the electrical circuit and stable operation of the device.

✔ RCA cable – transmits audio signal from the radio to the amplifier.

✔ REM cable – automatically starts the amplifier when the radio is turned on.

✔ Fuse – protects the electrical system from the effects of short circuit and overload.

⚡ RENEGADE CAPACITOR RX1800 – STABLE POWER SUPPLY FOR POWERFUL SYSTEMS

During dynamic bass beats, the amplifier can temporarily draw a very large current from the car’s electrical system. At such moments, short-term voltage drops may occur.

The Renegade RX1800 capacitor stores electricity and instantly returns it when the amplifier needs it most. Thanks to this, it helps stabilize the supply voltage, reduces temporary voltage drops and improves the operating conditions of the entire Car Audio system.

Technical specification

• Model: Renegade RX1800
• Type: Multi-Array Capacitor
• Capacity: 18 × 10 000 µF
• Digital Voltage Display
• Low internal resistance
• Rapid energy buffering
• Cable clamps up to 50 mm²
• Dimensions: 90 × 52 × 210 mm

The most important advantages

✔ More stable voltage during strong bass.

✔ Reducing temporary voltage drops.

✔ Energy storage and instant donation.

✔ Better working conditions of the amplifier.

✔ Ideal for high-performance Car Audio systems.

Note: The capacitor does not increase the power of the amplifier. Its task is to stabilize the power supply and improve the quality of operation of the entire system.

⭐ WHY CHOOSE THIS SET?

✔ All elements have been properly selected.

✔ You do not need to complete products from several different offers.

✔ 35 mm² cables ensure adequate current flow for the amplifier.

✔ Capacitor helps maintain stable voltage during heavy load.

✔ Save time and money.

✔ Ready-made assembly kit immediately after unpacking.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Excursion
Parametry	Model	HXA-2K+RX35KIT+RX1800
Parametry	Number of channels	1-channel
Parametry	Amplifier class	D
Parametry	Manufacturer code	HXA-2K+RX35KIT+RX1800
Parametry	Rated RMS power	1200 W
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE