Vielinis šepetys žoliapjovei trinkelių ir piktžolių valymui

Trumpai apie prekę

Prekė: Vielinis šepetys žoliapjovei trinkelių ir piktžolių valymui. Kategorija: Vejapjovių dalys ir priedai.

• Gamintojas: no brand
• Modelis: AG251121008336

▶ 200 MM DISC WIRE BRUSH – WEED REMOVAL AND PAVING CLEANING

✅ Load resistant carbon steel – withstands rotations up to 10 000 RPM and centrifugal force

✅ Tangled, thick wire weave – aggressive scrubbing and pulling weeds from straight surfaces

✅ Working on stone impacts – service life many times higher than traditional trimmers

✅ Universal fit – 25,4 mm hole fits most combustion scythes

✅ Double use – fits combustion scythe and large electric angle

The disc wire brush is an overlay for the combustion scythe and large angle grinder that pulls weeds out of crevices and scrubs hard surfaces. Made of carbon steel with a tangled weave, it withstands high rotations and impacts on stone – restores the cleanliness of paving stones, pavements and concrete slabs.

➡ Check the fit of the wire brush to your scythe.

➡ PULLS WEEDS FROM COBBLESTONE CREVICES

The thick, tangled weave of wire pulls weeds and moss from paving, granite and concrete slabs joints. The wire brush cleans where the line or knife cannot.

• Removes weeds from paving stones, granite and sidewalks

• Cleans grout, concrete slabs and metal surfaces

➡ Put on a wire brush and clean the pavement from weeds.

➡ DURABLE STEEL FOR HIGH REVS

The carbon steel disc is resistant to centrifugal force and rotations up to 10 000 RPM. It works normally even with impacts on stone and hard block, and its service life is many times higher than that of a regular trimmer.

• Working without damage when hitting stone

• Many times longer lifespan than traditional trimmers

➡ Replace worn-out trimmer with a wire brush with a longer lifespan.

➡ UNIVERSAL FIT 25,4 MM

The outer diameter of 200 mm and the mounting hole 25,4 mm (1 inch) make the wire brush suitable for most combustion scythes. The easiest way to check the fit is to measure the washer flange, thread diameter and its pitch.

• 25,4 mm hole fits market scythes: NAC, DEMON, TEXAS, VICTUS, LEADER

• For Stihl and Husqvarna, a reduction ring and the correct nut are used

➡ Measure the flange and thread of your scythe to select a wire brush.

➡️ Compatible with the following trimmers:

• STIHL - FS44, FS55, FS56, FS 75, FS 80, FS85, FS87, FS90, FS100, FS120, FS130, FS200, FS250, FR 450 - For the listed Stihl models, you need to purchase an M10x1.0 nut (available in our listings). After installing the reduction ring from a 25.4 mm hole to 20.0 mm, it fits FS160, FS180, FS220, FS220K, FS260, FS280, FS280K, FS290, FS300, FS310, FS350, FS400, FS450, FS460, FS480 - For the listed Stihl models, you need to purchase an M12x1.5 nut.
• HUSQVARNA - 128R, 125R, 135R, 153R, 240R, 252RX, 322R, 323R, 323RJ, 324RX, 325LX, 325R, 325RX, 325RDX, 325RJ, 325RJX, 326RX, 326RJ, 326LS, 327LS, 333R, 335LS, 335R, 336FR, 343R, 343FR, 345F, 345R, 525LS, 525LST, 535LS, 535RXT, 553RS, 535RX, 543RS, 545R, 545RX, 555RXT and 232R after August 2002.

➡ Market scythes:

• Demon RQ415 , RQ430 , RQ508 , RQ508 PRO , RQ580 , RQ580T , RQ680
• NAC - CG33N / CG260 / CG260B / CG330 / CG330B /CG360N / BCG430 / BCG260 / NCG330 / CG430N / CG430B /WLBC260B2ZXU / WLBC260-2ZTU / WLBC-520 B / WLBC580E2ZXU /BP254-10 / BP254-10-V / BP427-17-V / BP427-17B-V / BP427CA-T /BP427-16MU-T / BP427-17KA-T / BP52LMT / BP517-20-TS /BP517-20B-V / BP520 / BP520-27-T / BP520-30KA-T / BP54 /BP540-30B-V / BP540-32B-V / BC580V-2 / BP620-36-T /BP620-38KA-T / MEX540-K30 / MEX620-K38A / Ru 425
• Leader GKS 28 / GKS 300 / TMK52 / TMK521 / VKS 517
• Alko BC301 , BASS , Castorama SPS02-43BC ,Dolmar MS25 / 30 / 340 , Echo 2305 / 250 /330 / 350 / 4000 / 5000 , Falon-Tech , Garden , Gardenic ,Handy , Harder PNBC 260 - 1T / 415 - 2T ,Honda UMK425 / 431 / 435 , Kawasaki KBH27 / 34 / 43 / 48 ,Kraft&Delle, DBC250 / 290 / 300 / 340 , March-Power CG430 ,Mastiff MA850 , Mitshubishi , NAX 800B ,Parkside , Texas BC300 / BC320 / CG260 / CG330 / CG430B ,Verto , Victus BC26 / BC32 / BC36 / BC43 / BC301 ,These models have flanges on the transmission with a dimension of 25,4 mm (1 inch) and nut M10x1,25

➡ HOW TO CHECK THE FIT

• Lock the transmission and unscrew the line head
• Measure the washer flange under the head
• Measure thread diameter and pitch
• The result will indicate the mounting hole (25,4 or 20 mm) and the nut needed

➡ TECHNICAL DATA

• Outside diameter: 200 mm
• Inner diameter (hole): 25,4 mm / 1 inch
• Material: carbon steel wire
• Brush Type: Tangled
• Maximum RPM: 10 000 RPM

➡ INCLUDED

• Wire disc brush 200 mm – 1 pc.

Specifications